Just as in mathematics, a vector in GAP is any object which supports appropriate addition and scalar multiplication operations (see Chapter 61). As in mathematics, an especially important class of vectors are those represented by a list of coefficients with respect to some basis. These correspond roughly to the GAP concept of row vectors.
‣ IsRowVector( obj ) | ( category ) |
A row vector is a vector (see IsVector (31.14-14)) that is also a homogeneous list of odd additive nesting depth (see 21.12). Typical examples are lists of integers and rationals, lists of finite field elements of the same characteristic, and lists of polynomials from a common polynomial ring. Note that matrices are not regarded as row vectors, because they have even additive nesting depth.
The additive operations of the vector must thus be compatible with that for lists, implying that the list entries are the coefficients of the vector with respect to some basis.
Note that not all row vectors admit a multiplication via * (which is to be understood as a scalar product); for example, class functions are row vectors but the product of two class functions is defined in a different way. For the installation of a scalar product of row vectors, the entries of the vector must be ring elements; note that the default method expects the row vectors to lie in IsRingElementList, and this category may not be implied by IsRingElement (31.14-16) for all entries of the row vector (see the comment in IsVector (31.14-14)).
Note that methods for special types of row vectors really must be installed with the requirement IsRowVector, since IsVector (31.14-14) may lead to a rank of the method below that of the default method for row vectors (see file lib/vecmat.gi).
gap> IsRowVector([1,2,3]); true
Because row vectors are just a special case of lists, all operations and functions for lists are applicable to row vectors as well (see Chapter 21). This especially includes accessing elements of a row vector (see 21.3), changing elements of a mutable row vector (see 21.4), and comparing row vectors (see 21.10).
Note that, unless your algorithms specifically require you to be able to change entries of your vectors, it is generally better and faster to work with immutable row vectors. See Section 12.6 for more details.
The rules for arithmetic operations involving row vectors are in fact special cases of those for the arithmetic of lists, as given in Section 21.11 and the following sections, here we reiterate that definition, in the language of vectors.
Note that the additive behaviour sketched below is defined only for lists in the category IsGeneralizedRowVector (21.12-1), and the multiplicative behaviour is defined only for lists in the category IsMultiplicativeGeneralizedRowVector (21.12-2).
vec1 + vec2
returns the sum of the two row vectors vec1 and vec2. Probably the most usual situation is that vec1 and vec2 have the same length and are defined over a common field; in this case the sum is a new row vector over the same field where each entry is the sum of the corresponding entries of the vectors.
In more general situations, the sum of two row vectors need not be a row vector, for example adding an integer vector vec1 and a vector vec2 over a finite field yields the list of pointwise sums, which will be a mixture of finite field elements and integers if vec1 is longer than vec2.
scalar + vec
vec + scalar
returns the sum of the scalar scalar and the row vector vec. Probably the most usual situation is that the elements of vec lie in a common field with scalar; in this case the sum is a new row vector over the same field where each entry is the sum of the scalar and the corresponding entry of the vector.
More general situations are for example the sum of an integer scalar and a vector over a finite field, or the sum of a finite field element and an integer vector.
gap> [ 1, 2, 3 ] + [ 1/2, 1/3, 1/4 ]; [ 3/2, 7/3, 13/4 ] gap> [ 1/2, 3/2, 1/2 ] + 1/2; [ 1, 2, 1 ]
vec1 - vec2
scalar - vec
vec - scalar
Subtracting a vector or scalar is defined as adding its additive inverse, so the statements for the addition hold likewise.
gap> [ 1, 2, 3 ] - [ 1/2, 1/3, 1/4 ]; [ 1/2, 5/3, 11/4 ] gap> [ 1/2, 3/2, 1/2 ] - 1/2; [ 0, 1, 0 ]
scalar * vec
vec * scalar
returns the product of the scalar scalar and the row vector vec. Probably the most usual situation is that the elements of vec lie in a common field with scalar; in this case the product is a new row vector over the same field where each entry is the product of the scalar and the corresponding entry of the vector.
More general situations are for example the product of an integer scalar and a vector over a finite field, or the product of a finite field element and an integer vector.
gap> [ 1/2, 3/2, 1/2 ] * 2; [ 1, 3, 1 ]
vec1 * vec2
returns the standard scalar product of vec1 and vec2, i.e., the sum of the products of the corresponding entries of the vectors. Probably the most usual situation is that vec1 and vec2 have the same length and are defined over a common field; in this case the sum is an element of this field.
