Path: blob/master/arch/sh/drivers/pci/pci-sh7751.h
10819 views
/*1* Low-Level PCI Support for SH7751 targets2*3* Dustin McIntire ([email protected]) (c) 20014* Paul Mundt ([email protected]) (c) 20035*6* May be copied or modified under the terms of the GNU General Public7* License. See linux/COPYING for more information.8*9*/1011#ifndef _PCI_SH7751_H_12#define _PCI_SH7751_H_1314/* Platform Specific Values */15#define SH7751_VENDOR_ID 0x105416#define SH7751_DEVICE_ID 0x350517#define SH7751R_DEVICE_ID 0x350e1819/* SH7751 Specific Values */20#define SH7751_PCI_CONFIG_BASE 0xFD000000 /* Config space base addr */21#define SH7751_PCI_CONFIG_SIZE 0x1000000 /* Config space size */22#define SH7751_PCI_MEMORY_BASE 0xFD000000 /* Memory space base addr */23#define SH7751_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */24#define SH7751_PCI_IO_BASE 0xFE240000 /* IO space base address */25#define SH7751_PCI_IO_SIZE 0x40000 /* Size of IO window */2627#define SH7751_PCIREG_BASE 0xFE200000 /* PCI regs base address */2829#define SH7751_PCICONF0 0x0 /* PCI Config Reg 0 */30#define SH7751_PCICONF0_DEVID 0xFFFF0000 /* Device ID */31#define SH7751_PCICONF0_VNDID 0x0000FFFF /* Vendor ID */32#define SH7751_PCICONF1 0x4 /* PCI Config Reg 1 */33#define SH7751_PCICONF1_DPE 0x80000000 /* Data Parity Error */34#define SH7751_PCICONF1_SSE 0x40000000 /* System Error Status */35#define SH7751_PCICONF1_RMA 0x20000000 /* Master Abort */36#define SH7751_PCICONF1_RTA 0x10000000 /* Target Abort Rx Status */37#define SH7751_PCICONF1_STA 0x08000000 /* Target Abort Exec Status */38#define SH7751_PCICONF1_DEV 0x06000000 /* Timing Status */39#define SH7751_PCICONF1_DPD 0x01000000 /* Data Parity Status */40#define SH7751_PCICONF1_FBBC 0x00800000 /* Back 2 Back Status */41#define SH7751_PCICONF1_UDF 0x00400000 /* User Defined Status */42#define SH7751_PCICONF1_66M 0x00200000 /* 66Mhz Operation Status */43#define SH7751_PCICONF1_PM 0x00100000 /* Power Management Status */44#define SH7751_PCICONF1_PBBE 0x00000200 /* Back 2 Back Control */45#define SH7751_PCICONF1_SER 0x00000100 /* SERR Output Control */46#define SH7751_PCICONF1_WCC 0x00000080 /* Wait Cycle Control */47#define SH7751_PCICONF1_PER 0x00000040 /* Parity Error Response */48#define SH7751_PCICONF1_VPS 0x00000020 /* VGA Pallet Snoop */49#define SH7751_PCICONF1_MWIE 0x00000010 /* Memory Write+Invalidate */50#define SH7751_PCICONF1_SPC 0x00000008 /* Special Cycle Control */51#define SH7751_PCICONF1_BUM 0x00000004 /* Bus Master Control */52#define SH7751_PCICONF1_MES 0x00000002 /* Memory Space Control */53#define SH7751_PCICONF1_IOS 0x00000001 /* I/O Space Control */54#define SH7751_PCICONF2 0x8 /* PCI Config Reg 2 */55#define SH7751_PCICONF2_BCC 0xFF000000 /* Base Class Code */56#define SH7751_PCICONF2_SCC 0x00FF0000 /* Sub-Class Code */57#define SH7751_PCICONF2_RLPI 0x0000FF00 /* Programming Interface */58#define SH7751_PCICONF2_REV 0x000000FF /* Revision ID */59#define SH7751_PCICONF3 0xC /* PCI Config Reg 3 */60#define SH7751_PCICONF3_BIST7 0x80000000 /* Bist Supported */61#define SH7751_PCICONF3_BIST6 0x40000000 /* Bist Executing */62#define SH7751_PCICONF3_BIST3_0 0x0F000000 /* Bist Passed */63#define SH7751_PCICONF3_HD7 0x00800000 /* Single Function device */64#define SH7751_PCICONF3_HD6_0 0x007F0000 /* Configuration Layout */65#define SH7751_PCICONF3_LAT 0x0000FF00 /* Latency Timer */66#define SH7751_PCICONF3_CLS 0x000000FF /* Cache Line Size */67#define SH7751_PCICONF4 0x10 /* PCI Config