Path: blob/main/tests/netconvert/meta/write_template_commented_full/cfg.netconvert
185788 views
<?xml version="1.0" encoding="UTF-8"?>
<!-- generated on 2025-11-14T15:06:47.605373+01:00 by Eclipse SUMO netconvert v1_25_0+0045-28a3daf62ee
-->
<netconvertConfiguration xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://sumo.dlr.de/xsd/netconvertConfiguration.xsd">
<configuration>
<!-- Loads the named config on startup -->
<configuration-file value="" synonymes="c configuration" type="FILE"/>
<!-- Saves current configuration into FILE -->
<save-configuration value="" synonymes="C save-config" type="FILE"/>
<!-- Enforce relative paths when saving the configuration -->
<save-configuration.relative value="false" synonymes="save-config.relative" type="BOOL"/>
<!-- Saves a configuration template (empty) into FILE -->
<save-template value="" type="FILE"/>
<!-- Saves the configuration schema into FILE -->
<save-schema value="" type="FILE"/>
<!-- Adds comments to saved template, configuration, or schema -->
<save-commented value="" synonymes="save-template.commented" type="BOOL"/>
</configuration>
<input>
<!-- Read SUMO-net from FILE -->
<sumo-net-file value="" synonymes="net-file s sumo-net" deprecated="sumo-net" type="FILE"/>
<!-- Read XML-node defs from FILE -->
<node-files value="" synonymes="n nodes xml-node-files xml-nodes" deprecated="xml-node-files xml-nodes" type="FILE"/>
<!-- Read XML-edge defs from FILE -->
<edge-files value="" synonymes="e edges xml-edge-files xml-edges" deprecated="xml-edge-files xml-edges" type="FILE"/>
<!-- Read XML-connection defs from FILE -->
<connection-files value="" synonymes="connections x xml-connection-files xml-connections" deprecated="xml-connection-files xml-connections" type="FILE"/>
<!-- Read XML-traffic light defs from FILE -->
<tllogic-files value="" synonymes="i" type="FILE"/>
<!-- Read XML-type defs from FILE -->
<type-files value="" synonymes="t types xml-type-files xml-types" deprecated="xml-type-files xml-types" type="FILE"/>
<!-- Reads public transport stops from FILE -->
<ptstop-files value="" type="FILE"/>
<!-- Reads public transport lines from FILE -->
<ptline-files value="" type="FILE"/>
<!-- Reads polygons from FILE for embedding in network where applicable -->
<polygon-files value="" type="FILE"/>
<!-- Read shapefiles (ArcView, Tiger, ...) from files starting with 'FILE' -->
<shapefile-prefix value="" synonymes="arcview shapefile tiger" deprecated="arcview tiger" type="FILE"/>
<!-- Read converted Navteq GDF data (unsplitted Elmar-network) from path 'FILE' -->
<dlr-navteq-prefix value="" synonymes="dlr-navteq elmar2" deprecated="elmar2" type="FILE"/>
<!-- Read OSM-network from path 'FILE(s)' -->
<osm-files value="" synonymes="osm" type="FILE"/>
<!-- Read OpenDRIVE-network from FILE -->
<opendrive-files value="" synonymes="opendrive" type="FILE"/>
<!-- Read VISUM-net from FILE -->
<visum-file value="" synonymes="visum" type="FILE"/>
<!-- Read VISSIM-net from FILE -->
<vissim-file value="" synonymes="vissim" type="FILE"/>
<!-- Read RoboCup-net from DIR -->
<robocup-dir value="" synonymes="robocup robocup-net" deprecated="robocup-net" type="FILE"/>
<!-- Read MATSim-net from FILE -->
<matsim-files value="" synonymes="matsim" type="FILE"/>
<!-- Read ITSUMO-net from FILE -->
<itsumo-files value="" synonymes="itsumo" type="FILE"/>
<!-- Read heightmap from ArcGIS shapefile -->
<heightmap.shapefiles value="" type="FILE"/>
<!-- Read heightmap from GeoTIFF -->
<heightmap.geotiff value="" type="FILE"/>
</input>
<output>
<!-- Include license info into every output file -->
<write-license value="false" type="BOOL"/>
<!-- Write parsable metadata (configuration etc.) instead of comments -->
<write-metadata value="false" type="BOOL"/>
<!-- Prefix which is applied to all output files. The special string 'TIME' is replaced by the current time. -->
<output-prefix value="" type="STR"/>
<!-- Suffix which is applied to all output files. The special string 'TIME' is replaced by the current time. -->
<output-suffix value="" type="STR"/>
<!-- Defines the number of digits after the comma for floating point output -->
<precision value="2" type="INT"/>
<!-- Defines the number of digits after the comma for lon,lat output -->
<precision.geo value="6" type="INT"/>
<!-- Defines the standard compression algorithm (currently only for parquet output) -->
<output.compression value="" type="STR"/>
<!-- Defines the standard output format if not derivable from the file name ('xml', 'csv', 'parquet') -->
<output.format value="xml" type="STR"/>
<!-- How to derive column headers from attribute names ('none', 'tag', 'auto', 'plain') -->
<output.column-header value="tag" type="STR"/>
<!-- Separator in CSV output -->
<output.column-separator value=";" type="STR"/>
<!-- Write time values as hour:minute:second or day:hour:minute:second rather than seconds -->
<human-readable-time value="false" synonymes="H" type="BOOL"/>
<!-- The generated net will be written to FILE -->
<output-file value="" synonymes="o output sumo-output" type="FILE"/>
<!-- Prefix of files to write plain xml nodes, edges and connections to -->
<plain-output-prefix value="" synonymes="p plain plain-output" type="FILE"/>
<!-- Write all lanes and their attributes even when they are not customized -->
<plain-output.lanes value="false" type="BOOL"/>
<!-- Writes information about joined junctions to FILE (can be loaded as additional node-file to reproduce joins -->
<junctions.join-output value="" type="FILE"/>
<!-- Defines a prefix for edge and junction IDs -->
<prefix value="" type="STR"/>
<!-- Defines a prefix for junction IDs -->
<prefix.junction value="" type="STR"/>
