Book a Demo!
CoCalc Logo Icon
StoreFeaturesDocsShareSupportNewsAboutPoliciesSign UpSign In
awilliam
GitHub Repository: awilliam/linux-vfio
Path: blob/master/drivers/i2c/busses/i2c-eg20t.c
15111 views
1
/*
2
* Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD.
3
*
4
* This program is free software; you can redistribute it and/or modify
5
* it under the terms of the GNU General Public License as published by
6
* the Free Software Foundation; version 2 of the License.
7
*
8
* This program is distributed in the hope that it will be useful,
9
* but WITHOUT ANY WARRANTY; without even the implied warranty of
10
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
11
* GNU General Public License for more details.
12
*
13
* You should have received a copy of the GNU General Public License
14
* along with this program; if not, write to the Free Software
15
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
16
*/
17
18
#include <linux/module.h>
19
#include <linux/kernel.h>
20
#include <linux/delay.h>
21
#include <linux/init.h>
22
#include <linux/errno.h>
23
#include <linux/i2c.h>
24
#include <linux/fs.h>
25
#include <linux/io.h>
26
#include <linux/types.h>
27
#include <linux/interrupt.h>
28
#include <linux/jiffies.h>
29
#include <linux/pci.h>
30
#include <linux/mutex.h>
31
#include <linux/ktime.h>
32
#include <linux/slab.h>
33
34
#define PCH_EVENT_SET 0 /* I2C Interrupt Event Set Status */
35
#define PCH_EVENT_NONE 1 /* I2C Interrupt Event Clear Status */
36
#define PCH_MAX_CLK 100000 /* Maximum Clock speed in MHz */
37
#define PCH_BUFFER_MODE_ENABLE 0x0002 /* flag for Buffer mode enable */
38
#define PCH_EEPROM_SW_RST_MODE_ENABLE 0x0008 /* EEPROM SW RST enable flag */
39
40
#define PCH_I2CSADR 0x00 /* I2C slave address register */
41
#define PCH_I2CCTL 0x04 /* I2C control register */
42
#define PCH_I2CSR 0x08 /* I2C status register */
43
#define PCH_I2CDR 0x0C /* I2C data register */
44
#define PCH_I2CMON 0x10 /* I2C bus monitor register */
45
#define PCH_I2CBC 0x14 /* I2C bus transfer rate setup counter */
46
#define PCH_I2CMOD 0x18 /* I2C mode register */
47
#define PCH_I2CBUFSLV 0x1C /* I2C buffer mode slave address register */
48
#define PCH_I2CBUFSUB 0x20 /* I2C buffer mode subaddress register */
49
#define PCH_I2CBUFFOR 0x24 /* I2C buffer mode format register */
50
#define PCH_I2CBUFCTL 0x28 /* I2C buffer mode control register */
51
#define PCH_I2CBUFMSK 0x2C /* I2C buffer mode interrupt mask register */
52
#define PCH_I2CBUFSTA 0x30 /* I2C buffer mode status register */
53
#define PCH_I2CBUFLEV 0x34 /* I2C buffer mode level register */
54
#define PCH_I2CESRFOR 0x38 /* EEPROM software reset mode format register */
55
#define PCH_I2CESRCTL 0x3C /* EEPROM software reset mode ctrl register */
56
#define PCH_I2CESRMSK 0x40 /* EEPROM software reset mode */
57
#define PCH_I2CESRSTA 0x44 /* EEPROM software reset mode status register */
58
#define PCH_I2CTMR 0x48 /* I2C timer register */
59
#define PCH_I2CSRST 0xFC /* I2C reset register */
60
#define PCH_I2CNF 0xF8 /* I2C noise filter register */
61
62
#define BUS_IDLE_TIMEOUT 20
63
#define PCH_I2CCTL_I2CMEN 0x0080
64
#define TEN_BIT_ADDR_DEFAULT 0xF000
65
#define TEN_BIT_ADDR_MASK 0xF0
66
#define PCH_START 0x0020
67
#define PCH_ESR_START 0x0001
68
#define PCH_BUFF_START 0x1
69
#define PCH_REPSTART 0x0004
70
#define PCH_ACK 0x0008