More general situations are for example the inner product of an integer vector and a vector over a finite field, or the inner product of two row vectors of different lengths.
gap> [ 1, 2, 3 ] * [ 1/2, 1/3, 1/4 ]; 23/12
For the mutability of results of arithmetic operations, see 12.6.
Further operations with vectors as operands are defined by the matrix operations, see 24.3.
‣ NormedRowVector( v ) | ( attribute ) |
returns a scalar multiple w = c * v of the row vector v with the property that the first nonzero entry of w is an identity element in the sense of IsOne (31.10-5).
gap> NormedRowVector( [ 5, 2, 3 ] ); [ 1, 2/5, 3/5 ]
GAP can use compact formats to store row vectors over fields of order at most 256, based on those used by the Meat-Axe [Rin93]. This format also permits extremely efficient vector arithmetic. On the other hand element access and assignment is significantly slower than for plain lists.
The function ConvertToVectorRep (23.3-1) is used to convert a list into a compressed vector, or to rewrite a compressed vector over another field. Note that this function is much faster when it is given a field (or field size) as an argument, rather than having to scan the vector and try to decide the field. Supplying the field can also avoid errors and/or loss of performance, when one vector from some collection happens to have all of its entries over a smaller field than the "natural" field of the problem.
‣ ConvertToVectorRep( list[, field] ) | ( function ) |
‣ ConvertToVectorRep( list[, fieldsize] ) | ( function ) |
‣ ConvertToVectorRepNC( list[, field] ) | ( function ) |
‣ ConvertToVectorRepNC( list[, fieldsize] ) | ( function ) |
Called with one argument list, ConvertToVectorRep converts list to an internal row vector representation if possible.
Called with a list list and a finite field field, ConvertToVectorRep converts list to an internal row vector representation appropriate for a row vector over field.
Instead of a field also its size fieldsize may be given.
It is forbidden to call this function unless list is a plain list or a row vector, field is a field, and all elements of list lie in field. Violation of this condition can lead to unpredictable behaviour or a system crash. (Setting the assertion level to at least 2 might catch some violations before a crash, see SetAssertionLevel (7.5-1).)
list may already be a compressed vector. In this case, if no field or fieldsize is given, then nothing happens. If one is given then the vector is rewritten as a compressed vector over the given field unless it has the filter IsLockedRepresentationVector, in which case it is not changed.
The return value is the size of the field over which the vector ends up written, if it is written in a compressed representation.
In this example, we first create a row vector and then ask GAP to rewrite it, first over GF(2) and then over GF(4).
gap> v := [Z(2)^0,Z(2),Z(2),0*Z(2)]; [ Z(2)^0, Z(2)^0, Z(2)^0, 0*Z(2) ] gap> RepresentationsOfObject(v); [ "IsPlistRep", "IsInternalRep" ] gap> ConvertToVectorRep(v); 2 gap> v; <a GF2 vector of length 4> gap> ConvertToVectorRep(v,4); 4 gap> v; [ Z(2)^0, Z(2)^0, Z(2)^0, 0*Z(2) ] gap> RepresentationsOfObject(v); [ "IsDataObjectRep", "Is8BitVectorRep" ]
A vector in the special representation over GF(2) is always viewed as <a GF2 vector of length ...>. Over fields of orders 3 to 256, a vector of length 10 or less is viewed as the list of its coefficients, but a longer one is abbreviated.
Arithmetic operations (see 21.11 and the following sections) preserve the compression status of row vectors in the sense that if all arguments are compressed row vectors written over the same field and the result is a row vector then also the result is a compressed row vector written over this field.
‣ NumberFFVector( vec, sz ) | ( operation ) |
returns an integer that gives the position of the finite field row vector vec in the sorted list of all row vectors over the field with sz elements in the same dimension as vec. NumberFFVector returns fail if the vector cannot be represented over the field with sz elements.
The following operations all perform arithmetic on row vectors. given as homogeneous lists of the same length, containing elements of a commutative ring.
There are two reasons for using AddRowVector (23.4-1) in preference to arithmetic operators. Firstly, the three argument form has no single-step equivalent. Secondly AddRowVector (23.4-1) changes its first argument in-place, rather than allocating a new vector to hold the result, and may thus produce less garbage.
‣ AddRowVector( dst, src[, mul[, from, to]] ) | ( operation ) |
Adds the product of src and mul to dst, changing dst. If from and to are given then only the index range [ from .. to ] is guaranteed to be affected. Other indices may be affected, if it is more convenient to do so. Even when from and to are given, dst and src must be row vectors of the same length.