<!-- Defines a prefix for edge IDs -->
<prefix.edge value="" type="STR"/>
<!-- The generated net will be written to FILE using Amitran format -->
<amitran-output value="" type="FILE"/>
<!-- The generated net will be written to FILE using MATSim format -->
<matsim-output value="" type="FILE"/>
<!-- The generated net will be written to FILE using OpenDRIVE format -->
<opendrive-output value="" type="FILE"/>
<!-- The generated net will be written to dlr-navteq files with the given PREFIX -->
<dlr-navteq-output value="" type="FILE"/>
<!-- The dlr-navteq output format version to write -->
<dlr-navteq.version value="6.5" type="STR"/>
<!-- The network coordinates are written with the specified level of output precision -->
<dlr-navteq.precision value="2" type="INT"/>
<!-- Street names will be included in the output (if available) -->
<output.street-names value="false" type="BOOL"/>
<!-- Writes original names, if given, as parameter -->
<output.original-names value="false" type="BOOL"/>
<!-- Writes IDs of nodes remove with --geometry.remove into edge param -->
<output.removed-nodes value="false" type="BOOL"/>
<!-- Writes street signs as POIs to FILE -->
<street-sign-output value="" type="FILE"/>
<!-- Writes public transport stops to FILE -->
<ptstop-output value="" type="FILE"/>
<!-- Writes public transport lines to FILE -->
<ptline-output value="" type="FILE"/>
<!-- Clean-up pt stops that are not served by any line -->
<ptline-clean-up value="false" type="BOOL"/>
<!-- Writes parking areas to FILE -->
<parking-output value="" type="FILE"/>
<!-- Analyze topology of the railway network -->
<railway.topology.output value="" type="FILE"/>
<!-- Write shapes that are embedded in the network input and that are not supported by polyconvert (OpenDRIVE) -->
<polygon-output value="" synonymes="taz-output" type="FILE"/>
<!-- Builds parameterized curves whenever the angular change between straight segments exceeds FLOAT degrees -->
<opendrive-output.straight-threshold value="1e-08" type="FLOAT"/>
<!-- Write lanes in lefthand networks on the left side (positive indices) -->
<opendrive-output.lefthand-left value="false" type="BOOL"/>
<!-- Match loaded shapes to the closest edge within FLOAT and export as road objects -->
<opendrive-output.shape-match-dist value="-1" type="FLOAT"/>
</output>
<projection>
<!-- Uses a simple method for projection -->
<simple-projection value="false" synonymes="proj.simple" deprecated="proj.simple" type="BOOL"/>
<!-- Scaling factor for input coordinates -->
<proj.scale value="1" type="FLOAT"/>
<!-- Rotation (clockwise degrees) for input coordinates -->
<proj.rotate value="0" type="FLOAT"/>
<!-- Determine the UTM zone (for a universal transversal mercator projection based on the WGS84 ellipsoid) -->
<proj.utm value="false" type="BOOL"/>
<!-- Determine the DHDN zone (for a transversal mercator projection based on the bessel ellipsoid, "Gauss-Krueger") -->
<proj.dhdn value="false" type="BOOL"/>
<!-- Uses STR as proj.4 definition for projection -->
<proj value="!" type="STR"/>
<!-- Inverses projection -->
<proj.inverse value="false" type="BOOL"/>
<!-- Convert from Gauss-Krueger to UTM -->
<proj.dhdnutm value="false" type="BOOL"/>
<!-- Write geo coordinates in plain-xml -->
<proj.plain-geo value="false" type="BOOL"/>
</projection>
<processing>
<!-- vmax is parsed as given in km/h -->
<speed-in-kmh value="false" type="BOOL"/>
<!-- Use YYYY-MM-DD date to determine the readiness of features under construction -->
<construction-date value="" type="STR"/>
<!-- Remove all z-data -->
<flatten value="false" type="BOOL"/>
<!-- If edge shapes do not end at the node positions, extend them -->
<plain.extend-edge-shape value="false" synonymes="xml.keep-shape" deprecated="xml.keep-shape" type="BOOL"/>
<!-- Remaps alphanumerical IDs of nodes and edges to ensure that all IDs are integers -->
<numerical-ids value="false" type="BOOL"/>
<!-- Remaps IDs of nodes to integers starting at INT -->
<numerical-ids.node-start value="2147483647" type="INT"/>
<!-- Remaps IDs of edges to integers starting at INT -->
<numerical-ids.edge-start value="2147483647" type="INT"/>
<!-- Ensures that generated ids do not included any of the typed IDs from FILE (sumo-gui selection file format) -->
<reserved-ids value="" type="FILE"/>
<!-- Ensures that objects with typed IDs from FILE (sumo-gui selection file format) are not renamed -->
<kept-ids value="" type="FILE"/>
<!-- Removes vehicle class restrictions from imported edges -->
<dismiss-vclasses value="false" type="BOOL"/>
<!-- Splits edges across geometry nodes -->
<geometry.split value="false" synonymes="split-geometry" deprecated="split-geometry" type="BOOL"/>
<!-- Replace nodes which only define edge geometry by geometry points (joins edges) -->
<geometry.remove value="false" synonymes="R remove-geometry" deprecated="remove-geometry" type="BOOL"/>
<!-- Ensure that the given list of edges is not modified -->
<geometry.remove.keep-edges.explicit value="" type="STR[]"/>
<!-- Ensure that the edges in FILE are not modified (Each id on a single line. Selection files from sumo-gui are also supported) -->
<geometry.remove.keep-edges.input-file value="" type="FILE"/>
<!-- Ensure that edges with public transport stops are not modified -->
<geometry.remove.keep-ptstops value="false" type="BOOL"/>
<!-- Allow merging edges with differing attributes when their length is below min-length -->
<geometry.remove.min-length value="0" type="FLOAT"/>
<!-- Allow merging edges with differing lane widths if the difference is below FLOAT -->
<geometry.remove.width-tolerance value="0" type="FLOAT"/>
<!-- Prevent removal of junctions with a size above FLOAT as defined by custom edge endpoints -->
