Book a Demo!
CoCalc Logo Icon
StoreFeaturesDocsShareSupportNewsAboutPoliciesSign UpSign In
awilliam
GitHub Repository: awilliam/linux-vfio
Path: blob/master/include/acpi/actbl.h
10817 views
1
/******************************************************************************
2
*
3
* Name: actbl.h - Basic ACPI Table Definitions
4
*
5
*****************************************************************************/
6
7
/*
8
* Copyright (C) 2000 - 2011, Intel Corp.
9
* All rights reserved.
10
*
11
* Redistribution and use in source and binary forms, with or without
12
* modification, are permitted provided that the following conditions
13
* are met:
14
* 1. Redistributions of source code must retain the above copyright
15
* notice, this list of conditions, and the following disclaimer,
16
* without modification.
17
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
18
* substantially similar to the "NO WARRANTY" disclaimer below
19
* ("Disclaimer") and any redistribution must be conditioned upon
20
* including a substantially similar Disclaimer requirement for further
21
* binary redistribution.
22
* 3. Neither the names of the above-listed copyright holders nor the names
23
* of any contributors may be used to endorse or promote products derived
24
* from this software without specific prior written permission.
25
*
26
* Alternatively, this software may be distributed under the terms of the
27
* GNU General Public License ("GPL") version 2 as published by the Free
28
* Software Foundation.
29
*
30
* NO WARRANTY
31
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41
* POSSIBILITY OF SUCH DAMAGES.
42
*/
43
44
#ifndef __ACTBL_H__
45
#define __ACTBL_H__
46
47
/*******************************************************************************
48
*
49
* Fundamental ACPI tables
50
*
51
* This file contains definitions for the ACPI tables that are directly consumed
52
* by ACPICA. All other tables are consumed by the OS-dependent ACPI-related
53
* device drivers and other OS support code.
54
*
55
* The RSDP and FACS do not use the common ACPI table header. All other ACPI
56
* tables use the header.
57
*
58
******************************************************************************/
59
60
/*
61
* Values for description table header signatures for tables defined in this
62
* file. Useful because they make it more difficult to inadvertently type in
63
* the wrong signature.
64
*/
65
#define ACPI_SIG_DSDT "DSDT" /* Differentiated System Description Table */
66
#define ACPI_SIG_FADT "FACP" /* Fixed ACPI Description Table */
67
#define ACPI_SIG_FACS "FACS" /* Firmware ACPI Control Structure */
68
#define ACPI_SIG_PSDT "PSDT" /* Persistent System Description Table */
69
#define ACPI_SIG_RSDP "RSD PTR " /* Root System Description Pointer */
70
#define ACPI_SIG_RSDT "RSDT" /* Root System Description Table */
71
#define ACPI_SIG_XSDT "XSDT" /* Extended System Description Table */
72
#define ACPI_SIG_SSDT "SSDT" /* Secondary System Description Table */
73
#define ACPI_RSDP_NAME "RSDP" /* Short name for RSDP, not signature */
74
75
/*
76
* All tables and structures must be byte-packed to match the ACPI
77
* specification, since the tables are provided by the system BIOS
78
*/
79
#pragma pack(1)
80
81
/*
82
* Note about bitfields: The u8 type is used for bitfields in ACPI tables.
83
* This is the only type that is even remotely portable. Anything else is not
84
* portable, so do not use any other bitfield types.
85
*/
86
87
/*******************************************************************************
88
*
89
* Master ACPI Table Header. This common header is used by all ACPI tables
90
* except the RSDP and FACS.