71
#define PCH_GETACK 0x0001
72
#define CLR_REG 0x0
73
#define I2C_RD 0x1
74
#define I2CMCF_BIT 0x0080
75
#define I2CMIF_BIT 0x0002
76
#define I2CMAL_BIT 0x0010
77
#define I2CBMFI_BIT 0x0001
78
#define I2CBMAL_BIT 0x0002
79
#define I2CBMNA_BIT 0x0004
80
#define I2CBMTO_BIT 0x0008
81
#define I2CBMIS_BIT 0x0010
82
#define I2CESRFI_BIT 0X0001
83
#define I2CESRTO_BIT 0x0002
84
#define I2CESRFIIE_BIT 0x1
85
#define I2CESRTOIE_BIT 0x2
86
#define I2CBMDZ_BIT 0x0040
87
#define I2CBMAG_BIT 0x0020
88
#define I2CMBB_BIT 0x0020
89
#define BUFFER_MODE_MASK (I2CBMFI_BIT | I2CBMAL_BIT | I2CBMNA_BIT | \
90
I2CBMTO_BIT | I2CBMIS_BIT)
91
#define I2C_ADDR_MSK 0xFF
92
#define I2C_MSB_2B_MSK 0x300
93
#define FAST_MODE_CLK 400
94
#define FAST_MODE_EN 0x0001
95
#define SUB_ADDR_LEN_MAX 4
96
#define BUF_LEN_MAX 32
97
#define PCH_BUFFER_MODE 0x1
98
#define EEPROM_SW_RST_MODE 0x0002
99
#define NORMAL_INTR_ENBL 0x0300
100
#define EEPROM_RST_INTR_ENBL (I2CESRFIIE_BIT | I2CESRTOIE_BIT)
101
#define EEPROM_RST_INTR_DISBL 0x0
102
#define BUFFER_MODE_INTR_ENBL 0x001F
103
#define BUFFER_MODE_INTR_DISBL 0x0
104
#define NORMAL_MODE 0x0
105
#define BUFFER_MODE 0x1
106
#define EEPROM_SR_MODE 0x2
107
#define I2C_TX_MODE 0x0010
108
#define PCH_BUF_TX 0xFFF7
109
#define PCH_BUF_RD 0x0008
110
#define I2C_ERROR_MASK (I2CESRTO_EVENT | I2CBMIS_EVENT | I2CBMTO_EVENT | \
111
I2CBMNA_EVENT | I2CBMAL_EVENT | I2CMAL_EVENT)
112
#define I2CMAL_EVENT 0x0001
113
#define I2CMCF_EVENT 0x0002
114
#define I2CBMFI_EVENT 0x0004
115
#define I2CBMAL_EVENT 0x0008
116
#define I2CBMNA_EVENT 0x0010
117
#define I2CBMTO_EVENT 0x0020
118
#define I2CBMIS_EVENT 0x0040
119
#define I2CESRFI_EVENT 0x0080
120
#define I2CESRTO_EVENT 0x0100
121
#define PCI_DEVICE_ID_PCH_I2C 0x8817
122
123
#define pch_dbg(adap, fmt, arg...) \
124
dev_dbg(adap->pch_adapter.dev.parent, "%s :" fmt, __func__, ##arg)
125
126
#define pch_err(adap, fmt, arg...) \
127
dev_err(adap->pch_adapter.dev.parent, "%s :" fmt, __func__, ##arg)
128
129
#define pch_pci_err(pdev, fmt, arg...) \
130
dev_err(&pdev->dev, "%s :" fmt, __func__, ##arg)
131
132
#define pch_pci_dbg(pdev, fmt, arg...) \
133
dev_dbg(&pdev->dev, "%s :" fmt, __func__, ##arg)
134
135
/*
136
Set the number of I2C instance max
137
Intel EG20T PCH : 1ch
138
OKI SEMICONDUCTOR ML7213 IOH : 2ch
139
*/
140
#define PCH_I2C_MAX_DEV 2
141
142
/**
143
* struct i2c_algo_pch_data - for I2C driver functionalities
144
* @pch_adapter: stores the reference to i2c_adapter structure
145
* @p_adapter_info: stores the reference to adapter_info structure
146
* @pch_base_address: specifies the remapped base address
147
* @pch_buff_mode_en: specifies if buffer mode is enabled
148
* @pch_event_flag: specifies occurrence of interrupt events
149
* @pch_i2c_xfer_in_progress: specifies whether the transfer is completed
150
*/
151
struct i2c_algo_pch_data {
152
struct i2c_adapter pch_adapter;
153
struct adapter_info *p_adapter_info;
154
void __iomem *pch_base_address;
155
int pch_buff_mode_en;
156
u32 pch_event_flag;
157
bool pch_i2c_xfer_in_progress;
158
};
159
160
/**
161
* struct adapter_info - This structure holds the adapter information for the
162
PCH i2c controller
163
* @pch_data: stores a list of i2c_algo_pch_data
164
* @pch_i2c_suspended: specifies whether the system is suspended or not
165
* perhaps with more lines and words.