<geometry.remove.max-junction-size value="-1" type="FLOAT"/>
<!-- splits geometry to restrict segment length -->
<geometry.max-segment-length value="0" type="FLOAT"/>
<!-- reduces too similar geometry points -->
<geometry.min-dist value="-1" type="FLOAT"/>
<!-- Warn about edge geometries with an angle above DEGREES in successive segments -->
<geometry.max-angle value="99" type="FLOAT"/>
<!-- Straighten edge geometries with an angle above max-angle successive segments -->
<geometry.max-angle.fix value="false" type="BOOL"/>
<!-- Warn about edge geometries with a turning radius less than METERS at the start or end -->
<geometry.min-radius value="9" type="FLOAT"/>
<!-- Straighten edge geometries to avoid turning radii less than geometry.min-radius -->
<geometry.min-radius.fix value="false" type="BOOL"/>
<!-- Straighten edge geometries to avoid turning radii less than geometry.min-radius (only railways) -->
<geometry.min-radius.fix.railways value="true" type="BOOL"/>
<!-- Warn if the junction shape is to far away from the original node position -->
<geometry.junction-mismatch-threshold value="20" type="FLOAT"/>
<!-- Warn if edges overlap by more than the given threshold value -->
<geometry.check-overlap value="0" type="FLOAT"/>
<!-- Ignore overlapping edges if they are separated vertically by the given threshold. -->
<geometry.check-overlap.vertical-threshold value="4" type="FLOAT"/>
<!-- Modify edge geometries to avoid overlap at junctions -->
<geometry.avoid-overlap value="true" type="BOOL"/>
<!-- join adjacent lanes that have the same permissions and which do not admit lane-changing (sidewalks and disallowed lanes) -->
<join-lanes value="false" type="BOOL"/>
<!-- Matches stops outside the road network to the referencing pt line when below the given distance -->
<ptline.match-dist value="100" type="FLOAT"/>
<!-- Skips automatic generation of stops on the bidi-edge of a loaded stop -->
<ptstop-output.no-bidi value="false" type="BOOL"/>
<!-- Warn about edge geometries with a grade in % above FLOAT. -->
<geometry.max-grade value="10" type="FLOAT"/>
<!-- Smooth edge geometries with a grade above the warning threshold. -->
<geometry.max-grade.fix value="true" type="BOOL"/>
<!-- Turn off normalizing node positions -->
<offset.disable-normalization value="false" synonymes="disable-normalize-node-positions" deprecated="disable-normalize-node-positions" type="BOOL"/>
<!-- Adds FLOAT to net x-positions -->
<offset.x value="0" synonymes="x-offset-to-apply" deprecated="x-offset-to-apply" type="FLOAT"/>
<!-- Adds FLOAT to net y-positions -->
<offset.y value="0" synonymes="y-offset-to-apply" deprecated="y-offset-to-apply" type="FLOAT"/>
<!-- Adds FLOAT to net z-positions -->
<offset.z value="0" type="FLOAT"/>
<!-- Flips the y-coordinate along zero -->
<flip-y-axis value="false" synonymes="flip-y" type="BOOL"/>
<!-- Enable roundabout-guessing -->
<roundabouts.guess value="true" synonymes="guess-roundabouts" deprecated="guess-roundabouts" type="BOOL"/>
<!-- Structures with a circumference above FLOAT threshold are not classified as roundabout -->
<roundabouts.guess.max-length value="3500" type="FLOAT"/>
<!-- Default visibility when approaching a roundabout -->
<roundabouts.visibility-distance value="9" type="FLOAT"/>
<!-- Enable guessing of opposite direction lanes usable for overtaking -->
<opposites.guess value="false" type="BOOL"/>
<!-- Ensure that opposite edges have the same length -->
<opposites.guess.fix-lengths value="true" type="BOOL"/>
<!-- Enable guessing of network fringe nodes -->
<fringe.guess value="false" type="BOOL"/>
<!-- Guess disconnected edges above the given speed as outer fringe -->
<fringe.guess.speed-threshold value="13.8889" type="FLOAT"/>
<!-- Assumes left-hand traffic on the network -->
<lefthand value="false" type="BOOL"/>
<!-- Merges edges which connect the same nodes and are close to each other (recommended for VISSIM import) -->
<edges.join value="false" type="BOOL"/>
<!-- Modifies all edge speeds by adding FLOAT -->
<speed.offset value="0" type="FLOAT"/>
<!-- Modifies all edge speeds by multiplying by FLOAT -->
<speed.factor value="1" type="FLOAT"/>
<!-- Modifies all edge speeds to at least FLOAT -->
<speed.minimum value="0" type="FLOAT"/>
<!-- Joins tram edges into road lanes with similar geometry (within FLOAT distance) -->
<edges.join-tram-dist value="-1" type="FLOAT"/>
</processing>
<building_defaults>
<!-- The default number of lanes in an edge -->
<default.lanenumber value="1" synonymes="L lanenumber" deprecated="lanenumber" type="INT"/>
<!-- The default width of lanes -->
<default.lanewidth value="-1" synonymes="lanewidth" deprecated="lanewidth" type="FLOAT"/>
<!-- The default method for computing lane shapes from edge shapes -->
<default.spreadtype value="right" type="STR"/>
<!-- The default speed on an edge (in m/s) -->
<default.speed value="13.89" synonymes="S speed" deprecated="speed" type="FLOAT"/>
<!-- The default friction on an edge -->
<default.friction value="1" synonymes="friction" deprecated="friction" type="FLOAT"/>
<!-- The default priority of an edge -->
<default.priority value="-1" synonymes="P priority" deprecated="priority" type="INT"/>
<!-- The default edge type -->
<default.type value="" type="STR"/>
<!-- The default width of added sidewalks -->
<default.sidewalk-width value="2" type="FLOAT"/>
<!-- The default width of added bike lanes -->
<default.bikelane-width value="1" type="FLOAT"/>
<!-- The default width of a pedestrian crossing -->
<default.crossing-width value="4" type="FLOAT"/>
<!-- The default speed 'limit' on a pedestrian crossing (in m/s) -->