If mul is not given either then this operation simply adds src to dst.
‣ AddCoeffs( list1[, poss1], list2[, poss2[, mul]] ) | ( operation ) |
AddCoeffs adds the entries of list2{poss2}, multiplied by the scalar mul, to list1{poss1}. Unbound entries in list1 are assumed to be zero. The position of the right-most non-zero element is returned.
If the ranges poss1 and poss2 are not given, they are assumed to span the whole vectors. If the scalar mul is omitted, one is used as a default.
Note that it is the responsibility of the caller to ensure that list2 has elements at position poss2 and that the result (in list1) will be a dense list.
The function is free to remove trailing (right-most) zeros.
gap> l:=[1,2,3,4];;m:=[5,6,7];;AddCoeffs(l,m); 4 gap> l; [ 6, 8, 10, 4 ]
‣ MultRowVector( list1[, poss1, list2, poss2], mul ) | ( operation ) |
The five argument version of this operation replaces list1[poss1[i]] by mul*list2[poss2[i]] for i between 1 and Length( poss1 ).
The two-argument version simply multiplies each element of list1, in-place, by mul.
‣ CoeffsMod( list1[, len1], modulus ) | ( operation ) |
returns the coefficient list obtained by reducing the entries in list1 modulo modulus. After reducing it shrinks the list to remove trailing zeroes. If the optional argument len1 is used, it reduces only first len1 elements of the list.
gap> l:=[1,2,3,4];;CoeffsMod(l,2); [ 1, 0, 1 ]
The following functions change coefficient lists by shifting or trimming.
‣ LeftShiftRowVector( list, shift ) | ( operation ) |
changes list by assigning list[i]:= list[i+shift] and removing the last shift entries of the result.
‣ RightShiftRowVector( list, shift, fill ) | ( operation ) |
changes list by assigning list[i+shift]:= list[i] and filling each of the shift first entries with fill.
‣ ShrinkRowVector( list ) | ( operation ) |
removes trailing zeroes from the list list.
gap> l:=[1,0,0];;ShrinkRowVector(l);l; [ 1 ]
‣ RemoveOuterCoeffs( list, coef ) | ( operation ) |
removes coef at the beginning and at the end of list and returns the number of elements removed at the beginning.
gap> l:=[1,1,2,1,2,1,1,2,1];; RemoveOuterCoeffs(l,1); 2 gap> l; [ 2, 1, 2, 1, 1, 2 ]
The following functions perform operations on finite fields vectors considered as code words in a linear code.
‣ WeightVecFFE( vec ) | ( operation ) |
returns the weight of the finite field vector vec, i.e. the number of nonzero entries.
‣ DistanceVecFFE( vec1, vec2 ) | ( operation ) |
returns the distance between the two vectors vec1 and vec2, which must have the same length and whose elements must lie in a common field. The distance is the number of places where vec1 and vec2 differ.
‣ DistancesDistributionVecFFEsVecFFE( vecs, vec ) | ( operation ) |
returns the distances distribution of the vector vec to the vectors in the list vecs. All vectors must have the same length, and all elements must lie in a common field. The distances distribution is a list d of length Length(vec)+1, such that the value d[i] is the number of vectors in vecs that have distance i+1 to vec.
‣ DistancesDistributionMatFFEVecFFE( mat, F, vec ) | ( operation ) |
returns the distances distribution of the vector vec to the vectors in the vector space generated by the rows of the matrix mat over the finite field F. The length of the rows of mat and the length of vec must be equal, and all entries must lie in F. The rows of mat must be linearly independent. The distances distribution is a list d of length Length(vec)+1, such that the value d[i] is the number of vectors in the vector space generated by the rows of mat that have distance i+1 to vec.
‣ AClosestVectorCombinationsMatFFEVecFFE( mat, f, vec, l, stop ) | ( operation ) |
‣ AClosestVectorCombinationsMatFFEVecFFECoords( mat, f, vec, l, stop ) | ( operation ) |
These functions run through the f-linear combinations of the vectors in the rows of the matrix mat that can be written as linear combinations of exactly l rows (that is without using zero as a coefficient). The length of the rows of mat and the length of vec must be equal, and all elements must lie in the field f. The rows of mat must be linearly independent. AClosestVectorCombinationsMatFFEVecFFE returns a vector from these that is closest to the vector vec. If it finds a vector of distance at most stop, which must be a nonnegative integer, then it stops immediately and returns this vector.