166
* @ch_num: specifies the number of i2c instance
167
*
168
* pch_data has as many elements as maximum I2C channels
169
*/
170
struct adapter_info {
171
struct i2c_algo_pch_data pch_data[PCH_I2C_MAX_DEV];
172
bool pch_i2c_suspended;
173
int ch_num;
174
};
175
176
177
static int pch_i2c_speed = 100; /* I2C bus speed in Kbps */
178
static int pch_clk = 50000; /* specifies I2C clock speed in KHz */
179
static wait_queue_head_t pch_event;
180
static DEFINE_MUTEX(pch_mutex);
181
182
/* Definition for ML7213 by OKI SEMICONDUCTOR */
183
#define PCI_VENDOR_ID_ROHM 0x10DB
184
#define PCI_DEVICE_ID_ML7213_I2C 0x802D
185
#define PCI_DEVICE_ID_ML7223_I2C 0x8010
186
187
static struct pci_device_id __devinitdata pch_pcidev_id[] = {
188
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PCH_I2C), 1, },
189
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_I2C), 2, },
190
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7223_I2C), 1, },
191
{0,}
192
};
193
194
static irqreturn_t pch_i2c_handler(int irq, void *pData);
195
196
static inline void pch_setbit(void __iomem *addr, u32 offset, u32 bitmask)
197
{
198
u32 val;
199
val = ioread32(addr + offset);
200
val |= bitmask;
201
iowrite32(val, addr + offset);
202
}
203
204
static inline void pch_clrbit(void __iomem *addr, u32 offset, u32 bitmask)
205
{
206
u32 val;
207
val = ioread32(addr + offset);
208
val &= (~bitmask);
209
iowrite32(val, addr + offset);
210
}
211
212
/**
213
* pch_i2c_init() - hardware initialization of I2C module
214
* @adap: Pointer to struct i2c_algo_pch_data.
215
*/
216
static void pch_i2c_init(struct i2c_algo_pch_data *adap)
217
{
218
void __iomem *p = adap->pch_base_address;
219
u32 pch_i2cbc;
220
u32 pch_i2ctmr;
221
u32 reg_value;
222
223
/* reset I2C controller */
224
iowrite32(0x01, p + PCH_I2CSRST);
225
msleep(20);
226
iowrite32(0x0, p + PCH_I2CSRST);
227
228
/* Initialize I2C registers */
229
iowrite32(0x21, p + PCH_I2CNF);
230
231
pch_setbit(adap->pch_base_address, PCH_I2CCTL, PCH_I2CCTL_I2CMEN);
232
233
if (pch_i2c_speed != 400)
234
pch_i2c_speed = 100;
235
236
reg_value = PCH_I2CCTL_I2CMEN;
237
if (pch_i2c_speed == FAST_MODE_CLK) {
238
reg_value |= FAST_MODE_EN;
239
pch_dbg(adap, "Fast mode enabled\n");
240
}
241
242
if (pch_clk > PCH_MAX_CLK)
243
pch_clk = 62500;
244
245
pch_i2cbc = (pch_clk + (pch_i2c_speed * 4)) / pch_i2c_speed * 8;
246
/* Set transfer speed in I2CBC */
247
iowrite32(pch_i2cbc, p + PCH_I2CBC);
248
249
pch_i2ctmr = (pch_clk) / 8;
250
iowrite32(pch_i2ctmr, p + PCH_I2CTMR);
251
252
reg_value |= NORMAL_INTR_ENBL; /* Enable interrupts in normal mode */
253
iowrite32(reg_value, p + PCH_I2CCTL);
254
255
pch_dbg(adap,
256
"I2CCTL=%x pch_i2cbc=%x pch_i2ctmr=%x Enable interrupts\n",
257
ioread32(p + PCH_I2CCTL), pch_i2cbc, pch_i2ctmr);
258
259
init_waitqueue_head(&pch_event);
260
}
261
262
static inline bool ktime_lt(const ktime_t cmp1, const ktime_t cmp2)
263
{
264
return cmp1.tv64 < cmp2.tv64;
265
}
266
267
/**
268
* pch_i2c_wait_for_bus_idle() - check the status of bus.
269
* @adap: Pointer to struct i2c_algo_pch_data.
270
* @timeout: waiting time counter (us).
271
*/
272
static s32 pch_i2c_wait_for_bus_idle(struct i2c_algo_pch_data *adap,
273
s32 timeout)
274
{
275
void __iomem *p = adap->pch_base_address;
276
277
/* MAX timeout value is timeout*1000*1000nsec */
278
ktime_t ns_val = ktime_add_ns(ktime_get(), timeout*1000*1000);
279
do {
280
if ((ioread32(p + PCH_I2CSR) & I2CMBB_BIT) == 0)
281
break;
282
msleep(20);
283
} while (ktime_lt(ktime_get(), ns_val));
284
285
pch_dbg(adap, "I2CSR = %x\n", ioread32(p + PCH_I2CSR));
286
287
if (timeout == 0) {
288
pch_err(adap, "%s: Timeout Error.return%d\n", __func__, -ETIME);
289
return -ETIME;
290
}
291
292
return 0;
293
}
294
295
/**
296
* pch_i2c_start() - Generate I2C start condition in normal mode.
297
* @adap: Pointer to struct i2c_algo_pch_data.
298
*
299
* Generate I2C start condition in normal mode by setting I2CCTL.I2CMSTA to 1.