91
*
92
******************************************************************************/
93
94
struct acpi_table_header {
95
char signature[ACPI_NAME_SIZE]; /* ASCII table signature */
96
u32 length; /* Length of table in bytes, including this header */
97
u8 revision; /* ACPI Specification minor version # */
98
u8 checksum; /* To make sum of entire table == 0 */
99
char oem_id[ACPI_OEM_ID_SIZE]; /* ASCII OEM identification */
100
char oem_table_id[ACPI_OEM_TABLE_ID_SIZE]; /* ASCII OEM table identification */
101
u32 oem_revision; /* OEM revision number */
102
char asl_compiler_id[ACPI_NAME_SIZE]; /* ASCII ASL compiler vendor ID */
103
u32 asl_compiler_revision; /* ASL compiler version */
104
};
105
106
/*******************************************************************************
107
*
108
* GAS - Generic Address Structure (ACPI 2.0+)
109
*
110
* Note: Since this structure is used in the ACPI tables, it is byte aligned.
111
* If misaliged access is not supported by the hardware, accesses to the
112
* 64-bit Address field must be performed with care.
113
*
114
******************************************************************************/
115
116
struct acpi_generic_address {
117
u8 space_id; /* Address space where struct or register exists */
118
u8 bit_width; /* Size in bits of given register */
119
u8 bit_offset; /* Bit offset within the register */
120
u8 access_width; /* Minimum Access size (ACPI 3.0) */
121
u64 address; /* 64-bit address of struct or register */
122
};
123
124
/*******************************************************************************
125
*
126
* RSDP - Root System Description Pointer (Signature is "RSD PTR ")
127
* Version 2
128
*
129
******************************************************************************/
130
131
struct acpi_table_rsdp {
132
char signature[8]; /* ACPI signature, contains "RSD PTR " */
133
u8 checksum; /* ACPI 1.0 checksum */
134
char oem_id[ACPI_OEM_ID_SIZE]; /* OEM identification */
135
u8 revision; /* Must be (0) for ACPI 1.0 or (2) for ACPI 2.0+ */
136
u32 rsdt_physical_address; /* 32-bit physical address of the RSDT */
137
u32 length; /* Table length in bytes, including header (ACPI 2.0+) */
138
u64 xsdt_physical_address; /* 64-bit physical address of the XSDT (ACPI 2.0+) */
139
u8 extended_checksum; /* Checksum of entire table (ACPI 2.0+) */
140
u8 reserved[3]; /* Reserved, must be zero */
141
};
142
143
#define ACPI_RSDP_REV0_SIZE 20 /* Size of original ACPI 1.0 RSDP */
144
145
/*******************************************************************************
146
*
147
* RSDT/XSDT - Root System Description Tables
148
* Version 1 (both)
149
*
150
******************************************************************************/
151
152
struct acpi_table_rsdt {
153
struct acpi_table_header header; /* Common ACPI table header */
154
u32 table_offset_entry[1]; /* Array of pointers to ACPI tables */
155
};
156
157
struct acpi_table_xsdt {
158
struct acpi_table_header header; /* Common ACPI table header */
159
u64 table_offset_entry[1]; /* Array of pointers to ACPI tables */
160
};
161
162
/*******************************************************************************
163
*
164
* FACS - Firmware ACPI Control Structure (FACS)
165
*
166
******************************************************************************/
167
168
struct acpi_table_facs {
169
char signature[4]; /* ASCII table signature */
170