AClosestVectorCombinationsMatFFEVecFFECoords returns a length 2 list containing the same closest vector and also a vector v with exactly l non-zero entries, such that v times mat is the closest vector.
‣ CosetLeadersMatFFE( mat, f ) | ( operation ) |
returns a list of representatives of minimal weight for the cosets of a code. mat must be a check matrix for the code, the code is defined over the finite field f. All rows of mat must have the same length, and all elements must lie in the field f. The rows of mat must be linearly independent.
A list of ring elements can be interpreted as a row vector or the list of coefficients of a polynomial. There are a couple of functions that implement arithmetic operations based on these interpretations. GAP contains proper support for polynomials (see 66), the operations described in this section are on a lower level.
The following operations all perform arithmetic on univariate polynomials given by their coefficient lists. These lists can have different lengths but must be dense homogeneous lists containing elements of a commutative ring. Not all input lists may be empty.
In the following descriptions we will always assume that list1 is the coefficient list of the polynomial pol1 and so forth. If length parameter leni is not given, it is set to the length of listi by default.
‣ ValuePol( coeff, x ) | ( operation ) |
Let coeff be the coefficients list of a univariate polynomial f, and x a ring element. Then ValuePol returns the value f(x).
The coefficient of x^i is assumed to be stored at position i+1 in the coefficients list.
gap> ValuePol([1,2,3],4); 57
‣ ProductCoeffs( list1[, len1], list2[, len2] ) | ( operation ) |
Let p1 (and p2) be polynomials given by the first len1 (len2) entries of the coefficient list list2 (list2). If len1 and len2 are omitted, they default to the lengths of list1 and list2. This operation returns the coefficient list of the product of p1 and p2.
gap> l:=[1,2,3,4];;m:=[5,6,7];;ProductCoeffs(l,m); [ 5, 16, 34, 52, 45, 28 ]
‣ ReduceCoeffs( list1[, len1], list2[, len2] ) | ( operation ) |
Let p1 (and p2) be polynomials given by the first len1 (len2) entries of the coefficient list list1 (list2). If len1 and len2 are omitted, they default to the lengths of list1 and list2. ReduceCoeffs changes list1 to the coefficient list of the remainder when dividing p1 by p2. This operation changes list1 which therefore must be a mutable list. The operation returns the position of the last non-zero entry of the result but is not guaranteed to remove trailing zeroes.
gap> l:=[1,2,3,4];;m:=[5,6,7];;ReduceCoeffs(l,m); 2 gap> l; [ 64/49, -24/49, 0, 0 ]
‣ ReduceCoeffsMod( list1[, len1], list2[, len2], modulus ) | ( operation ) |
Let p1 (and p2) be polynomials given by the first len1 (len2) entries of the coefficient list list1 (list2). If len1 and len2 are omitted, they default to the lengths of list1 and list2. ReduceCoeffsMod changes list1 to the coefficient list of the remainder when dividing p1 by p2 modulo modulus, which must be a positive integer. This operation changes list1 which therefore must be a mutable list. The operations returns the position of the last non-zero entry of the result but is not guaranteed to remove trailing zeroes.
gap> l:=[1,2,3,4];;m:=[5,6,7];;ReduceCoeffsMod(l,m,3); 1 gap> l; [ 1, 0, 0, 0 ]
‣ PowerModCoeffs( list1[, len1], exp, list2[, len2] ) | ( operation ) |
Let p1 and p2 be polynomials whose coefficients are given by the first len1 resp. len2 entries of the lists list1 and list2, respectively. If len1 and len2 are omitted, they default to the lengths of list1 and list2. Let exp be a positive integer. PowerModCoeffs returns the coefficient list of the remainder when dividing the exp-th power of p1 by p2. The coefficients are reduced already while powers are computed, therefore avoiding an explosion in list length.
gap> l:=[1,2,3,4];;m:=[5,6,7];;PowerModCoeffs(l,5,m); [ -839462813696/678223072849, -7807439437824/678223072849 ]
‣ ShiftedCoeffs( list, shift ) | ( operation ) |
produces a new coefficient list new obtained by the rule new[i+shift]:= list[i] and filling initial holes by the appropriate zero.
gap> l:=[1,2,3];;ShiftedCoeffs(l,2);ShiftedCoeffs(l,-2); [ 0, 0, 1, 2, 3 ] [ 3 ]
generated by GAPDoc2HTML