300
*/
301
static void pch_i2c_start(struct i2c_algo_pch_data *adap)
302
{
303
void __iomem *p = adap->pch_base_address;
304
pch_dbg(adap, "I2CCTL = %x\n", ioread32(p + PCH_I2CCTL));
305
pch_setbit(adap->pch_base_address, PCH_I2CCTL, PCH_START);
306
}
307
308
/**
309
* pch_i2c_wait_for_xfer_complete() - initiates a wait for the tx complete event
310
* @adap: Pointer to struct i2c_algo_pch_data.
311
*/
312
static s32 pch_i2c_wait_for_xfer_complete(struct i2c_algo_pch_data *adap)
313
{
314
s32 ret;
315
ret = wait_event_timeout(pch_event,
316
(adap->pch_event_flag != 0), msecs_to_jiffies(50));
317
if (ret < 0) {
318
pch_err(adap, "timeout: %x\n", adap->pch_event_flag);
319
return ret;
320
}
321
322
if (ret == 0) {
323
pch_err(adap, "timeout: %x\n", adap->pch_event_flag);
324
return -ETIMEDOUT;
325
}
326
327
if (adap->pch_event_flag & I2C_ERROR_MASK) {
328
pch_err(adap, "error bits set: %x\n", adap->pch_event_flag);
329
return -EIO;
330
}
331
332
adap->pch_event_flag = 0;
333
334
return 0;
335
}
336
337
/**
338
* pch_i2c_getack() - to confirm ACK/NACK
339
* @adap: Pointer to struct i2c_algo_pch_data.
340
*/
341
static s32 pch_i2c_getack(struct i2c_algo_pch_data *adap)
342
{
343
u32 reg_val;
344
void __iomem *p = adap->pch_base_address;
345
reg_val = ioread32(p + PCH_I2CSR) & PCH_GETACK;
346
347
if (reg_val != 0) {
348
pch_err(adap, "return%d\n", -EPROTO);
349
return -EPROTO;
350
}
351
352
return 0;
353
}
354
355
/**
356
* pch_i2c_stop() - generate stop condition in normal mode.
357
* @adap: Pointer to struct i2c_algo_pch_data.
358
*/
359
static void pch_i2c_stop(struct i2c_algo_pch_data *adap)
360
{
361
void __iomem *p = adap->pch_base_address;
362
pch_dbg(adap, "I2CCTL = %x\n", ioread32(p + PCH_I2CCTL));
363
/* clear the start bit */
364
pch_clrbit(adap->pch_base_address, PCH_I2CCTL, PCH_START);
365
}
366
367
/**
368
* pch_i2c_repstart() - generate repeated start condition in normal mode
369
* @adap: Pointer to struct i2c_algo_pch_data.
370
*/
371
static void pch_i2c_repstart(struct i2c_algo_pch_data *adap)
372
{
373
void __iomem *p = adap->pch_base_address;
374
pch_dbg(adap, "I2CCTL = %x\n", ioread32(p + PCH_I2CCTL));
375
pch_setbit(adap->pch_base_address, PCH_I2CCTL, PCH_REPSTART);
376
}
377
378
/**
379
* pch_i2c_writebytes() - write data to I2C bus in normal mode
380
* @i2c_adap: Pointer to the struct i2c_adapter.
381
* @last: specifies whether last message or not.
382
* In the case of compound mode it will be 1 for last message,
383
* otherwise 0.
384
* @first: specifies whether first message or not.
385
* 1 for first message otherwise 0.
