Book a Demo!
CoCalc Logo Icon
StoreFeaturesDocsShareSupportNewsAboutPoliciesSign UpSign In
awilliam
GitHub Repository: awilliam/linux-vfio
Path: blob/master/drivers/block/cciss_cmd.h
15109 views
1
#ifndef CCISS_CMD_H
2
#define CCISS_CMD_H
3
4
#include <linux/cciss_defs.h>
5
6
/* DEFINES */
7
#define CISS_VERSION "1.00"
8
9
/* general boundary definitions */
10
#define MAXSGENTRIES 32
11
#define CCISS_SG_CHAIN 0x80000000
12
#define MAXREPLYQS 256
13
14
/* Unit Attentions ASC's as defined for the MSA2012sa */
15
#define POWER_OR_RESET 0x29
16
#define STATE_CHANGED 0x2a
17
#define UNIT_ATTENTION_CLEARED 0x2f
18
#define LUN_FAILED 0x3e
19
#define REPORT_LUNS_CHANGED 0x3f
20
21
/* Unit Attentions ASCQ's as defined for the MSA2012sa */
22
23
/* These ASCQ's defined for ASC = POWER_OR_RESET */
24
#define POWER_ON_RESET 0x00
25
#define POWER_ON_REBOOT 0x01
26
#define SCSI_BUS_RESET 0x02
27
#define MSA_TARGET_RESET 0x03
28
#define CONTROLLER_FAILOVER 0x04
29
#define TRANSCEIVER_SE 0x05
30
#define TRANSCEIVER_LVD 0x06
31
32
/* These ASCQ's defined for ASC = STATE_CHANGED */
33
#define RESERVATION_PREEMPTED 0x03
34
#define ASYM_ACCESS_CHANGED 0x06
35
#define LUN_CAPACITY_CHANGED 0x09
36
37
/* config space register offsets */
38
#define CFG_VENDORID 0x00
39
#define CFG_DEVICEID 0x02
40
#define CFG_I2OBAR 0x10
41
#define CFG_MEM1BAR 0x14
42
43
/* i2o space register offsets */
44
#define I2O_IBDB_SET 0x20
45
#define I2O_IBDB_CLEAR 0x70
46
#define I2O_INT_STATUS 0x30
47
#define I2O_INT_MASK 0x34
48
#define I2O_IBPOST_Q 0x40
49
#define I2O_OBPOST_Q 0x44
50
#define I2O_DMA1_CFG 0x214
51
52
/* Configuration Table */
53
#define CFGTBL_ChangeReq 0x00000001l
54
#define CFGTBL_AccCmds 0x00000001l
55
#define DOORBELL_CTLR_RESET 0x00000004l
56
#define DOORBELL_CTLR_RESET2 0x00000020l
57
58
#define CFGTBL_Trans_Simple 0x00000002l
59
#define CFGTBL_Trans_Performant 0x00000004l
60
#define CFGTBL_Trans_use_short_tags 0x20000000l
61
62
#define CFGTBL_BusType_Ultra2 0x00000001l
63
#define CFGTBL_BusType_Ultra3 0x00000002l
64
#define CFGTBL_BusType_Fibre1G 0x00000100l
65
#define CFGTBL_BusType_Fibre2G 0x00000200l
66
typedef struct _vals32
67
{
68
__u32 lower;
69
__u32 upper;
70
} vals32;
71
72
typedef union _u64bit
73
{
74
vals32 val32;
75
__u64 val;
76
} u64bit;
77
78
/* Type defs used in the following structs */
79
#define QWORD vals32
80
81
/* STRUCTURES */
82
#define CISS_MAX_PHYS_LUN 1024
83
/* SCSI-3 Cmmands */
84
85
#pragma pack(1)
86
87
#define CISS_INQUIRY 0x12
88
/* Date returned */
89
typedef struct _InquiryData_struct
90
{
91
BYTE data_byte[36];
92
} InquiryData_struct;
93
94
#define CISS_REPORT_LOG 0xc2 /* Report Logical LUNs */
95
#define CISS_REPORT_PHYS 0xc3 /* Report Physical LUNs */
96
/* Data returned */
97
typedef struct _ReportLUNdata_struct
98
{
99
BYTE LUNListLength[4];
100
DWORD reserved;
101
BYTE LUN[CISS_MAX_LUN][8];
102
} ReportLunData_struct;
103
104
#define CCISS_READ_CAPACITY 0x25 /* Read Capacity */
105
typedef struct _ReadCapdata_struct
106
{
107
BYTE total_size[4]; /* Total size in blocks */
108
BYTE block_size[4]; /* Size of blocks in bytes */
109
} ReadCapdata_struct;
110
111
#define CCISS_READ_CAPACITY_16 0x9e /* Read Capacity 16 */
112
113
/* service action to differentiate a 16 byte read capacity from
114
other commands that use the 0x9e SCSI op code */
115
116
#define CCISS_READ_CAPACITY_16_SERVICE_ACT 0x10
117
118
typedef struct _ReadCapdata_struct_16
119
{
120
BYTE total_size[8]; /* Total size in blocks */
121
BYTE block_size[4]; /* Size of blocks in bytes */
122
BYTE prot_en:1; /* protection enable bit */
123
BYTE rto_en:1; /* reference tag own enable bit */
124
BYTE reserved:6; /* reserved bits */
125
BYTE reserved2[18]; /* reserved bytes per spec */
126
} ReadCapdata_struct_16;
127
128
/* Define the supported read/write commands for cciss based controllers */
129
130
#define CCISS_READ_10 0x28 /* Read(10) */
131
#define CCISS_WRITE_10 0x2a /* Write(10) */