u32 length; /* Length of structure, in bytes */
171
u32 hardware_signature; /* Hardware configuration signature */
172
u32 firmware_waking_vector; /* 32-bit physical address of the Firmware Waking Vector */
173
u32 global_lock; /* Global Lock for shared hardware resources */
174
u32 flags;
175
u64 xfirmware_waking_vector; /* 64-bit version of the Firmware Waking Vector (ACPI 2.0+) */
176
u8 version; /* Version of this table (ACPI 2.0+) */
177
u8 reserved[3]; /* Reserved, must be zero */
178
u32 ospm_flags; /* Flags to be set by OSPM (ACPI 4.0) */
179
u8 reserved1[24]; /* Reserved, must be zero */
180
};
181
182
/* Masks for global_lock flag field above */
183
184
#define ACPI_GLOCK_PENDING (1) /* 00: Pending global lock ownership */
185
#define ACPI_GLOCK_OWNED (1<<1) /* 01: Global lock is owned */
186
187
/* Masks for Flags field above */
188
189
#define ACPI_FACS_S4_BIOS_PRESENT (1) /* 00: S4BIOS support is present */
190
#define ACPI_FACS_64BIT_WAKE (1<<1) /* 01: 64-bit wake vector supported (ACPI 4.0) */
191
192
/* Masks for ospm_flags field above */
193
194
#define ACPI_FACS_64BIT_ENVIRONMENT (1) /* 00: 64-bit wake environment is required (ACPI 4.0) */
195
196
/*******************************************************************************
197
*
198
* FADT - Fixed ACPI Description Table (Signature "FACP")
199
* Version 4
200
*
201
******************************************************************************/
202
203
/* Fields common to all versions of the FADT */
204
205
struct acpi_table_fadt {
206
struct acpi_table_header header; /* Common ACPI table header */
207
u32 facs; /* 32-bit physical address of FACS */
208
u32 dsdt; /* 32-bit physical address of DSDT */
209
u8 model; /* System Interrupt Model (ACPI 1.0) - not used in ACPI 2.0+ */
210
u8 preferred_profile; /* Conveys preferred power management profile to OSPM. */
211
u16 sci_interrupt; /* System vector of SCI interrupt */
212
u32 smi_command; /* 32-bit Port address of SMI command port */
213
u8 acpi_enable; /* Value to write to smi_cmd to enable ACPI */
214
u8 acpi_disable; /* Value to write to smi_cmd to disable ACPI */
215
u8 S4bios_request; /* Value to write to SMI CMD to enter S4BIOS state */
216
u8 pstate_control; /* Processor performance state control */
217
u32 pm1a_event_block; /* 32-bit Port address of Power Mgt 1a Event Reg Blk */
218
u32 pm1b_event_block; /* 32-bit Port address of Power Mgt 1b Event Reg Blk */
219
u32 pm1a_control_block; /* 32-bit Port address of Power Mgt 1a Control Reg Blk */
220
u32 pm1b_control_block; /* 32-bit Port address of Power Mgt 1b Control Reg Blk */
221
u32 pm2_control_block; /* 32-bit Port address of Power Mgt 2 Control Reg Blk */
222
u32 pm_timer_block; /* 32-bit Port address of Power Mgt Timer Ctrl Reg Blk */
223
u32 gpe0_block; /* 32-bit Port address of General Purpose Event 0 Reg Blk */
224
u32 gpe1_block; /* 32-bit Port address of General Purpose Event 1 Reg Blk */
225
u8 pm1_event_length; /* Byte Length of ports at pm1x_event_block */
226
u8 pm1_control_length; /* Byte Length of ports at pm1x_control_block */
227
u8 pm2_control_length; /* Byte Length of ports at pm2_control_block */
228
u8 pm_timer_length; /* Byte Length of ports at pm_timer_block */
229
u8 gpe0_block_length; /* Byte Length of ports at gpe0_block */
230
u8 gpe1_block_length; /* Byte Length of ports at gpe1_block */
231
u8 gpe1_base; /* Offset in GPE number space where GPE1 events start */
232