386
*/
387
static s32 pch_i2c_writebytes(struct i2c_adapter *i2c_adap,
388
struct i2c_msg *msgs, u32 last, u32 first)
389
{
390
struct i2c_algo_pch_data *adap = i2c_adap->algo_data;
391
u8 *buf;
392
u32 length;
393
u32 addr;
394
u32 addr_2_msb;
395
u32 addr_8_lsb;
396
s32 wrcount;
397
void __iomem *p = adap->pch_base_address;
398
399
length = msgs->len;
400
buf = msgs->buf;
401
addr = msgs->addr;
402
403
/* enable master tx */
404
pch_setbit(adap->pch_base_address, PCH_I2CCTL, I2C_TX_MODE);
405
406
pch_dbg(adap, "I2CCTL = %x msgs->len = %d\n", ioread32(p + PCH_I2CCTL),
407
length);
408
409
if (first) {
410
if (pch_i2c_wait_for_bus_idle(adap, BUS_IDLE_TIMEOUT) == -ETIME)
411
return -ETIME;
412
}
413
414
if (msgs->flags & I2C_M_TEN) {
415
addr_2_msb = ((addr & I2C_MSB_2B_MSK) >> 7);
416
iowrite32(addr_2_msb | TEN_BIT_ADDR_MASK, p + PCH_I2CDR);
417
if (first)
418
pch_i2c_start(adap);
419
if (pch_i2c_wait_for_xfer_complete(adap) == 0 &&
420
pch_i2c_getack(adap) == 0) {
421
addr_8_lsb = (addr & I2C_ADDR_MSK);
422
iowrite32(addr_8_lsb, p + PCH_I2CDR);
423
} else {
424
pch_i2c_stop(adap);
425
return -ETIME;
426
}
427
} else {
428
/* set 7 bit slave address and R/W bit as 0 */
429
iowrite32(addr << 1, p + PCH_I2CDR);
430
if (first)
431
pch_i2c_start(adap);
432
}
433
434
if ((pch_i2c_wait_for_xfer_complete(adap) == 0) &&
435
(pch_i2c_getack(adap) == 0)) {
436
for (wrcount = 0; wrcount < length; ++wrcount) {
437
/* write buffer value to I2C data register */
438
iowrite32(buf[wrcount], p + PCH_I2CDR);
439
pch_dbg(adap, "writing %x to Data register\n",
440
buf[wrcount]);
441
442
if (pch_i2c_wait_for_xfer_complete(adap) != 0)
443
return -ETIME;
444
445
if (pch_i2c_getack(adap))
446
return -EIO;
447
}
448
449
/* check if this is the last message */
450
if (last)
451
pch_i2c_stop(adap);
452
else
453
pch_i2c_repstart(adap);
454
} else {
455
pch_i2c_stop(adap);
456
return -EIO;
457
}
458
459
pch_dbg(adap, "return=%d\n", wrcount);
460
461
return wrcount;
462
}
463
464
/**
465
* pch_i2c_sendack() - send ACK
466
* @adap: Pointer to struct i2c_algo_pch_data.
467
*/
468
static void pch_i2c_sendack(struct i2c_algo_pch_data *adap)
469
{
470
void __iomem *p = adap->pch_base_address;
471
pch_dbg(adap, "I2CCTL = %x\n", ioread32(p + PCH_I2CCTL));
472
pch_clrbit(adap->pch_base_address, PCH_I2CCTL, PCH_ACK);
473
}
474
475
/**
476
* pch_i2c_sendnack() - send NACK
477
* @adap: Pointer to struct i2c_algo_pch_data.
478
*/
479
static void pch_i2c_sendnack(struct i2c_algo_pch_data *adap)
480
{
481
void __iomem *p = adap->pch_base_address;
482
pch_dbg(adap, "I2CCTL = %x\n", ioread32(p + PCH_I2CCTL));
483
pch_setbit(adap->pch_base_address, PCH_I2CCTL, PCH_ACK);
484
}
485
486
/**
487
* pch_i2c_readbytes() - read data from I2C bus in normal mode.
488
* @i2c_adap: Pointer to the struct i2c_adapter.
489
* @msgs: Pointer to i2c_msg structure.
490
* @last: specifies whether last message or not.
491
* @first: specifies whether first message or not.
492
*/
493
static s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs,
494
u32 last, u32 first)
495
{
496
struct i2c_algo_pch_data *adap = i2c_adap->algo_data;
497
498
u8 *buf;
499
u32 count;
500
u32 length;
501
u32 addr;
502
u32 addr_2_msb;
503
void __iomem *p = adap->pch_base_address;
504
505
length = msgs->len;
506
buf = msgs->buf;
507
addr = msgs->addr;
508
509
/* enable master reception */
510
pch_clrbit(adap->pch_base_address, PCH_I2CCTL, I2C_TX_MODE);
511
512
if (first) {
513
if (pch_i2c_wait_for_bus_idle(adap, BUS_IDLE_TIMEOUT) == -ETIME)
514
return -ETIME;
515
}
516
517
if (msgs->flags & I2C_M_TEN) {
518
addr_2_msb = (((addr & I2C_MSB_2B_MSK) >> 7) | (I2C_RD));
519
iowrite32(addr_2_msb | TEN_BIT_ADDR_MASK, p + PCH_I2CDR);
520
521
} else {
522
/* 7 address bits + R/W bit */
523
addr = (((addr) << 1) | (I2C_RD));
524
iowrite32(addr, p + PCH_I2CDR);
525
}
526
527
/* check if it is the first message */
528
if (first)
529
pch_i2c_start(adap);
530
531
if ((pch_i2c_wait_for_xfer_complete(adap) == 0) &&
532
(pch_i2c_getack(adap) == 0)) {
533
pch_dbg(adap, "return %d\n", 0);
534
535
if (length == 0) {
536
pch_i2c_stop(adap);
537
ioread32(p + PCH_I2CDR); /* Dummy read needs */
538
539
count = length;
540
} else {
541
int read_index;
542
int loop;
543
pch_i2c_sendack(adap);
544
545
/* Dummy read */
546
for (loop = 1, read_index = 0; loop < length; loop++) {
547
buf[read_index] = ioread32(p + PCH_I2CDR);
548
549
if (loop != 1)
550
read_index++;
551
552
if (pch_i2c_wait_for_xfer_complete(adap) != 0) {
553
pch_i2c_stop(adap);
554
return -ETIME;
555
}
556
} /* end for */
557
558
pch_i2c_sendnack(adap);
559
560
buf[read_index] = ioread32(p + PCH_I2CDR);
561
562
if (length != 1)
563
read_index++;
564
565
if (pch_i2c_wait_for_xfer_complete(adap) == 0) {
566
if (last)
567
pch_i2c_stop(adap);
568
else
569
pch_i2c_repstart(adap);
570
571
buf[read_index++] = ioread32(p + PCH_I2CDR);
572
count = read_index;
573
} else {
574
count = -ETIME;
575
}
576
577
}
578
} else {
579
count = -ETIME;
580
pch_i2c_stop(adap);
581
}
582
583
return count;
584
}
585
586
/**
587
* pch_i2c_cb() - Interrupt handler Call back function
588
* @adap: Pointer to struct i2c_algo_pch_data.
