ir3-cat3.xml

<?xml version="1.0" encoding="UTF-8"?>
<!--
Copyright © 2020 Google, Inc.

Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice (including the next
paragraph) shall be included in all copies or substantial portions of the
Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.
 -->

<isa>

<!--
	Cat3 Instructions: three-source ALU instructions
 -->

<bitset name="#cat3-src" size="13">
	<doc>
		cat3 src1 and src2, some parts are similar to cat2/cat4 src
		encoding, but a few extra bits trimmed out to squeeze in the
		3rd src register (dropping (abs), immed encoding, and moving
		a few other bits elsewhere)
	</doc>
	<encode type="struct ir3_register *" case-prefix="REG_"/>
</bitset>

<bitset name="#cat3-src-gpr" extends="#cat3-src">
	<display>
		{HALF}{SRC}
	</display>
	<field name="SRC" low="0" high="7" type="#reg-gpr"/>
	<pattern low="8" high="12">00000</pattern>
	<encode>
		<map name="SRC">src</map>
	</encode>
</bitset>


<bitset name="#cat3-src-const-or-immed" extends="#cat3-src">
	<override>
		<expr>{IMMED_ENCODING}</expr>
		<display>
			{IMMED}
		</display>
		<field name="IMMED" low="0" high="11" type="uint"/>
		<pattern pos="12">1</pattern>
	</override>

	<display>
		{HALF}c{CONST}.{SWIZ}
	</display>
	<field name="SWIZ" low="0" high="1" type="#swiz"/>
	<field name="CONST" low="2" high="10" type="uint"/>
	<pattern low="11" high="12">10</pattern>
	<encode>
		<map name="CONST">src->num >> 2</map>
		<map name="SWIZ">src->num &amp; 0x3</map>
		<map name="IMMED">src->uim_val</map>
	</encode>
</bitset>

<bitset name="#cat3-src-relative" extends="#cat3-src">
	<pattern low="11" high="12">01</pattern>
	<encode>
		<map name="OFFSET">src->array.offset</map>
	</encode>
</bitset>

<bitset name="#cat3-src-relative-gpr" extends="#cat3-src-relative">
	<display>
		{HALF}r&lt;a0.x + {OFFSET}&gt;
	</display>
	<field name="OFFSET" low="0" high="9" type="int"/>
	<pattern pos="10">0</pattern>
</bitset>

<bitset name="#cat3-src-relative-const" extends="#cat3-src-relative">
	<display>
		{HALF}c&lt;a0.x + {OFFSET}&gt;
	</display>
	<field name="OFFSET" low="0" high="9" type="int"/>
	<pattern pos="10">1</pattern>
</bitset>

<bitset name="#instruction-cat3-base" extends="#instruction">
	<override expr="#cat2-cat3-nop-encoding">
		<display>
			{SY}{SS}{JP}{SAT}(nop{NOP}) {UL}{NAME} {DST_HALF}{DST}, {SRC1_NEG}{SRC1}, {SRC2_NEG}{HALF}{SRC2}, {SRC3_NEG}{SRC3}
		</display>
		<derived name="NOP" expr="#cat2-cat3-nop-value" type="uint"/>
	</override>
	<display>
		{SY}{SS}{JP}{SAT}{REPEAT}{UL}{NAME} {DST_HALF}{DST}, {SRC1_NEG}{SRC1_R}{SRC1}, {SRC2_NEG}{SRC2_R}{HALF}{SRC2}, {SRC3_NEG}{SRC3_R}{SRC3}
	</display>
	<field name="SRC1_NEG" pos="14" type="bool" display="(neg)"/>
	<field name="SRC2_R" pos="15" type="bool" display="(r)"/>
	<field name="SRC3_R" pos="29" type="bool" display="(r)"/>
	<field name="SRC2_NEG" pos="30" type="bool" display="(neg)"/>
	<field name="SRC3_NEG" pos="31" type="bool" display="(neg)"/>
	<field name="DST" low="32" high="39" type="#reg-gpr"/>
	<field name="REPEAT" low="40" high="41" type="#rptN"/>
	<field name="SAT" pos="42" type="bool" display="(sat)"/>
	<field name="SRC1_R" pos="43" type="bool" display="(r)"/>
	<field name="SS" pos="44" type="bool" display="(ss)"/>
	<field name="UL" pos="45" type="bool" display="(ul)"/>
	<field name="DST_CONV" pos="46" type="bool">
		<doc>
			The source precision is determined by the instruction
			opcode.  If {DST_CONV} the result is widened/narrowed
			to the opposite precision.
		</doc>
	</field>
	<field name="SRC2" low="47" high="54" type="#reg-gpr"/>
	<!-- opcode, 4 bits -->
	<field name="JP" pos="59" type="bool" display="(jp)"/>
	<field name="SY" pos="60" type="bool" display="(sy)"/>
	<pattern low="61" high="63">011</pattern>  <!-- cat3 -->
	<derived name="HALF" expr="#multisrc-half" type="bool" display="h"/>
	<derived name="DST_HALF" expr="#dest-half" type="bool" display="h"/>
	<encode>
		<map name="SRC1_NEG">!!(src->srcs[0]->flags &amp; (IR3_REG_FNEG | IR3_REG_SNEG | IR3_REG_BNOT))</map>
		<map name="SRC1_R">extract_SRC1_R(src)</map>
		<map name="SRC2_R">extract_SRC2_R(src)</map>
		<map name="SRC3_R">!!(src->srcs[2]->flags &amp; IR3_REG_R)</map>
		<map name="SRC2_NEG">!!(src->srcs[1]->flags &amp; (IR3_REG_FNEG | IR3_REG_SNEG | IR3_REG_BNOT))</map>
		<map name="SRC3_NEG">!!(src->srcs[2]->flags &amp; (IR3_REG_FNEG | IR3_REG_SNEG | IR3_REG_BNOT))</map>
		<map name="SRC1">src->srcs[0]</map>
		<map name="DST_CONV">
			((src->dsts[0]->num >> 2) == 62) ? 0 :
			!!((src->srcs[0]->flags ^ src->dsts[0]->flags) &amp; IR3_REG_HALF)
		</map>
	</encode>
</bitset>