<default.crossing-speed value="2.78" type="FLOAT"/>
<!-- The default speed 'limit' on a pedestrian walkingarea (in m/s) -->
<default.walkingarea-speed value="2.78" type="FLOAT"/>
<!-- The default for allowed vehicle classes -->
<default.allow value="" type="STR"/>
<!-- The default for disallowed vehicle classes -->
<default.disallow value="" type="STR"/>
<!-- Whether junctions should be kept clear by default -->
<default.junctions.keep-clear value="true" type="BOOL"/>
<!-- The default turning radius of intersections -->
<default.junctions.radius value="4" type="FLOAT"/>
<!-- The default length when overriding connection lengths -->
<default.connection-length value="-1" type="FLOAT"/>
<!-- Whether/where connections should have an internal junction -->
<default.connection.cont-pos value="-1" type="FLOAT"/>
<!-- The default algorithm for computing right of way rules ('default', 'edgePriority') -->
<default.right-of-way value="default" type="STR"/>
</building_defaults>
<tls_building>
<!-- Does not instantiate traffic lights loaded from other formats than plain-XML -->
<tls.discard-loaded value="false" type="BOOL"/>
<!-- Does not instantiate traffic lights at geometry-like nodes loaded from other formats than plain-XML -->
<tls.discard-simple value="false" type="BOOL"/>
<!-- Interprets STR[] as list of junctions to be controlled by TLS -->
<tls.set value="" synonymes="explicite-tls" deprecated="explicite-tls" type="STR[]"/>
<!-- Interprets STR[] as list of junctions to be not controlled by TLS -->
<tls.unset value="" synonymes="explicite-no-tls" deprecated="explicite-no-tls" type="STR[]"/>
<!-- Turns on TLS guessing -->
<tls.guess value="false" synonymes="guess-tls" deprecated="guess-tls" type="BOOL"/>
<!-- Sets minimum value for the sum of all incoming lane speeds when guessing TLS -->
<tls.guess.threshold value="69.4444" type="FLOAT"/>
<!-- Sets district nodes as tls-controlled -->
<tls.taz-nodes value="false" synonymes="tls-guess.district-nodes" deprecated="tls-guess.district-nodes" type="BOOL"/>
<!-- Includes node clusters into guess -->
<tls.guess.joining value="false" synonymes="tls-guess.joining" deprecated="tls-guess.joining" type="BOOL"/>
<!-- Tries to cluster tls-controlled nodes -->
<tls.join value="false" synonymes="try-join-tls" deprecated="try-join-tls" type="BOOL"/>
<!-- Determines the maximal distance for joining traffic lights (defaults to 20) -->
<tls.join-dist value="20" type="FLOAT"/>
<!-- Interprets STR[] as list of tls ids to exclude from joining -->
<tls.join-exclude value="" type="STR[]"/>
<!-- Do not control edges that lie fully within a joined traffic light. This may cause collisions but allows old traffic light plans to be used -->
<tls.uncontrolled-within value="false" type="BOOL"/>
<!-- Do not build mutually conflicting response matrix, potentially ignoring vehicles that are stuck at an internal junction when their phase has ended -->
<tls.ignore-internal-junction-jam value="false" type="BOOL"/>
<!-- Interprets tls nodes surrounding an intersection as signal positions for a larger TLS. This is typical pattern for OSM-derived networks -->
<tls.guess-signals value="false" type="BOOL"/>
<!-- Distance for interpreting nodes as signal locations -->
<tls.guess-signals.dist value="25" type="FLOAT"/>
<!-- Number of uncontrolled entry edges to accept and still consider the central node as a traffic light -->
<tls.guess-signals.slack value="0" type="INT"/>
<!-- Use INT as cycle duration -->
<tls.cycle.time value="90" type="INT"/>
<!-- Use INT as green phase duration -->
<tls.green.time value="31" synonymes="traffic-light-green" deprecated="traffic-light-green" type="INT"/>
<!-- Defines smallest vehicle deceleration -->
<tls.yellow.min-decel value="3" synonymes="D min-decel" deprecated="min-decel" type="FLOAT"/>
<!-- Given yellow times are patched even if being too short -->
<tls.yellow.patch-small value="false" synonymes="patch-small-tyellow" deprecated="patch-small-tyellow" type="BOOL"/>
<!-- Set INT as fixed time for yellow phase durations -->
<tls.yellow.time value="-1" synonymes="traffic-light-yellow" deprecated="traffic-light-yellow" type="INT"/>
<!-- Set INT as fixed time for red phase duration at traffic lights that do not have a conflicting flow -->
<tls.red.time value="5" type="INT"/>
<!-- Set INT as fixed time for intermediate red phase after every switch -->
<tls.allred.time value="0" type="INT"/>
<!-- Use FLOAT as threshold for allowing left-turning vehicles to move in the same phase as oncoming straight-going vehicles -->
<tls.minor-left.max-speed value="19.44" type="FLOAT"/>
<!-- Use INT as green phase duration for left turns (s). Setting this value to 0 disables additional left-turning phases -->
<tls.left-green.time value="6" type="INT"/>
<!-- Set INT as fixed time for intermediate vehext phase after every switch -->
<tls.nema.vehExt value="2" type="INT"/>
<!-- Set INT as fixed time for intermediate NEMA yellow phase after every switch -->
<tls.nema.yellow value="3" type="INT"/>
<!-- Set INT as fixed time for intermediate NEMA red phase after every switch -->
<tls.nema.red value="2" type="INT"/>
<!-- Use INT as minimum green duration for pedestrian crossings (s). -->
<tls.crossing-min.time value="4" type="INT"/>
<!-- Use INT as clearance time for pedestrian crossings (s). -->
<tls.crossing-clearance.time value="5" type="INT"/>
<!-- Use INT as green phase duration for pedestrian scramble phase (s). -->
<tls.scramble.time value="5" type="INT"/>
<!-- TLSs in STR[] will be shifted by half-phase -->
<tls.half-offset value="" synonymes="tl-logics.half-offset" deprecated="tl-logics.half-offset" type="STR[]"/>
<!-- TLSs in STR[] will be shifted by quarter-phase -->