u8 cst_control; /* Support for the _CST object and C States change notification */
233
u16 C2latency; /* Worst case HW latency to enter/exit C2 state */
234
u16 C3latency; /* Worst case HW latency to enter/exit C3 state */
235
u16 flush_size; /* Processor's memory cache line width, in bytes */
236
u16 flush_stride; /* Number of flush strides that need to be read */
237
u8 duty_offset; /* Processor duty cycle index in processor's P_CNT reg */
238
u8 duty_width; /* Processor duty cycle value bit width in P_CNT register */
239
u8 day_alarm; /* Index to day-of-month alarm in RTC CMOS RAM */
240
u8 month_alarm; /* Index to month-of-year alarm in RTC CMOS RAM */
241
u8 century; /* Index to century in RTC CMOS RAM */
242
u16 boot_flags; /* IA-PC Boot Architecture Flags (see below for individual flags) */
243
u8 reserved; /* Reserved, must be zero */
244
u32 flags; /* Miscellaneous flag bits (see below for individual flags) */
245
struct acpi_generic_address reset_register; /* 64-bit address of the Reset register */
246
u8 reset_value; /* Value to write to the reset_register port to reset the system */
247
u8 reserved4[3]; /* Reserved, must be zero */
248
u64 Xfacs; /* 64-bit physical address of FACS */
249
u64 Xdsdt; /* 64-bit physical address of DSDT */
250
struct acpi_generic_address xpm1a_event_block; /* 64-bit Extended Power Mgt 1a Event Reg Blk address */
251
struct acpi_generic_address xpm1b_event_block; /* 64-bit Extended Power Mgt 1b Event Reg Blk address */
252
struct acpi_generic_address xpm1a_control_block; /* 64-bit Extended Power Mgt 1a Control Reg Blk address */
253
struct acpi_generic_address xpm1b_control_block; /* 64-bit Extended Power Mgt 1b Control Reg Blk address */
254
struct acpi_generic_address xpm2_control_block; /* 64-bit Extended Power Mgt 2 Control Reg Blk address */
255
struct acpi_generic_address xpm_timer_block; /* 64-bit Extended Power Mgt Timer Ctrl Reg Blk address */
256
struct acpi_generic_address xgpe0_block; /* 64-bit Extended General Purpose Event 0 Reg Blk address */
257
struct acpi_generic_address xgpe1_block; /* 64-bit Extended General Purpose Event 1 Reg Blk address */
258
};
259
260
/* Masks for FADT Boot Architecture Flags (boot_flags) */
261
262
#define ACPI_FADT_LEGACY_DEVICES (1) /* 00: [V2] System has LPC or ISA bus devices */
263
#define ACPI_FADT_8042 (1<<1) /* 01: [V3] System has an 8042 controller on port 60/64 */
264
#define ACPI_FADT_NO_VGA (1<<2) /* 02: [V4] It is not safe to probe for VGA hardware */
265
#define ACPI_FADT_NO_MSI (1<<3) /* 03: [V4] Message Signaled Interrupts (MSI) must not be enabled */
266
#define ACPI_FADT_NO_ASPM (1<<4) /* 04: [V4] PCIe ASPM control must not be enabled */
267
268
#define FADT2_REVISION_ID 3
269
270
/* Masks for FADT flags */
271
272
#define ACPI_FADT_WBINVD (1) /* 00: [V1] The wbinvd instruction works properly */
273
#define ACPI_FADT_WBINVD_FLUSH (1<<1) /* 01: [V1] wbinvd flushes but does not invalidate caches */
274
#define ACPI_FADT_C1_SUPPORTED (1<<2) /* 02: [V1] All processors support C1 state */
275
#define ACPI_FADT_C2_MP_SUPPORTED (1<<3) /* 03: [V1] C2 state works on MP system */
276
#define ACPI_FADT_POWER_BUTTON (1<<4) /* 04: [V1] Power button is handled as a control method device */
277
#define ACPI_FADT_SLEEP_BUTTON (1<<5) /* 05: [V1] Sleep button is handled as a control method device */
278
#define ACPI_FADT_FIXED_RTC (1<<6) /* 06: [V1] RTC wakeup status not in fixed register space */