<bitset name="#instruction-cat3" extends="#instruction-cat3-base">
	<pattern pos="13">0</pattern>

	<derived name="IMMED_ENCODING" expr="#false" type="bool" display="h"/>

	<field name="SRC1" low="0" high="12" type="#cat3-src">
		<param name="HALF"/>
		<param name="IMMED_ENCODING"/>
	</field>
	<field name="SRC3" low="16" high="28" type="#cat3-src">
		<param name="HALF"/>
		<param name="IMMED_ENCODING"/>
	</field>
</bitset>

<bitset name="#instruction-cat3-alt" extends="#instruction-cat3-base">
	<doc>
		The difference is that this cat3 version does not support plain
		const registers as src1/src3 but does support inmidiate values.
		On the other hand it still supports relative gpr and consts.
	</doc>

	<pattern pos="13">1</pattern>

	<derived name="IMMED_ENCODING" expr="#true" type="bool" display="h"/>

	<field name="SRC1" low="0" high="12" type="#cat3-src">
		<param name="HALF"/>
		<param name="IMMED_ENCODING"/>
	</field>
	<field name="SRC3" low="16" high="28" type="#cat3-src">
		<param name="HALF"/>
		<param name="IMMED_ENCODING"/>
	</field>

	<encode>
		<map name="SRC3">src->srcs[2]</map>
		<map name="DST_CONV">false</map>
	</encode>
</bitset>

<!-- TODO find shlg.b32 -->
<bitset name="shlg.b16" extends="#instruction-cat3-alt">
	<doc>
		(src2 &lt;&lt; src1) | src3
	</doc>

	<!-- TODO check older gens -->
	<gen min="600"/>

	<pattern low="55" high="58">1011</pattern>   <!-- OPC -->
	<derived name="FULL" expr="#false" type="bool"/>
</bitset>

<bitset name="mad.u16" extends="#instruction-cat3">
	<pattern low="55" high="58">0000</pattern>   <!-- OPC -->
	<derived name="FULL" expr="#false" type="bool"/>
</bitset>

<bitset name="madsh.u16" extends="#instruction-cat3">
	<pattern low="55" high="58">0001</pattern>   <!-- OPC -->
	<derived name="FULL" expr="#true" type="bool"/>
</bitset>

<bitset name="mad.s16" extends="#instruction-cat3">
	<pattern low="55" high="58">0010</pattern>   <!-- OPC -->
	<derived name="FULL" expr="#false" type="bool"/>
</bitset>

<bitset name="madsh.m16" extends="#instruction-cat3">
	<pattern low="55" high="58">0011</pattern>   <!-- OPC -->
	<derived name="FULL" expr="#true" type="bool"/>
</bitset>

<bitset name="mad.u24" extends="#instruction-cat3">
	<pattern low="55" high="58">0100</pattern>   <!-- OPC -->
	<derived name="FULL" expr="#true" type="bool"/>
</bitset>

<bitset name="mad.s24" extends="#instruction-cat3">
	<pattern low="55" high="58">0101</pattern>   <!-- OPC -->
	<derived name="FULL" expr="#true" type="bool"/>
</bitset>

<bitset name="mad.f16" extends="#instruction-cat3">
	<pattern low="55" high="58">0110</pattern>   <!-- OPC -->
	<derived name="FULL" expr="#false" type="bool"/>
</bitset>

<bitset name="mad.f32" extends="#instruction-cat3">
	<pattern low="55" high="58">0111</pattern>   <!-- OPC -->
	<derived name="FULL" expr="#true" type="bool"/>
</bitset>

<bitset name="sel.b16" extends="#instruction-cat3">
	<pattern low="55" high="58">1000</pattern>   <!-- OPC -->
	<derived name="FULL" expr="#false" type="bool"/>
</bitset>

<bitset name="sel.b32" extends="#instruction-cat3">
	<pattern low="55" high="58">1001</pattern>   <!-- OPC -->
	<derived name="FULL" expr="#true" type="bool"/>
</bitset>

<bitset name="sel.s16" extends="#instruction-cat3">
	<pattern low="55" high="58">1010</pattern>   <!-- OPC -->
	<derived name="FULL" expr="#false" type="bool"/>
</bitset>

<bitset name="sel.s32" extends="#instruction-cat3">
	<pattern low="55" high="58">1011</pattern>   <!-- OPC -->
	<derived name="FULL" expr="#true" type="bool"/>
</bitset>

<bitset name="sel.f16" extends="#instruction-cat3">
	<pattern low="55" high="58">1100</pattern>   <!-- OPC -->
	<derived name="FULL" expr="#false" type="bool"/>
</bitset>

<bitset name="sel.f32" extends="#instruction-cat3">
	<pattern low="55" high="58">1101</pattern>   <!-- OPC -->
	<derived name="FULL" expr="#true" type="bool"/>
</bitset>

<bitset name="sad.s16" extends="#instruction-cat3">
	<pattern low="55" high="58">1110</pattern>   <!-- OPC -->
	<derived name="FULL" expr="#false" type="bool"/>
</bitset>

<bitset name="sad.s32" extends="#instruction-cat3">
	<pattern low="55" high="58">1111</pattern>   <!-- OPC -->
	<derived name="FULL" expr="#false" type="bool"/>  <!-- We think? -->
</bitset>

</isa>