CoCalc -- mach-mx25

GitHub Repository: awilliam/linux-vfio
Path: blob/master/arch/arm/mach-imx/mach-mx25_3ds.c
¹⁰⁸¹⁷ views
1
/*
2
 * Copyright 2009 Sascha Hauer, <[email protected]>
3
 *
4
 * This program is free software; you can redistribute it and/or
5
 * modify it under the terms of the GNU General Public License
6
 * as published by the Free Software Foundation; either version 2
7
 * of the License, or (at your option) any later version.
8
 * This program is distributed in the hope that it will be useful,
9
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
10
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
11
 * GNU General Public License for more details.
12
 *
13
 * You should have received a copy of the GNU General Public License
14
 * along with this program; if not, write to the Free Software
15
 * Foundation, Inc., 51 Franklin Street, Fifth Floor,
16
 * Boston, MA  02110-1301, USA.
17
 */
18

19
/*
20
 * This machine is known as:
21
 *  - i.MX25 3-Stack Development System
22
 *  - i.MX25 Platform Development Kit (i.MX25 PDK)
23
 */
24

25
#include <linux/types.h>
26
#include <linux/init.h>
27
#include <linux/delay.h>
28
#include <linux/clk.h>
29
#include <linux/irq.h>
30
#include <linux/gpio.h>
31
#include <linux/platform_device.h>
32
#include <linux/usb/otg.h>
33

34
#include <mach/hardware.h>
35
#include <asm/mach-types.h>
36
#include <asm/mach/arch.h>
37
#include <asm/mach/time.h>
38
#include <asm/memory.h>
39
#include <asm/mach/map.h>
40
#include <mach/common.h>
41
#include <mach/mx25.h>
42
#include <mach/iomux-mx25.h>
43

44
#include "devices-imx25.h"
45

46
static const struct imxuart_platform_data uart_pdata __initconst = {
47
	.flags = IMXUART_HAVE_RTSCTS,
48
};
49

50
static iomux_v3_cfg_t mx25pdk_pads[] = {
51
	MX25_PAD_FEC_MDC__FEC_MDC,
52
	MX25_PAD_FEC_MDIO__FEC_MDIO,
53
	MX25_PAD_FEC_TDATA0__FEC_TDATA0,
54
	MX25_PAD_FEC_TDATA1__FEC_TDATA1,
55
	MX25_PAD_FEC_TX_EN__FEC_TX_EN,
56
	MX25_PAD_FEC_RDATA0__FEC_RDATA0,
57
	MX25_PAD_FEC_RDATA1__FEC_RDATA1,
58
	MX25_PAD_FEC_RX_DV__FEC_RX_DV,
59
	MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
60
	MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */
61
	MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */
62

63
	/* LCD */
64
	MX25_PAD_LD0__LD0,
65
	MX25_PAD_LD1__LD1,
66
	MX25_PAD_LD2__LD2,
67
	MX25_PAD_LD3__LD3,
68
	MX25_PAD_LD4__LD4,
69
	MX25_PAD_LD5__LD5,
70
	MX25_PAD_LD6__LD6,
71
	MX25_PAD_LD7__LD7,
72
	MX25_PAD_LD8__LD8,
73
	MX25_PAD_LD9__LD9,
74
	MX25_PAD_LD10__LD10,
75
	MX25_PAD_LD11__LD11,
76
	MX25_PAD_LD12__LD12,
77
	MX25_PAD_LD13__LD13,
78
	MX25_PAD_LD14__LD14,
79
	MX25_PAD_LD15__LD15,
80
	MX25_PAD_GPIO_E__LD16,
81
	MX25_PAD_GPIO_F__LD17,
82
	MX25_PAD_HSYNC__HSYNC,
83
	MX25_PAD_VSYNC__VSYNC,
84
	MX25_PAD_LSCLK__LSCLK,
85
	MX25_PAD_OE_ACD__OE_ACD,
86
	MX25_PAD_CONTRAST__CONTRAST,
87

88
	/* Keypad */
89
	MX25_PAD_KPP_ROW0__KPP_ROW0,
90
	MX25_PAD_KPP_ROW1__KPP_ROW1,
91
	MX25_PAD_KPP_ROW2__KPP_ROW2,
92
	MX25_PAD_KPP_ROW3__KPP_ROW3,
93
	MX25_PAD_KPP_COL0__KPP_COL0,
94
	MX25_PAD_KPP_COL1__KPP_COL1,
95
	MX25_PAD_KPP_COL2__KPP_COL2,
96
	MX25_PAD_KPP_COL3__KPP_COL3,
97

98
	/* SD1 */
99
	MX25_PAD_SD1_CMD__SD1_CMD,
100
	MX25_PAD_SD1_CLK__SD1_CLK,
101
	MX25_PAD_SD1_DATA0__SD1_DATA0,
102
	MX25_PAD_SD1_DATA1__SD1_DATA1,
103
	MX25_PAD_SD1_DATA2__SD1_DATA2,
104
	MX25_PAD_SD1_DATA3__SD1_DATA3,
105
	MX25_PAD_A14__GPIO_2_0, /* WriteProtect */
106
	MX25_PAD_A15__GPIO_2_1, /* CardDetect */
107

108
	/* I2C1 */
109
	MX25_PAD_I2C1_CLK__I2C1_CLK,
110
	MX25_PAD_I2C1_DAT__I2C1_DAT,
111
};
112

113
static const struct fec_platform_data mx25_fec_pdata __initconst = {
114
	.phy    = PHY_INTERFACE_MODE_RMII,
115
};
116

117
#define FEC_ENABLE_GPIO		IMX_GPIO_NR(2, 3)
118
#define FEC_RESET_B_GPIO	IMX_GPIO_NR(4, 8)
119