<tls.quarter-offset value="" synonymes="tl-logics.quarter-offset" deprecated="tl-logics.quarter-offset" type="STR[]"/>
<!-- TLSs with unspecified type will use STR as their algorithm -->
<tls.default-type value="static" type="STR"/>
<!-- Set phase layout four grouping opposite directions or grouping all movements for one incoming edge ['opposites', 'incoming'] -->
<tls.layout value="opposites" type="STR"/>
<!-- Avoid phases with green and red signals for different connections from the same lane -->
<tls.no-mixed value="false" type="BOOL"/>
<!-- Default minimum phase duration for traffic lights with variable phase length -->
<tls.min-dur value="5" type="INT"/>
<!-- Default maximum phase duration for traffic lights with variable phase length -->
<tls.max-dur value="50" type="INT"/>
<!-- Assign the same tls link index to connections that share the same states -->
<tls.group-signals value="false" type="BOOL"/>
<!-- Assign a distinct tls link index to every connection -->
<tls.ungroup-signals value="false" type="BOOL"/>
<!-- rebuild all traffic light plans in the network -->
<tls.rebuild value="false" type="BOOL"/>
</tls_building>
<ramp_guessing>
<!-- Enable ramp-guessing -->
<ramps.guess value="false" synonymes="guess-ramps" deprecated="guess-ramps" type="BOOL"/>
<!-- Guess on-ramps and mark acceleration lanes if they exist but do not add new lanes -->
<ramps.guess-acceleration-lanes value="true" type="BOOL"/>
<!-- Treat edges with speed > FLOAT as no ramps -->
<ramps.max-ramp-speed value="-1" synonymes="ramp-guess.max-ramp-speed" deprecated="ramp-guess.max-ramp-speed" type="FLOAT"/>
<!-- Treat edges with speed < FLOAT as no highways -->
<ramps.min-highway-speed value="21.9444" synonymes="ramp-guess.min-highway-speed" deprecated="ramp-guess.min-highway-speed" type="FLOAT"/>
<!-- Use FLOAT as ramp-length -->
<ramps.ramp-length value="100" synonymes="ramp-guess.ramp-length" deprecated="ramp-guess.ramp-length" type="FLOAT"/>
<!-- Use FLOAT as minimum ramp-length -->
<ramps.min-weave-length value="50" type="FLOAT"/>
<!-- Tries to handle the given edges as ramps -->
<ramps.set value="" synonymes="ramp-guess.explicite" deprecated="ramp-guess.explicite" type="STR[]"/>
<!-- Do not consider the given edges as ramps -->
<ramps.unset value="" type="STR[]"/>
<!-- Avoids edge splitting -->
<ramps.no-split value="false" synonymes="ramp-guess.no-split" deprecated="ramp-guess.no-split" type="BOOL"/>
</ramp_guessing>
<edge_removal>
<!-- Only keep edges with speed in meters/second > FLOAT -->
<keep-edges.min-speed value="-1" synonymes="edges-min-speed" deprecated="edges-min-speed" type="FLOAT"/>
<!-- Remove edges in STR[] -->
<remove-edges.explicit value="" synonymes="remove-edges" type="STR[]"/>
<!-- Only keep edges in STR[] or those which are kept due to other keep-edges or remove-edges options -->
<keep-edges.explicit value="" synonymes="keep-edges" type="STR[]"/>
<!-- Only keep edges in FILE (Each id on a single line. Selection files from sumo-gui are also supported) or those which are kept due to other keep-edges or remove-edges options -->
<keep-edges.input-file value="" type="FILE"/>
<!-- Remove edges in FILE. (Each id on a single line. Selection files from sumo-gui are also supported) -->
<remove-edges.input-file value="" type="FILE"/>
<!-- Remove edges after loading, patching and joining -->
<keep-edges.postload value="false" type="BOOL"/>
<!-- Only keep edges which are located within the given boundary (given either as CARTESIAN corner coordinates <xmin,ymin,xmax,ymax> or as polygon <x0,y0,x1,y1,...>) -->
<keep-edges.in-boundary value="" type="STR[]"/>
<!-- Only keep edges which are located within the given boundary (given either as GEODETIC corner coordinates <lon-min,lat-min,lon-max,lat-max> or as polygon <lon0,lat0,lon1,lat1,...>) -->
<keep-edges.in-geo-boundary value="" type="STR[]"/>
<!-- Only keep edges which allow one of the vclasses in STR[] -->
<keep-edges.by-vclass value="" type="STR[]"/>
<!-- Remove edges which allow only vclasses from STR[] -->
<remove-edges.by-vclass value="" type="STR[]"/>
<!-- Only keep edges where type is in STR[] -->
<keep-edges.by-type value="" type="STR[]"/>
<!-- Only keep the INT largest weakly connected components -->
<keep-edges.components value="0" type="INT"/>
<!-- Remove edges where type is in STR[] -->
<remove-edges.by-type value="" type="STR[]"/>
<!-- Removes isolated edges -->
<remove-edges.isolated value="false" synonymes="remove-isolated" deprecated="remove-isolated" type="BOOL"/>
<!-- Only keep lanes with width in meters > FLOAT -->
<keep-lanes.min-width value="0.01" type="FLOAT"/>
</edge_removal>
<unregulated_nodes>
<!-- All nodes will be unregulated -->
<keep-nodes-unregulated value="false" synonymes="keep-unregulated" type="BOOL"/>
<!-- Do not regulate nodes in STR[] -->
<keep-nodes-unregulated.explicit value="" synonymes="keep-unregulated.explicit keep-unregulated.nodes" deprecated="keep-unregulated.nodes" type="STR[]"/>
<!-- Do not regulate district nodes -->
<keep-nodes-unregulated.district-nodes value="false" synonymes="keep-unregulated.district-nodes" type="BOOL"/>
</unregulated_nodes>
<junctions>
<!-- Allow building right-before-left junctions when the incoming edge speeds are below FLOAT (m/s) -->
<junctions.right-before-left.speed-threshold value="13.6111" type="FLOAT"/>
<!-- Build left-before-right junctions instead of right-before-left junctions -->
<junctions.left-before-right value="false" type="BOOL"/>
<!-- Omits internal links -->
<no-internal-links value="false" type="BOOL"/>
<!-- Disables building turnarounds -->
<no-turnarounds value="false" type="BOOL"/>