589
*/
590
static void pch_i2c_cb(struct i2c_algo_pch_data *adap)
591
{
592
u32 sts;
593
void __iomem *p = adap->pch_base_address;
594
595
sts = ioread32(p + PCH_I2CSR);
596
sts &= (I2CMAL_BIT | I2CMCF_BIT | I2CMIF_BIT);
597
if (sts & I2CMAL_BIT)
598
adap->pch_event_flag |= I2CMAL_EVENT;
599
600
if (sts & I2CMCF_BIT)
601
adap->pch_event_flag |= I2CMCF_EVENT;
602
603
/* clear the applicable bits */
604
pch_clrbit(adap->pch_base_address, PCH_I2CSR, sts);
605
606
pch_dbg(adap, "PCH_I2CSR = %x\n", ioread32(p + PCH_I2CSR));
607
608
wake_up(&pch_event);
609
}
610
611
/**
612
* pch_i2c_handler() - interrupt handler for the PCH I2C controller
613
* @irq: irq number.
614
* @pData: cookie passed back to the handler function.
615
*/
616
static irqreturn_t pch_i2c_handler(int irq, void *pData)
617
{
618
u32 reg_val;
619
int flag;
620
int i;
621
struct adapter_info *adap_info = pData;
622
void __iomem *p;
623
u32 mode;
624
625
for (i = 0, flag = 0; i < adap_info->ch_num; i++) {
626
p = adap_info->pch_data[i].pch_base_address;
627
mode = ioread32(p + PCH_I2CMOD);
628
mode &= BUFFER_MODE | EEPROM_SR_MODE;
629
if (mode != NORMAL_MODE) {
630
pch_err(adap_info->pch_data,
631
"I2C-%d mode(%d) is not supported\n", mode, i);
632
continue;
633
}
634
reg_val = ioread32(p + PCH_I2CSR);
635
if (reg_val & (I2CMAL_BIT | I2CMCF_BIT | I2CMIF_BIT)) {
636
pch_i2c_cb(&adap_info->pch_data[i]);
637
flag = 1;
638
}
639
}
640
641
return flag ? IRQ_HANDLED : IRQ_NONE;
642
}
643
644
/**
645
* pch_i2c_xfer() - Reading adnd writing data through I2C bus
646
* @i2c_adap: Pointer to the struct i2c_adapter.
647
* @msgs: Pointer to i2c_msg structure.
648
* @num: number of messages.
649
*/
650
static s32 pch_i2c_xfer(struct i2c_adapter *i2c_adap,
651
struct i2c_msg *msgs, s32 num)
652
{
653
struct i2c_msg *pmsg;
654
u32 i = 0;
655
u32 status;
656
u32 msglen;
657
u32 subaddrlen;
658
s32 ret;
659
660
struct i2c_algo_pch_data *adap = i2c_adap->algo_data;
661
662
ret = mutex_lock_interruptible(&pch_mutex);
663
if (ret)
664
return -ERESTARTSYS;
665
666
if (adap->p_adapter_info->pch_i2c_suspended) {
667
mutex_unlock(&pch_mutex);
668
return -EBUSY;
669
}
670
671
pch_dbg(adap, "adap->p_adapter_info->pch_i2c_suspended is %d\n",
672
adap->p_adapter_info->pch_i2c_suspended);
673
/* transfer not completed */
674
adap->pch_i2c_xfer_in_progress = true;
675
676
pmsg = &msgs[0];
677
pmsg->flags |= adap->pch_buff_mode_en;
678
status = pmsg->flags;
679
pch_dbg(adap,
680
"After invoking I2C_MODE_SEL :flag= 0x%x\n", status);
681
/* calculate sub address length and message length */
682
/* these are applicable only for buffer mode */
683
subaddrlen = pmsg->buf[0];
684
/* calculate actual message length excluding
685
* the sub address fields */
686
msglen = (pmsg->len) - (subaddrlen + 1);
687
if (status & (I2C_M_RD)) {
688
pch_dbg(adap, "invoking pch_i2c_readbytes\n");
689
ret = pch_i2c_readbytes(i2c_adap, pmsg, (i + 1 == num),
690
(i == 0));
691
} else {
692
pch_dbg(adap, "invoking pch_i2c_writebytes\n");
693
ret = pch_i2c_writebytes(i2c_adap, pmsg, (i + 1 == num),
694
(i == 0));
695
}
696
697
adap->pch_i2c_xfer_in_progress = false; /* transfer completed */
698
699
mutex_unlock(&pch_mutex);
700
701
return ret;
702
}
703
704
/**
705
* pch_i2c_func() - return the functionality of the I2C driver
706
* @adap: Pointer to struct i2c_algo_pch_data.