120
static void __init mx25pdk_fec_reset(void)
121
{
122
	gpio_request(FEC_ENABLE_GPIO, "FEC PHY enable");
123
	gpio_request(FEC_RESET_B_GPIO, "FEC PHY reset");
124

125
	gpio_direction_output(FEC_ENABLE_GPIO, 0);  /* drop PHY power */
126
	gpio_direction_output(FEC_RESET_B_GPIO, 0); /* assert reset */
127
	udelay(2);
128

129
	/* turn on PHY power and lift reset */
130
	gpio_set_value(FEC_ENABLE_GPIO, 1);
131
	gpio_set_value(FEC_RESET_B_GPIO, 1);
132
}
133

134
static const struct mxc_nand_platform_data
135
mx25pdk_nand_board_info __initconst = {
136
	.width		= 1,
137
	.hw_ecc		= 1,
138
	.flash_bbt	= 1,
139
};
140

141
static struct imx_fb_videomode mx25pdk_modes[] = {
142
	{
143
		.mode	= {
144
			.name		= "CRT-VGA",
145
			.refresh	= 60,
146
			.xres		= 640,
147
			.yres		= 480,
148
			.pixclock	= 39683,
149
			.left_margin	= 45,
150
			.right_margin	= 114,
151
			.upper_margin	= 33,
152
			.lower_margin	= 11,
153
			.hsync_len	= 1,
154
			.vsync_len	= 1,
155
		},
156
		.bpp	= 16,
157
		.pcr	= 0xFA208B80,
158
	},
159
};
160

161
static const struct imx_fb_platform_data mx25pdk_fb_pdata __initconst = {
162
	.mode		= mx25pdk_modes,
163
	.num_modes	= ARRAY_SIZE(mx25pdk_modes),
164
	.pwmr		= 0x00A903FF,
165
	.lscr1		= 0x00120300,
166
	.dmacr		= 0x00020010,
167
};
168

169
static const uint32_t mx25pdk_keymap[] = {
170
	KEY(0, 0, KEY_UP),
171
	KEY(0, 1, KEY_DOWN),
172
	KEY(0, 2, KEY_VOLUMEDOWN),
173
	KEY(0, 3, KEY_HOME),
174
	KEY(1, 0, KEY_RIGHT),
175
	KEY(1, 1, KEY_LEFT),
176
	KEY(1, 2, KEY_ENTER),
177
	KEY(1, 3, KEY_VOLUMEUP),
178
	KEY(2, 0, KEY_F6),
179
	KEY(2, 1, KEY_F8),
180
	KEY(2, 2, KEY_F9),
181
	KEY(2, 3, KEY_F10),
182
	KEY(3, 0, KEY_F1),
183
	KEY(3, 1, KEY_F2),
184
	KEY(3, 2, KEY_F3),
185
	KEY(3, 3, KEY_POWER),
186
};
187

188
static const struct matrix_keymap_data mx25pdk_keymap_data __initconst = {
189
	.keymap		= mx25pdk_keymap,
190
	.keymap_size	= ARRAY_SIZE(mx25pdk_keymap),
191
};
192

193
static int mx25pdk_usbh2_init(struct platform_device *pdev)
194
{
195
	return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
196
}
197

198
static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
199
	.init	= mx25pdk_usbh2_init,
200
	.portsc	= MXC_EHCI_MODE_SERIAL,
201
};
202

203
static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
204
	.operating_mode = FSL_USB2_DR_DEVICE,
205
	.phy_mode       = FSL_USB2_PHY_UTMI,
206
};
207

208
static const struct imxi2c_platform_data mx25_3ds_i2c0_data __initconst = {
209
	.bitrate = 100000,
210
};
211

212
#define SD1_GPIO_WP	IMX_GPIO_NR(2, 0)
213
#define SD1_GPIO_CD	IMX_GPIO_NR(2, 1)
214

215
static const struct esdhc_platform_data mx25pdk_esdhc_pdata __initconst = {
216
	.wp_gpio = SD1_GPIO_WP,
217
	.cd_gpio = SD1_GPIO_CD,
218
};
219

220
static void __init mx25pdk_init(void)
221
{
222
	mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
223
			ARRAY_SIZE(mx25pdk_pads));
224

225
	imx25_add_imx_uart0(&uart_pdata);
226
	imx25_add_fsl_usb2_udc(&otg_device_pdata);
227
	imx25_add_mxc_ehci_hs(&usbh2_pdata);
228
	imx25_add_mxc_nand(&mx25pdk_nand_board_info);
229
	imx25_add_imxdi_rtc(NULL);
230
	imx25_add_imx_fb(&mx25pdk_fb_pdata);
231
	imx25_add_imx2_wdt(NULL);
232

233
	mx25pdk_fec_reset();
234
	imx25_add_fec(&mx25_fec_pdata);
235
	imx25_add_imx_keypad(&mx25pdk_keymap_data);
236

237
	imx25_add_sdhci_esdhc_imx(0, &mx25pdk_esdhc_pdata);
238
	imx25_add_imx_i2c0(&mx25_3ds_i2c0_data);
239
}
240

241
static void __init mx25pdk_timer_init(void)
242
{
243
	mx25_clocks_init();
244
}
245

246
static struct sys_timer mx25pdk_timer = {
247
	.init   = mx25pdk_timer_init,
248
};
249

250
MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
251
	/* Maintainer: Freescale Semiconductor, Inc. */
252
	.boot_params = MX25_PHYS_OFFSET + 0x100,
253
	.map_io = mx25_map_io,
254
	.init_early = imx25_init_early,
255
	.init_irq = mx25_init_irq,
256
	.timer = &mx25pdk_timer,
257
	.init_machine = mx25pdk_init,
258
MACHINE_END
259

260
Product

Resources

Company