Reg 4 */68#define SH7751_PCICONF4_BASE 0xFFFFFFFC /* I/O Space Base Addr */69#define SH7751_PCICONF4_ASI 0x00000001 /* Address Space Type */70#define SH7751_PCICONF5 0x14 /* PCI Config Reg 5 */71#define SH7751_PCICONF5_BASE 0xFFFFFFF0 /* Mem Space Base Addr */72#define SH7751_PCICONF5_LAP 0x00000008 /* Prefetch Enabled */73#define SH7751_PCICONF5_LAT 0x00000006 /* Local Memory type */74#define SH7751_PCICONF5_ASI 0x00000001 /* Address Space Type */75#define SH7751_PCICONF6 0x18 /* PCI Config Reg 6 */76#define SH7751_PCICONF6_BASE 0xFFFFFFF0 /* Mem Space Base Addr */77#define SH7751_PCICONF6_LAP 0x00000008 /* Prefetch Enabled */78#define SH7751_PCICONF6_LAT 0x00000006 /* Local Memory type */79#define SH7751_PCICONF6_ASI 0x00000001 /* Address Space Type */80/* PCICONF7 - PCICONF10 are undefined */81#define SH7751_PCICONF11 0x2C /* PCI Config Reg 11 */82#define SH7751_PCICONF11_SSID 0xFFFF0000 /* Subsystem ID */83#define SH7751_PCICONF11_SVID 0x0000FFFF /* Subsystem Vendor ID */84/* PCICONF12 is undefined */85#define SH7751_PCICONF13 0x34 /* PCI Config Reg 13 */86#define SH7751_PCICONF13_CPTR 0x000000FF /* PM function pointer */87/* PCICONF14 is undefined */88#define SH7751_PCICONF15 0x3C /* PCI Config Reg 15 */89#define SH7751_PCICONF15_IPIN 0x000000FF /* Interrupt Pin */90#define SH7751_PCICONF16 0x40 /* PCI Config Reg 16 */91#define SH7751_PCICONF16_PMES 0xF8000000 /* PME Support */92#define SH7751_PCICONF16_D2S 0x04000000 /* D2 Support */93#define SH7751_PCICONF16_D1S 0x02000000 /* D1 Support */94#define SH7751_PCICONF16_DSI 0x00200000 /* Bit Device Init. */95#define SH7751_PCICONF16_PMCK 0x00080000 /* Clock for PME req. */96#define SH7751_PCICONF16_VER 0x00070000 /* PM Version */97#define SH7751_PCICONF16_NIP 0x0000FF00 /* Next Item Pointer */98#define SH7751_PCICONF16_CID 0x000000FF /* Capability Identifier */99#define SH7751_PCICONF17 0x44 /* PCI Config Reg 17 */100#define SH7751_PCICONF17_DATA 0xFF000000 /* Data field for PM */101#define SH7751_PCICONF17_PMES 0x00800000 /* PME Status */102#define SH7751_PCICONF17_DSCL 0x00600000 /* Data Scaling Value */103#define SH7751_PCICONF17_DSEL 0x001E0000 /* Data Select */104#define SH7751_PCICONF17_PMEN 0x00010000 /* PME Enable */105#define SH7751_PCICONF17_PWST 0x00000003 /* Power State */106/* SH7715 Internal PCI Registers */107108/* Memory Control Registers */109#define SH7751_BCR1 0xFF800000 /* Memory BCR1 Register */110#define SH7751_BCR2 0xFF800004 /* Memory BCR2 Register */111#define SH7751_BCR3 0xFF800050 /* Memory BCR3 Register */112#define SH7751_BCR4 0xFE0A00F0 /* Memory BCR4 Register */113#define SH7751_WCR1 0xFF800008 /* Wait Control 1 Register */114#define SH7751_WCR2 0xFF80000C /* Wait Control 2 Register */115#define SH7751_WCR3 0xFF800010 /* Wait Control 3 Register */116#define SH7751_MCR 0xFF800014 /* Memory Control Register */117118/* General Memory Config Addresses */119#define SH7751_CS0_BASE_ADDR 0x0120#define SH7751_MEM_REGION_SIZE 0x04000000121#define SH7751_CS1_BASE_ADDR (SH7751_CS0_BASE_ADDR + SH7751_MEM_REGION_SIZE)122#define SH7751_CS2_BASE_ADDR (SH7751_CS1_BASE_ADDR + SH7751_MEM_REGION_SIZE)123#define SH7751_CS3_BASE_ADDR (SH7751_CS2_BASE_ADDR + SH7751_MEM_REGION_SIZE)124#define SH7751_CS4_BASE_ADDR (SH7751_CS3_BASE_ADDR + SH7751_MEM_REGION_SIZE)125#define SH7751_CS5_BASE_ADDR (SH7751_CS4_BASE_ADDR + SH7751_MEM_REGION_SIZE)126#define SH7751_CS6_BASE_ADDR (SH7751_CS5_BASE_ADDR + SH7751_MEM_REGION_SIZE)127128#endif /* _PCI_SH7751_H_ */129130131