707
*/
708
static u32 pch_i2c_func(struct i2c_adapter *adap)
709
{
710
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR;
711
}
712
713
static struct i2c_algorithm pch_algorithm = {
714
.master_xfer = pch_i2c_xfer,
715
.functionality = pch_i2c_func
716
};
717
718
/**
719
* pch_i2c_disbl_int() - Disable PCH I2C interrupts
720
* @adap: Pointer to struct i2c_algo_pch_data.
721
*/
722
static void pch_i2c_disbl_int(struct i2c_algo_pch_data *adap)
723
{
724
void __iomem *p = adap->pch_base_address;
725
726
pch_clrbit(adap->pch_base_address, PCH_I2CCTL, NORMAL_INTR_ENBL);
727
728
iowrite32(EEPROM_RST_INTR_DISBL, p + PCH_I2CESRMSK);
729
730
iowrite32(BUFFER_MODE_INTR_DISBL, p + PCH_I2CBUFMSK);
731
}
732
733
static int __devinit pch_i2c_probe(struct pci_dev *pdev,
734
const struct pci_device_id *id)
735
{
736
void __iomem *base_addr;
737
int ret;
738
int i, j;
739
struct adapter_info *adap_info;
740
struct i2c_adapter *pch_adap;
741
742
pch_pci_dbg(pdev, "Entered.\n");
743
744
adap_info = kzalloc((sizeof(struct adapter_info)), GFP_KERNEL);
745
if (adap_info == NULL) {
746
pch_pci_err(pdev, "Memory allocation FAILED\n");
747
return -ENOMEM;
748
}
749
750
ret = pci_enable_device(pdev);
751
if (ret) {
752
pch_pci_err(pdev, "pci_enable_device FAILED\n");
753
goto err_pci_enable;
754
}
755
756
ret = pci_request_regions(pdev, KBUILD_MODNAME);
757
if (ret) {
758
pch_pci_err(pdev, "pci_request_regions FAILED\n");
759
goto err_pci_req;
760
}
761
762
base_addr = pci_iomap(pdev, 1, 0);
763
764
if (base_addr == NULL) {
765
pch_pci_err(pdev, "pci_iomap FAILED\n");
766
ret = -ENOMEM;
767
goto err_pci_iomap;
768
}
769
770
/* Set the number of I2C channel instance */
771
adap_info->ch_num = id->driver_data;
772
773
for (i = 0; i < adap_info->ch_num; i++) {
774
pch_adap = &adap_info->pch_data[i].pch_adapter;
775
adap_info->pch_i2c_suspended = false;
776
777
adap_info->pch_data[i].p_adapter_info = adap_info;
778
779
pch_adap->owner = THIS_MODULE;
780
pch_adap->class = I2C_CLASS_HWMON;
781
strcpy(pch_adap->name, KBUILD_MODNAME);
782
pch_adap->algo = &pch_algorithm;
783
pch_adap->algo_data = &adap_info->pch_data[i];
784
785
/* base_addr + offset; */
786
adap_info->pch_data[i].pch_base_address = base_addr + 0x100 * i;
787
788
pch_adap->dev.parent = &pdev->dev;
789
790
ret = i2c_add_adapter(pch_adap);
791
if (ret) {
792
pch_pci_err(pdev, "i2c_add_adapter[ch:%d] FAILED\n", i);
793
goto err_i2c_add_adapter;
794
}
795
796
pch_i2c_init(&adap_info->pch_data[i]);
797
}
798
ret = request_irq(pdev->irq, pch_i2c_handler, IRQF_SHARED,
799
KBUILD_MODNAME, adap_info);
800
if (ret) {
801
pch_pci_err(pdev, "request_irq FAILED\n");
802
goto err_i2c_add_adapter;
803
}
804
805
pci_set_drvdata(pdev, adap_info);
806
pch_pci_dbg(pdev, "returns %d.\n", ret);
807
return 0;
808
809
err_i2c_add_adapter:
810
for (j = 0; j < i; j++)
811
i2c_del_adapter(&adap_info->pch_data[j].pch_adapter);
812
pci_iounmap(pdev, base_addr);
813
err_pci_iomap:
814
pci_release_regions(pdev);
815
err_pci_req:
816
pci_disable_device(pdev);
817
err_pci_enable:
818
kfree(adap_info);
819
return ret;
820
}
821
822
static void __devexit pch_i2c_remove(struct pci_dev *pdev)
823
{
824
int i;
825