<!-- Disables building turnarounds at tls-controlled junctions -->
<no-turnarounds.tls value="false" synonymes="no-tls-turnarounds" deprecated="no-tls-turnarounds" type="BOOL"/>
<!-- Disables building turnarounds at geometry-like junctions -->
<no-turnarounds.geometry value="true" type="BOOL"/>
<!-- Disables building turnarounds except at dead end junctions -->
<no-turnarounds.except-deadend value="false" type="BOOL"/>
<!-- Disables building turnarounds except at at junctions with a dedicated turning lane -->
<no-turnarounds.except-turnlane value="false" type="BOOL"/>
<!-- Disables building turnarounds at fringe junctions -->
<no-turnarounds.fringe value="false" type="BOOL"/>
<!-- Disables building connections to left -->
<no-left-connections value="false" type="BOOL"/>
<!-- Joins junctions that are close to each other (recommended for OSM import) -->
<junctions.join value="false" type="BOOL"/>
<!-- Determines the maximal distance for joining junctions (defaults to 10) -->
<junctions.join-dist value="10" type="FLOAT"/>
<!-- The angular threshold in degress for rejection of parallel edges when joining junctions -->
<junctions.join.parallel-threshold value="30" type="FLOAT"/>
<!-- Interprets STR[] as list of junctions to exclude from joining -->
<junctions.join-exclude value="" type="STR[]"/>
<!-- Joins junctions that have similar coordinates even if not connected -->
<junctions.join-same value="-1" type="FLOAT"/>
<!-- Attach junction to the closest edge within FLOAT distance that has it's id in param removedNodeIDs (for joining networks) -->
<junctions.attach-removed value="-1" type="FLOAT"/>
<!-- Abbreviate junction or TLS id if it joins more than INT junctions -->
<max-join-ids value="4" type="INT"/>
<!-- Generate INT intermediate points to smooth out intersection corners -->
<junctions.corner-detail value="5" type="INT"/>
<!-- Generate INT intermediate points to smooth out lanes within the intersection -->
<junctions.internal-link-detail value="5" type="INT"/>
<!-- Generate longer intersections to allow for smooth s-curves when the number of lanes changes -->
<junctions.scurve-stretch value="0" type="FLOAT"/>
<!-- Builds common edges for turning connections with common from- and to-edge. This causes discrepancies between geometrical length and assigned length due to averaging but enables lane-changing while turning -->
<junctions.join-turns value="false" type="BOOL"/>
<!-- Limits speed on junctions to an average lateral acceleration of at most FLOAT (m/s^2) -->
<junctions.limit-turn-speed value="5.5" type="FLOAT"/>
<!-- Do not limit turn speed for angular changes below FLOAT (degrees). The value is subtracted from the geometric angle before computing the turning radius. -->
<junctions.limit-turn-speed.min-angle value="15" type="FLOAT"/>
<!-- Do not limit turn speed for angular changes below FLOAT (degrees) on railway edges. The value is subtracted from the geometric angle before computing the turning radius. -->
<junctions.limit-turn-speed.min-angle.railway value="35" type="FLOAT"/>
<!-- Warn about turn speed limits that reduce the speed of straight connections by more than FLOAT -->
<junctions.limit-turn-speed.warn.straight value="5" type="FLOAT"/>
<!-- Warn about turn speed limits that reduce the speed of turning connections (no u-turns) by more than FLOAT -->
<junctions.limit-turn-speed.warn.turn value="22" type="FLOAT"/>
<!-- Default radius for junctions that do not require wide vehicle turns -->
<junctions.small-radius value="1.5" type="FLOAT"/>
<!-- Use maximum value of incoming and outgoing edge speed on junction instead of average -->
<junctions.higher-speed value="false" type="BOOL"/>
<!-- Build junctions with minimal shapes (ignoring edge overlap) -->
<junctions.minimal-shape value="false" type="BOOL"/>
<!-- Build junction shapes based on edge endpoints (ignoring edge overlap) -->
<junctions.endpoint-shape value="false" type="BOOL"/>
<!-- Assumed vehicle width for computing internal junction positions -->
<internal-junctions.vehicle-width value="1.8" type="FLOAT"/>
<!-- Forces rectangular cuts between lanes and intersections -->
<rectangular-lane-cut value="false" type="BOOL"/>
<!-- Allow driving onto a multi-lane road if there are foes on other lanes (at roundabouts) -->
<check-lane-foes.roundabout value="true" type="BOOL"/>
<!-- Allow driving onto a multi-lane road if there are foes on other lanes (everywhere) -->
<check-lane-foes.all value="false" type="BOOL"/>
</junctions>
<pedestrian>
<!-- Guess pedestrian sidewalks based on edge speed -->
<sidewalks.guess value="false" type="BOOL"/>
<!-- Add sidewalks for edges with a speed equal or below the given limit -->
<sidewalks.guess.max-speed value="13.89" type="FLOAT"/>
<!-- Add sidewalks for edges with a speed above the given limit -->
<sidewalks.guess.min-speed value="5.8" type="FLOAT"/>
<!-- Add sidewalks for edges that allow pedestrians on any of their lanes regardless of speed -->
<sidewalks.guess.from-permissions value="false" type="BOOL"/>
<!-- Do not guess sidewalks for the given list of edges -->
<sidewalks.guess.exclude value="" type="STR[]"/>
<!-- Guess pedestrian crossings based on the presence of sidewalks -->
<crossings.guess value="false" type="BOOL"/>
<!-- At uncontrolled nodes, do not build crossings across edges with a speed above the threshold -->
<crossings.guess.speed-threshold value="13.89" type="FLOAT"/>
<!-- Give priority to guessed crossings at roundabouts -->
<crossings.guess.roundabout-priority value="true" type="BOOL"/>
<!-- Always build walking areas even if there are no crossings -->
<walkingareas value="false" type="BOOL"/>
<!-- Do not create a walkingarea between sidewalks that are connected by a pedestrian junction within FLOAT -->
