Book a Demo!
CoCalc Logo Icon
StoreFeaturesDocsShareSupportNewsAboutPoliciesSign UpSign In
awilliam
GitHub Repository: awilliam/linux-vfio
Path: blob/master/arch/arm/mach-ks8695/pci.c
10817 views
1
/*
2
* arch/arm/mach-ks8695/pci.c
3
*
4
* Copyright (C) 2003, Micrel Semiconductors
5
* Copyright (C) 2006, Greg Ungerer <[email protected]>
6
* Copyright (C) 2006, Ben Dooks
7
* Copyright (C) 2007, Andrew Victor
8
*
9
* This program is free software; you can redistribute it and/or modify
10
* it under the terms of the GNU General Public License as published by
11
* the Free Software Foundation; either version 2 of the License, or
12
* (at your option) any later version.
13
*
14
* This program is distributed in the hope that it will be useful,
15
* but WITHOUT ANY WARRANTY; without even the implied warranty of
16
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17
* GNU General Public License for more details.
18
*
19
* You should have received a copy of the GNU General Public License
20
* along with this program; if not, write to the Free Software
21
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22
*/
23
24
#include <linux/kernel.h>
25
#include <linux/pci.h>
26
#include <linux/mm.h>
27
#include <linux/init.h>
28
#include <linux/irq.h>
29
#include <linux/delay.h>
30
#include <linux/io.h>
31
32
#include <asm/signal.h>
33
#include <asm/mach/pci.h>
34
#include <mach/hardware.h>
35
36
#include <mach/devices.h>
37
#include <mach/regs-pci.h>
38
39
40
static int pci_dbg;
41
static int pci_cfg_dbg;
42
43
44
static void ks8695_pci_setupconfig(unsigned int bus_nr, unsigned int devfn, unsigned int where)
45
{
46
unsigned long pbca;
47
48
pbca = PBCA_ENABLE | (where & ~3);
49
pbca |= PCI_SLOT(devfn) << 11 ;
50
pbca |= PCI_FUNC(devfn) << 8;
51
pbca |= bus_nr << 16;
52
53
if (bus_nr == 0) {
54
/* use Type-0 transaction */
55
__raw_writel(pbca, KS8695_PCI_VA + KS8695_PBCA);
56
} else {
57
/* use Type-1 transaction */
58
__raw_writel(pbca | PBCA_TYPE1, KS8695_PCI_VA + KS8695_PBCA);
59
}
60
}
61
62
63
/*
64
* The KS8695 datasheet prohibits anything other than 32bit accesses
65
* to the IO registers, so all our configuration must be done with
66
* 32bit operations, and the correct bit masking and shifting.
67
*/
68
69
static int ks8695_pci_readconfig(struct pci_bus *bus,
70
unsigned int devfn, int where, int size, u32 *value)
71
{
72
ks8695_pci_setupconfig(bus->number, devfn, where);
73
74
*value = __raw_readl(KS8695_PCI_VA + KS8695_PBCD);
75
76
switch (size) {
77
case 4:
78
break;
79
case 2:
80
*value = *value >> ((where & 2) * 8);
81
*value &= 0xffff;
82
break;
83
case 1:
84
*value = *value >> ((where & 3) * 8);
85
*value &= 0xff;
86
break;
87
}
88
89
if (pci_cfg_dbg) {
90
printk("read: %d,%08x,%02x,%d: %08x (%08x)\n",
91
bus->number, devfn, where, size, *value,
92
__raw_readl(KS8695_PCI_VA + KS8695_PBCD));
93
}
94
95
return PCIBIOS_SUCCESSFUL;
96
}
97
98
static int ks8695_pci_writeconfig(struct pci_bus *bus,
99
unsigned int devfn, int where, int size, u32 value)
100
{
101
unsigned long tmp;
102
103
if (pci_cfg_dbg) {
104
printk("write: %d,%08x,%02x,%d: %08x\n",
105
bus->number, devfn, where, size, value);
106
}
107
108
ks8695_pci_setupconfig(bus->number, devfn, where);
109
110
switch (size) {
111
case 4:
112
__raw_writel(value, KS8695_PCI_VA + KS8695_PBCD);
113
break;
114