132
#define CCISS_READ_16 0x88 /* Read(16) */
133
#define CCISS_WRITE_16 0x8a /* Write(16) */
134
135
/* Define the CDB lengths supported by cciss based controllers */
136
137
#define CDB_LEN10 10
138
#define CDB_LEN16 16
139
140
/* BMIC commands */
141
#define BMIC_READ 0x26
142
#define BMIC_WRITE 0x27
143
#define BMIC_CACHE_FLUSH 0xc2
144
#define CCISS_CACHE_FLUSH 0x01 /* C2 was already being used by CCISS */
145
146
#define CCISS_ABORT_MSG 0x00
147
#define CCISS_RESET_MSG 0x01
148
#define CCISS_RESET_TYPE_CONTROLLER 0x00
149
#define CCISS_RESET_TYPE_BUS 0x01
150
#define CCISS_RESET_TYPE_TARGET 0x03
151
#define CCISS_RESET_TYPE_LUN 0x04
152
#define CCISS_NOOP_MSG 0x03
153
154
/* Command List Structure */
155
#define CTLR_LUNID "\0\0\0\0\0\0\0\0"
156
157
typedef struct _CommandListHeader_struct {
158
BYTE ReplyQueue;
159
BYTE SGList;
160
HWORD SGTotal;
161
QWORD Tag;
162
LUNAddr_struct LUN;
163
} CommandListHeader_struct;
164
typedef struct _ErrDescriptor_struct {
165
QWORD Addr;
166
DWORD Len;
167
} ErrDescriptor_struct;
168
typedef struct _SGDescriptor_struct {
169
QWORD Addr;
170
DWORD Len;
171
DWORD Ext;
172
} SGDescriptor_struct;
173
174
/* Command types */
175
#define CMD_RWREQ 0x00
176
#define CMD_IOCTL_PEND 0x01
177
#define CMD_SCSI 0x03
178
#define CMD_MSG_DONE 0x04
179
#define CMD_MSG_TIMEOUT 0x05
180
#define CMD_MSG_STALE 0xff
181
182
/* This structure needs to be divisible by COMMANDLIST_ALIGNMENT
183
* because low bits of the address are used to to indicate that
184
* whether the tag contains an index or an address. PAD_32 and
185
* PAD_64 can be adjusted independently as needed for 32-bit
186
* and 64-bits systems.
187
*/
188
#define COMMANDLIST_ALIGNMENT (32)
189
#define IS_64_BIT ((sizeof(long) - 4)/4)
190
#define IS_32_BIT (!IS_64_BIT)
191
#define PAD_32 (0)
192
#define PAD_64 (4)
193
#define PADSIZE (IS_32_BIT * PAD_32 + IS_64_BIT * PAD_64)
194
#define DIRECT_LOOKUP_BIT 0x10
195
#define DIRECT_LOOKUP_SHIFT 5
196
197
typedef struct _CommandList_struct {
198
CommandListHeader_struct Header;
199
RequestBlock_struct Request;
200
ErrDescriptor_struct ErrDesc;
201
SGDescriptor_struct SG[MAXSGENTRIES];
202
/* information associated with the command */
203
__u32 busaddr; /* physical address of this record */
204
ErrorInfo_struct * err_info; /* pointer to the allocated mem */
205
int ctlr;
206
int cmd_type;
207
long cmdindex;
208
struct list_head list;
209
struct request * rq;
210
struct completion *waiting;
211
int retry_count;
212
void * scsi_cmd;
213
char pad[PADSIZE];
214
} CommandList_struct;
215
216
/* Configuration Table Structure */
217
typedef struct _HostWrite_struct {
218
DWORD TransportRequest;
219
DWORD Reserved;
220
DWORD CoalIntDelay;
221
DWORD CoalIntCount;
222
} HostWrite_struct;
223
224
typedef struct _CfgTable_struct {
225
BYTE Signature[4];
226
DWORD SpecValence;
227
#define SIMPLE_MODE 0x02
228
#define PERFORMANT_MODE 0x04
229
#define MEMQ_MODE 0x08
230
DWORD TransportSupport;
231
DWORD TransportActive;
232
HostWrite_struct HostWrite;
233
DWORD CmdsOutMax;
234
DWORD BusTypes;
235
DWORD TransMethodOffset;
236
BYTE ServerName[16];
237
DWORD HeartBeat;
238
DWORD SCSI_Prefetch;
239
DWORD MaxSGElements;
240
DWORD MaxLogicalUnits;
241
DWORD MaxPhysicalDrives;
242
DWORD MaxPhysicalDrivesPerLogicalUnit;
243
DWORD MaxPerformantModeCommands;
244
u8 reserved[0x78 - 0x58];
245
u32 misc_fw_support; /* offset 0x78 */
246
#define MISC_FW_DOORBELL_RESET (0x02)
247
#define MISC_FW_DOORBELL_RESET2 (0x10)
248
u8 driver_version[32];
249
} CfgTable_struct;
250
251
struct TransTable_struct {
252
u32 BlockFetch0;
253
u32 BlockFetch1;
254
u32 BlockFetch2;
255
u32 BlockFetch3;
256
u32 BlockFetch4;
257
u32 BlockFetch5;
258
u32 BlockFetch6;
259
u32 BlockFetch7;
260
u32 RepQSize;
261
u32 RepQCount;
262
u32 RepQCtrAddrLow32;
263
u32 RepQCtrAddrHigh32;
264
u32 RepQAddr0Low32;
265
u32 RepQAddr0High32;
266
};
267
268
#pragma pack()
269
#endif /* CCISS_CMD_H */
270
271