<walkingareas.join-dist value="15" type="FLOAT"/>
</pedestrian>
<bicycle>
<!-- Guess bike lanes based on edge speed -->
<bikelanes.guess value="false" type="BOOL"/>
<!-- Add bike lanes for edges with a speed equal or below the given limit -->
<bikelanes.guess.max-speed value="22.22" type="FLOAT"/>
<!-- Add bike lanes for edges with a speed above the given limit -->
<bikelanes.guess.min-speed value="5.8" type="FLOAT"/>
<!-- Add bike lanes for edges that allow bicycles on any of their lanes regardless of speed -->
<bikelanes.guess.from-permissions value="false" type="BOOL"/>
<!-- Do not guess bikelanes for the given list of edges -->
<bikelanes.guess.exclude value="" type="STR[]"/>
</bicycle>
<railway>
<!-- Discard all railway signal information loaded from other formats than plain-xml -->
<railway.signals.discard value="false" type="BOOL"/>
<!-- Repair topology of the railway network -->
<railway.topology.repair value="false" type="BOOL"/>
<!-- Repair topology of the railway network just enough to let loaded public transport lines to work -->
<railway.topology.repair.minimal value="false" type="BOOL"/>
<!-- Allow bidirectional rail use wherever rails with opposite directions meet at a straight angle -->
<railway.topology.repair.connect-straight value="false" type="BOOL"/>
<!-- Add turn-around connections at all loaded stops. -->
<railway.topology.repair.stop-turn value="false" type="BOOL"/>
<!-- Penalty factor for adding new bidi edges to connect public transport stops -->
<railway.topology.repair.bidi-penalty value="1.2" type="FLOAT"/>
<!-- Make all rails usable in both direction -->
<railway.topology.all-bidi value="false" type="BOOL"/>
<!-- Make all rails edge ids from FILE usable in both direction -->
<railway.topology.all-bidi.input-file value="" type="FILE"/>
<!-- Set edge priority values based on estimated main direction -->
<railway.topology.direction-priority value="false" type="BOOL"/>
<!-- Extend loaded edge priority values based on estimated main direction -->
<railway.topology.extend-priority value="false" type="BOOL"/>
<!-- Move junctions to straighten a sequence of rail edges -->
<railway.geometry.straighten value="false" type="BOOL"/>
<!-- Guess signals that guard public transport stops -->
<railway.signal.guess.by-stops value="false" type="BOOL"/>
<!-- List rail classes that may run without rail signals -->
<railway.signal.permit-unsignalized value="tram,cable_car" type="STR[]"/>
<!-- The search radius for finding suitable road accesses for rail stops -->
<railway.access-distance value="150" synonymes="osm.stop-output.footway-access-distance" deprecated="osm.stop-output.footway-access-distance" type="FLOAT"/>
<!-- The maximum road accesses registered per rail stops -->
<railway.max-accesses value="5" synonymes="osm.stop-output.footway-max-accesses" deprecated="osm.stop-output.footway-max-accesses" type="INT"/>
<!-- The walking length of the access is computed as air-line distance multiplied by FLOAT -->
<railway.access-factor value="1.5" synonymes="osm.stop-output.footway-access-factor" deprecated="osm.stop-output.footway-access-factor" type="FLOAT"/>
</railway>
<formats>
<!-- Remove the list of keys from all params -->
<discard-params value="" type="STR[]"/>
<!-- List vehicle classes that may ignore lane changing restrictions ('all' discards all restrictions) -->
<ignore-change-restrictions value="authority" type="STR[]"/>
<!-- Whether lane widths shall be ignored. -->
<ignore-widths value="false" synonymes="opendrive.ignore-widths" type="BOOL"/>
<!-- Skips the check for duplicate nodes and edges -->
<osm.skip-duplicates-check value="false" type="BOOL"/>
<!-- Imports elevation data -->
<osm.elevation value="false" type="BOOL"/>
<!-- Reconstruct (relative) elevation based on layer data. Each layer is raised by FLOAT m -->
<osm.layer-elevation value="0" type="FLOAT"/>
<!-- Maximum grade threshold in % at 50km/h when reconstructing elevation based on layer data. The value is scaled according to road speed. -->
<osm.layer-elevation.max-grade value="10" type="FLOAT"/>
<!-- Whether one-way roads should be spread to the side instead of centered -->
<osm.oneway-spread-right value="false" type="BOOL"/>
<!-- Import lane-specific access restrictions -->
<osm.lane-access value="false" type="BOOL"/>
<!-- Import bike lanes and fix directions and permissions on bike paths -->
<osm.bike-access value="false" synonymes="osm.bike-lanes" type="BOOL"/>
<!-- Import sidewalks -->
<osm.sidewalks value="false" type="BOOL"/>
<!-- Default to building two sidewalks on oneway streets (may affect divided roads) -->
<osm.oneway-reverse-sidewalk value="false" type="BOOL"/>
<!-- Import crossings -->
<osm.crossings value="false" type="BOOL"/>
<!-- Import turning arrows from OSM to help with connection building -->
<osm.turn-lanes value="false" type="BOOL"/>
<!-- The default length of a public transport stop in FLOAT m -->
<osm.stop-output.length value="25" type="FLOAT"/>
<!-- The default length of a bus stop in FLOAT m -->
<osm.stop-output.length.bus value="15" type="FLOAT"/>
<!-- The default length of a tram stop in FLOAT m -->
<osm.stop-output.length.tram value="25" type="FLOAT"/>
<!-- The default length of a train stop in FLOAT m -->
<osm.stop-output.length.train value="200" type="FLOAT"/>
<!-- Specify custom rules for importing railway signals -->
<osm.railsignals value="DEFAULT" type="STR[]"/>
<!-- Whether additional attributes shall be imported -->
<osm.all-attributes value="false" synonymes="osm.all-tags" type="BOOL"/>
<!-- List of additional attributes that shall be imported from OSM via osm.all-attributes (set 'all' to import all) -->