case 2:
115
tmp = __raw_readl(KS8695_PCI_VA + KS8695_PBCD);
116
tmp &= ~(0xffff << ((where & 2) * 8));
117
tmp |= value << ((where & 2) * 8);
118
119
__raw_writel(tmp, KS8695_PCI_VA + KS8695_PBCD);
120
break;
121
case 1:
122
tmp = __raw_readl(KS8695_PCI_VA + KS8695_PBCD);
123
tmp &= ~(0xff << ((where & 3) * 8));
124
tmp |= value << ((where & 3) * 8);
125
126
__raw_writel(tmp, KS8695_PCI_VA + KS8695_PBCD);
127
break;
128
}
129
130
return PCIBIOS_SUCCESSFUL;
131
}
132
133
static void ks8695_local_writeconfig(int where, u32 value)
134
{
135
ks8695_pci_setupconfig(0, 0, where);
136
__raw_writel(value, KS8695_PCI_VA + KS8695_PBCD);
137
}
138
139
static struct pci_ops ks8695_pci_ops = {
140
.read = ks8695_pci_readconfig,
141
.write = ks8695_pci_writeconfig,
142
};
143
144
static struct pci_bus* __init ks8695_pci_scan_bus(int nr, struct pci_sys_data *sys)
145
{
146
return pci_scan_bus(sys->busnr, &ks8695_pci_ops, sys);
147
}
148
149
static struct resource pci_mem = {
150
.name = "PCI Memory space",
151
.start = KS8695_PCIMEM_PA,
152
.end = KS8695_PCIMEM_PA + (KS8695_PCIMEM_SIZE - 1),
153
.flags = IORESOURCE_MEM,
154
};
155
156
static struct resource pci_io = {
157
.name = "PCI IO space",
158
.start = KS8695_PCIIO_PA,
159
.end = KS8695_PCIIO_PA + (KS8695_PCIIO_SIZE - 1),
160
.flags = IORESOURCE_IO,
161
};
162
163
static int __init ks8695_pci_setup(int nr, struct pci_sys_data *sys)
164
{
165
if (nr > 0)
166
return 0;
167
168
request_resource(&iomem_resource, &pci_mem);
169
request_resource(&ioport_resource, &pci_io);
170
171
sys->resource[0] = &pci_io;
172
sys->resource[1] = &pci_mem;
173
sys->resource[2] = NULL;
174
175
/* Assign and enable processor bridge */
176
ks8695_local_writeconfig(PCI_BASE_ADDRESS_0, KS8695_PCIMEM_PA);
177
178
/* Enable bus-master & Memory Space access */
179
ks8695_local_writeconfig(PCI_COMMAND, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
180
181
/* Set cache-line size & latency. */
182
ks8695_local_writeconfig(PCI_CACHE_LINE_SIZE, (32 << 8) | (L1_CACHE_BYTES / sizeof(u32)));
183
184
/* Reserve PCI memory space for PCI-AHB resources */
185
if (!request_mem_region(KS8695_PCIMEM_PA, SZ_64M, "PCI-AHB Bridge")) {
186
printk(KERN_ERR "Cannot allocate PCI-AHB Bridge memory.\n");
187
return -EBUSY;
188
}
189
190
return 1;
191
}
192
193
static inline unsigned int size_mask(unsigned long size)
194
{
195
return (~size) + 1;
196
}
197
198
static int ks8695_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
199
{
200
unsigned long pc = instruction_pointer(regs);
201
unsigned long instr = *(unsigned long *)pc;
202
unsigned long cmdstat;
203
204
cmdstat = __raw_readl(KS8695_PCI_VA + KS8695_CRCFCS);
205
206
printk(KERN_ERR "PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx [%s%s%s%s%s]\n",
207
addr, fsr, regs->ARM_pc, regs->ARM_lr,
208
cmdstat & (PCI_STATUS_SIG_TARGET_ABORT << 16) ? "GenTarget" : " ",
209
cmdstat & (PCI_STATUS_REC_TARGET_ABORT << 16) ? "RecvTarget" : " ",
210
cmdstat & (PCI_STATUS_REC_MASTER_ABORT << 16) ? "MasterAbort" : " ",
211
cmdstat & (PCI_STATUS_SIG_SYSTEM_ERROR << 16) ? "SysError" : " ",
212
cmdstat & (PCI_STATUS_DETECTED_PARITY << 16) ? "Parity" : " "
213
);
214
215
__raw_writel(cmdstat, KS8695_PCI_VA + KS8695_CRCFCS);
216
217
/*
218
* If the instruction being executed was a read,
219
* make it look like it read all-ones.