279
#define ACPI_FADT_S4_RTC_WAKE (1<<7) /* 07: [V1] RTC alarm can wake system from S4 */
280
#define ACPI_FADT_32BIT_TIMER (1<<8) /* 08: [V1] ACPI timer width is 32-bit (0=24-bit) */
281
#define ACPI_FADT_DOCKING_SUPPORTED (1<<9) /* 09: [V1] Docking supported */
282
#define ACPI_FADT_RESET_REGISTER (1<<10) /* 10: [V2] System reset via the FADT RESET_REG supported */
283
#define ACPI_FADT_SEALED_CASE (1<<11) /* 11: [V3] No internal expansion capabilities and case is sealed */
284
#define ACPI_FADT_HEADLESS (1<<12) /* 12: [V3] No local video capabilities or local input devices */
285
#define ACPI_FADT_SLEEP_TYPE (1<<13) /* 13: [V3] Must execute native instruction after writing SLP_TYPx register */
286
#define ACPI_FADT_PCI_EXPRESS_WAKE (1<<14) /* 14: [V4] System supports PCIEXP_WAKE (STS/EN) bits (ACPI 3.0) */
287
#define ACPI_FADT_PLATFORM_CLOCK (1<<15) /* 15: [V4] OSPM should use platform-provided timer (ACPI 3.0) */
288
#define ACPI_FADT_S4_RTC_VALID (1<<16) /* 16: [V4] Contents of RTC_STS valid after S4 wake (ACPI 3.0) */
289
#define ACPI_FADT_REMOTE_POWER_ON (1<<17) /* 17: [V4] System is compatible with remote power on (ACPI 3.0) */
290
#define ACPI_FADT_APIC_CLUSTER (1<<18) /* 18: [V4] All local APICs must use cluster model (ACPI 3.0) */
291
#define ACPI_FADT_APIC_PHYSICAL (1<<19) /* 19: [V4] All local x_aPICs must use physical dest mode (ACPI 3.0) */
292
293
/* Values for preferred_profile (Preferred Power Management Profiles) */
294
295
enum acpi_prefered_pm_profiles {
296
PM_UNSPECIFIED = 0,
297
PM_DESKTOP = 1,
298
PM_MOBILE = 2,
299
PM_WORKSTATION = 3,
300
PM_ENTERPRISE_SERVER = 4,
301
PM_SOHO_SERVER = 5,
302
PM_APPLIANCE_PC = 6
303
};
304
305
/* Reset to default packing */
306
307
#pragma pack()
308
309
#define ACPI_FADT_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_table_fadt, f)
310
311
/*
312
* Internal table-related structures
313
*/
314
union acpi_name_union {
315
u32 integer;
316
char ascii[4];
317
};
318
319
/* Internal ACPI Table Descriptor. One per ACPI table. */
320
321
struct acpi_table_desc {
322
acpi_physical_address address;
323
struct acpi_table_header *pointer;
324
u32 length; /* Length fixed at 32 bits */
325
union acpi_name_union signature;
326
acpi_owner_id owner_id;
327
u8 flags;
328
};
329
330
/* Masks for Flags field above */
331
332
#define ACPI_TABLE_ORIGIN_UNKNOWN (0)
333
#define ACPI_TABLE_ORIGIN_MAPPED (1)
334
#define ACPI_TABLE_ORIGIN_ALLOCATED (2)
335
#define ACPI_TABLE_ORIGIN_OVERRIDE (4)
336
#define ACPI_TABLE_ORIGIN_MASK (7)
337
#define ACPI_TABLE_IS_LOADED (8)
338
339
/*
340
* Get the remaining ACPI tables
341
*/
342
343
#include <acpi/actbl1.h>
344
#include <acpi/actbl2.h>
345
346
/*
347
* Sizes of the various flavors of FADT. We need to look closely
348
* at the FADT length because the version number essentially tells
349
* us nothing because of many BIOS bugs where the version does not
350
* match the expected length. In other words, the length of the
351
* FADT is the bottom line as to what the version really is.
352
*
353
* For reference, the values below are as follows:
354
* FADT V1 size: 0x74
355
* FADT V2 size: 0x84
356
* FADT V3+ size: 0xF4
357
*/
358
#define ACPI_FADT_V1_SIZE (u32) (ACPI_FADT_OFFSET (flags) + 4)
359
#define ACPI_FADT_V2_SIZE (u32) (ACPI_FADT_OFFSET (reserved4[0]) + 3)
360
#define ACPI_FADT_V3_SIZE (u32) (sizeof (struct acpi_table_fadt))
361
362
#endif /* __ACTBL_H__ */
363
364