struct adapter_info *adap_info = pci_get_drvdata(pdev);
826
827
free_irq(pdev->irq, adap_info);
828
829
for (i = 0; i < adap_info->ch_num; i++) {
830
pch_i2c_disbl_int(&adap_info->pch_data[i]);
831
i2c_del_adapter(&adap_info->pch_data[i].pch_adapter);
832
}
833
834
if (adap_info->pch_data[0].pch_base_address)
835
pci_iounmap(pdev, adap_info->pch_data[0].pch_base_address);
836
837
for (i = 0; i < adap_info->ch_num; i++)
838
adap_info->pch_data[i].pch_base_address = 0;
839
840
pci_set_drvdata(pdev, NULL);
841
842
pci_release_regions(pdev);
843
844
pci_disable_device(pdev);
845
kfree(adap_info);
846
}
847
848
#ifdef CONFIG_PM
849
static int pch_i2c_suspend(struct pci_dev *pdev, pm_message_t state)
850
{
851
int ret;
852
int i;
853
struct adapter_info *adap_info = pci_get_drvdata(pdev);
854
void __iomem *p = adap_info->pch_data[0].pch_base_address;
855
856
adap_info->pch_i2c_suspended = true;
857
858
for (i = 0; i < adap_info->ch_num; i++) {
859
while ((adap_info->pch_data[i].pch_i2c_xfer_in_progress)) {
860
/* Wait until all channel transfers are completed */
861
msleep(20);
862
}
863
}
864
865
/* Disable the i2c interrupts */
866
for (i = 0; i < adap_info->ch_num; i++)
867
pch_i2c_disbl_int(&adap_info->pch_data[i]);
868
869
pch_pci_dbg(pdev, "I2CSR = %x I2CBUFSTA = %x I2CESRSTA = %x "
870
"invoked function pch_i2c_disbl_int successfully\n",
871
ioread32(p + PCH_I2CSR), ioread32(p + PCH_I2CBUFSTA),
872
ioread32(p + PCH_I2CESRSTA));
873
874
ret = pci_save_state(pdev);
875
876
if (ret) {
877
pch_pci_err(pdev, "pci_save_state\n");
878
return ret;
879
}
880
881
pci_enable_wake(pdev, PCI_D3hot, 0);
882
pci_disable_device(pdev);
883
pci_set_power_state(pdev, pci_choose_state(pdev, state));
884
885
return 0;
886
}
887
888
static int pch_i2c_resume(struct pci_dev *pdev)
889
{
890
int i;
891
struct adapter_info *adap_info = pci_get_drvdata(pdev);
892
893
pci_set_power_state(pdev, PCI_D0);
894
pci_restore_state(pdev);
895
896
if (pci_enable_device(pdev) < 0) {
897
pch_pci_err(pdev, "pch_i2c_resume:pci_enable_device FAILED\n");
898
return -EIO;
899
}
900
901
pci_enable_wake(pdev, PCI_D3hot, 0);
902
903
for (i = 0; i < adap_info->ch_num; i++)
904
pch_i2c_init(&adap_info->pch_data[i]);
905
906
adap_info->pch_i2c_suspended = false;
907
908
return 0;
909
}
910
#else
911
#define pch_i2c_suspend NULL
912
#define pch_i2c_resume NULL
913
#endif
914
915
static struct pci_driver pch_pcidriver = {
916
.name = KBUILD_MODNAME,
917
.id_table = pch_pcidev_id,
918
.probe = pch_i2c_probe,
919
.remove = __devexit_p(pch_i2c_remove),
920
.suspend = pch_i2c_suspend,
921
.resume = pch_i2c_resume
922
};
923
924
static int __init pch_pci_init(void)
925
{
926
return pci_register_driver(&pch_pcidriver);
927
}
928
module_init(pch_pci_init);
929
930
static void __exit pch_pci_exit(void)
931
{
932
pci_unregister_driver(&pch_pcidriver);
933
}
934
module_exit(pch_pci_exit);
935
936
MODULE_DESCRIPTION("Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH I2C Driver");
937
MODULE_LICENSE("GPL");
938
MODULE_AUTHOR("Tomoya MORINAGA. <[email protected]>");
939
module_param(pch_i2c_speed, int, (S_IRUSR | S_IWUSR));
940
module_param(pch_clk, int, (S_IRUSR | S_IWUSR));
941
942