220
*/
221
if ((instr & 0x0c100000) == 0x04100000) {
222
int reg = (instr >> 12) & 15;
223
unsigned long val;
224
225
if (instr & 0x00400000)
226
val = 255;
227
else
228
val = -1;
229
230
regs->uregs[reg] = val;
231
regs->ARM_pc += 4;
232
return 0;
233
}
234
235
if ((instr & 0x0e100090) == 0x00100090) {
236
int reg = (instr >> 12) & 15;
237
238
regs->uregs[reg] = -1;
239
regs->ARM_pc += 4;
240
return 0;
241
}
242
243
return 1;
244
}
245
246
static void __init ks8695_pci_preinit(void)
247
{
248
/* make software reset to avoid freeze if PCI bus was messed up */
249
__raw_writel(0x80000000, KS8695_PCI_VA + KS8695_PBCS);
250
251
/* stage 1 initialization, subid, subdevice = 0x0001 */
252
__raw_writel(0x00010001, KS8695_PCI_VA + KS8695_CRCSID);
253
254
/* stage 2 initialization */
255
/* prefetch limits with 16 words, retry enable */
256
__raw_writel(0x40000000, KS8695_PCI_VA + KS8695_PBCS);
257
258
/* configure memory mapping */
259
__raw_writel(KS8695_PCIMEM_PA, KS8695_PCI_VA + KS8695_PMBA);
260
__raw_writel(size_mask(KS8695_PCIMEM_SIZE), KS8695_PCI_VA + KS8695_PMBAM);
261
__raw_writel(KS8695_PCIMEM_PA, KS8695_PCI_VA + KS8695_PMBAT);
262
__raw_writel(0, KS8695_PCI_VA + KS8695_PMBAC);
263
264
/* configure IO mapping */
265
__raw_writel(KS8695_PCIIO_PA, KS8695_PCI_VA + KS8695_PIOBA);
266
__raw_writel(size_mask(KS8695_PCIIO_SIZE), KS8695_PCI_VA + KS8695_PIOBAM);
267
__raw_writel(KS8695_PCIIO_PA, KS8695_PCI_VA + KS8695_PIOBAT);
268
__raw_writel(0, KS8695_PCI_VA + KS8695_PIOBAC);
269
270
/* hook in fault handlers */
271
hook_fault_code(8, ks8695_pci_fault, SIGBUS, 0, "external abort on non-linefetch");
272
hook_fault_code(10, ks8695_pci_fault, SIGBUS, 0, "external abort on non-linefetch");
273
}
274
275
static void ks8695_show_pciregs(void)
276
{
277
if (!pci_dbg)
278
return;
279
280
printk(KERN_INFO "PCI: CRCFID = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFID));
281
printk(KERN_INFO "PCI: CRCFCS = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFCS));
282
printk(KERN_INFO "PCI: CRCFRV = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFRV));
283
printk(KERN_INFO "PCI: CRCFLT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFLT));
284
printk(KERN_INFO "PCI: CRCBMA = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCBMA));
285
printk(KERN_INFO "PCI: CRCSID = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCSID));
286
printk(KERN_INFO "PCI: CRCFIT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFIT));
287
288
printk(KERN_INFO "PCI: PBM = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PBM));
289
printk(KERN_INFO "PCI: PBCS = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PBCS));
290
291
printk(KERN_INFO "PCI: PMBA = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBA));
292
printk(KERN_INFO "PCI: PMBAC = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBAC));
293
printk(KERN_INFO "PCI: PMBAM = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBAM));
294
printk(KERN_INFO "PCI: PMBAT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBAT));
295
296
printk(KERN_INFO "PCI: PIOBA = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBA));
297
printk(KERN_INFO "PCI: PIOBAC = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBAC));
298
printk(KERN_INFO "PCI: PIOBAM = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBAM));
299
printk(KERN_INFO "PCI: PIOBAT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBAT));
300
}
301
302
303
static struct hw_pci ks8695_pci __initdata = {
304
.nr_controllers = 1,
305
.preinit = ks8695_pci_preinit,
306
.setup = ks8695_pci_setup,
307
.scan = ks8695_pci_scan_bus,
308
.postinit = NULL,
309
.swizzle = pci_std_swizzle,
310
.map_irq = NULL,
311
};
312
313
void __init ks8695_init_pci(struct ks8695_pci_cfg *cfg)
314
{
315
if (__raw_readl(KS8695_PCI_VA + KS8695_CRCFRV) & CFRV_GUEST) {
316
printk("PCI: KS8695 in guest mode, not initialising\n");
317
return;
318
}
319
320
printk(KERN_INFO "PCI: Initialising\n");
321
ks8695_show_pciregs();
322
323
/* set Mode */
324
__raw_writel(cfg->mode << 29, KS8695_PCI_VA + KS8695_PBM);
325
326
ks8695_pci.map_irq = cfg->map_irq; /* board-specific map_irq method */
327
328
pci_common_init(&ks8695_pci);
329
}
330
331