Book a Demo!
CoCalc Logo Icon
StoreFeaturesDocsShareSupportNewsAboutPoliciesSign UpSign In
awilliam
GitHub Repository: awilliam/linux-vfio
Path: blob/master/arch/mips/bcm63xx/setup.c
10817 views
1
/*
2
* This file is subject to the terms and conditions of the GNU General Public
3
* License. See the file "COPYING" in the main directory of this archive
4
* for more details.
5
*
6
* Copyright (C) 2008 Maxime Bizon <[email protected]>
7
*/
8
9
#include <linux/init.h>
10
#include <linux/kernel.h>
11
#include <linux/delay.h>
12
#include <linux/bootmem.h>
13
#include <linux/ioport.h>
14
#include <linux/pm.h>
15
#include <asm/bootinfo.h>
16
#include <asm/time.h>
17
#include <asm/reboot.h>
18
#include <asm/cacheflush.h>
19
#include <bcm63xx_board.h>
20
#include <bcm63xx_cpu.h>
21
#include <bcm63xx_regs.h>
22
#include <bcm63xx_io.h>
23
24
void bcm63xx_machine_halt(void)
25
{
26
printk(KERN_INFO "System halted\n");
27
while (1)
28
;
29
}
30
31
static void bcm6348_a1_reboot(void)
32
{
33
u32 reg;
34
35
/* soft reset all blocks */
36
printk(KERN_INFO "soft-reseting all blocks ...\n");
37
reg = bcm_perf_readl(PERF_SOFTRESET_REG);
38
reg &= ~SOFTRESET_6348_ALL;
39
bcm_perf_writel(reg, PERF_SOFTRESET_REG);
40
mdelay(10);
41
42
reg = bcm_perf_readl(PERF_SOFTRESET_REG);
43
reg |= SOFTRESET_6348_ALL;
44
bcm_perf_writel(reg, PERF_SOFTRESET_REG);
45
mdelay(10);
46
47
/* Jump to the power on address. */
48
printk(KERN_INFO "jumping to reset vector.\n");
49
/* set high vectors (base at 0xbfc00000 */
50
set_c0_status(ST0_BEV | ST0_ERL);
51
/* run uncached in kseg0 */
52
change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
53
__flush_cache_all();
54
/* remove all wired TLB entries */
55
write_c0_wired(0);
56
__asm__ __volatile__(
57
"jr\t%0"
58
:
59
: "r" (0xbfc00000));
60
while (1)
61
;
62
}
63
64
void bcm63xx_machine_reboot(void)
65
{
66
u32 reg;
67
68
/* mask and clear all external irq */
69
reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG);
70
reg &= ~EXTIRQ_CFG_MASK_ALL;
71
reg |= EXTIRQ_CFG_CLEAR_ALL;
72
bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG);
73
74
if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() == 0xa1))
75
bcm6348_a1_reboot();
76
77
printk(KERN_INFO "triggering watchdog soft-reset...\n");
78
reg = bcm_perf_readl(PERF_SYS_PLL_CTL_REG);
79
reg |= SYS_PLL_SOFT_RESET;
80
bcm_perf_writel(reg, PERF_SYS_PLL_CTL_REG);
81
while (1)
82
;
83
}
84
85
static void __bcm63xx_machine_reboot(char *p)
86
{
87
bcm63xx_machine_reboot();
88
}
89
90
/*
91
* return system type in /proc/cpuinfo
92
*/
93
const char *get_system_type(void)
94
{
95
static char buf[128];
96
snprintf(buf, sizeof(buf), "bcm63xx/%s (0x%04x/0x%04X)",
97
board_get_name(),
98
bcm63xx_get_cpu_id(), bcm63xx_get_cpu_rev());
99
return buf;
100
}
101
102
void __init plat_time_init(void)
103
{
104
mips_hpt_frequency = bcm63xx_get_cpu_freq() / 2;
105
}
106
107
void __init plat_mem_setup(void)
108
{
109
add_memory_region(0, bcm63xx_get_memory_size(), BOOT_MEM_RAM);
110
111
_machine_halt = bcm63xx_machine_halt;
112
_machine_restart = __bcm63xx_machine_reboot;
113
pm_power_off = bcm63xx_machine_halt;
114
115
set_io_port_base(0);
116
ioport_resource.start = 0;
117
ioport_resource.end = ~0;
118
119
board_setup();
120
}
121
122
int __init bcm63xx_register_devices(void)
123
{
124
return board_register_devices();
125
}
126
127
arch_initcall(bcm63xx_register_devices);
128
129