<osm.extra-attributes value="all" synonymes="osm.extra-tags" type="STR[]"/>
<!-- The speed limit to be set when there is no actual speed limit in reality -->
<osm.speedlimit-none value="39.4444" type="FLOAT"/>
<!-- Whether edges shoulds carry information on the usage of typemap defaults -->
<osm.annotate-defaults value="false" type="BOOL"/>
<!-- The edge lengths given in the MATSim-file will be kept -->
<matsim.keep-length value="false" type="BOOL"/>
<!-- The lane number will be computed from the capacity -->
<matsim.lanes-from-capacity value="false" type="BOOL"/>
<!-- Read edge ids from column STR -->
<shapefile.street-id value="" synonymes="arcview.street-id" deprecated="arcview.street-id" type="STR"/>
<!-- Read from-node ids from column STR -->
<shapefile.from-id value="" synonymes="arcview.from-id" deprecated="arcview.from-id" type="STR"/>
<!-- Read to-node ids from column STR -->
<shapefile.to-id value="" synonymes="arcview.to-id" deprecated="arcview.to-id" type="STR"/>
<!-- Read type ids from column STR -->
<shapefile.type-id value="" synonymes="arcview.type-id" deprecated="arcview.type-id" type="STR"/>
<!-- Read lane number from column STR -->
<shapefile.laneNumber value="" type="STR"/>
<!-- Read speed from column STR -->
<shapefile.speed value="" type="STR"/>
<!-- Read custom edge length from column STR -->
<shapefile.length value="" type="STR"/>
<!-- Read total edge width from column STR -->
<shapefile.width value="" type="STR"/>
<!-- Read (non-unique) name from column STR -->
<shapefile.name value="" type="STR"/>
<!-- Distance threshold for determining whether distinct shapes are connected (used when from-id and to-id are not available) -->
<shapefile.node-join-dist value="0" type="FLOAT"/>
<!-- Add the list of field names as edge params -->
<shapefile.add-params value="" type="STR[]"/>
<!-- Uses edge type defaults on problems -->
<shapefile.use-defaults-on-failure value="false" synonymes="arcview.use-defaults-on-failure" deprecated="arcview.use-defaults-on-failure" type="BOOL"/>
<!-- Insert edges in both directions -->
<shapefile.all-bidirectional value="false" synonymes="arcview.all-bidi shapefile.all-bidi" deprecated="arcview.all-bidi" type="BOOL"/>
<!-- Guess the proper projection -->
<shapefile.guess-projection value="false" synonymes="arcview.guess-projection" deprecated="arcview.guess-projection" type="BOOL"/>
<!-- Use traditional axis order (lon, lat) -->
<shapefile.traditional-axis-mapping value="false" type="BOOL"/>
<!-- Allow more vehicle classes by default -->
<dlr-navteq.tolerant-permissions value="false" type="BOOL"/>
<!-- The edge lengths given in the DLR Navteq-file will be kept -->
<dlr-navteq.keep-length value="false" type="BOOL"/>
<!-- Structure join offset -->
<vissim.join-distance value="5" synonymes="vissim.offset" deprecated="vissim.offset" type="FLOAT"/>
<!-- Use FLOAT as default speed -->
<vissim.default-speed value="50" type="FLOAT"/>
<!-- Factor for edge velocity -->
<vissim.speed-norm value="1" type="FLOAT"/>
<!-- Writes lanes without an explicit speed set -->
<vissim.report-unset-speeds value="false" type="BOOL"/>
<!-- Load language mappings from FILE -->
<visum.language-file value="" type="FILE"/>
<!-- Uses priorities from types -->
<visum.use-type-priority value="false" type="BOOL"/>
<!-- Uses lane numbers from types -->
<visum.use-type-laneno value="false" type="BOOL"/>
<!-- Uses speeds from types -->
<visum.use-type-speed value="false" type="BOOL"/>
<!-- Sets connector speed -->
<visum.connector-speeds value="100" type="FLOAT"/>
<!-- Sets connector lane number -->
<visum.connectors-lane-number value="3" synonymes="visum.connector-laneno" deprecated="visum.connector-laneno" type="INT"/>
<!-- Excludes connectors -->
<visum.no-connectors value="true" type="BOOL"/>
<!-- Computes the number of lanes from the edges' capacities -->
<visum.recompute-lane-number value="false" synonymes="visum.recompute-laneno" deprecated="visum.recompute-laneno" type="BOOL"/>
<!-- Prints all warnings, some of which are due to VISUM misbehaviour -->
<visum.verbose-warnings value="false" type="BOOL"/>
<!-- The factor for flow to no. lanes conversion -->
<visum.lanes-from-capacity.norm value="1800" synonymes="capacity-norm lanes-from-capacity.norm" deprecated="capacity-norm" type="FLOAT"/>
<!-- Imports all lane types -->
<opendrive.import-all-lanes value="false" type="BOOL"/>
<!-- The geometry resolution in m when importing curved geometries as line segments. -->
<opendrive.curve-resolution value="2" type="FLOAT"/>
<!-- Allow stop lines to be built beyond the start of the junction if the geometries allow so -->
<opendrive.advance-stopline value="0" type="FLOAT"/>
<!-- The minimum lane width for determining start or end of variable-width lanes -->
<opendrive.min-width value="1.8" type="FLOAT"/>
<!-- Import internal lane shapes -->
<opendrive.internal-shapes value="false" type="BOOL"/>
<!-- Sets edge-id based on road-id and offset in m (legacy) -->
<opendrive.position-ids value="false" type="BOOL"/>
<!-- Use custom lane shapes to compensate discarded lane types -->
<opendrive.lane-shapes value="false" type="BOOL"/>
<!-- Use the OpenDRIVE controller information for the generated signal program -->
<opendrive.signal-groups value="false" type="BOOL"/>
<!-- Ignore traffic signals which do not control any driving lane -->
<opendrive.ignore-misplaced-signals value="false" type="BOOL"/>
</formats>
<report>
<!-- Switches to verbose output -->
<verbose value="false" synonymes="v" type="BOOL"/>
<!-- Prints option values before processing -->
<print-options value="false" type="BOOL"/>
<!-- Prints this screen or selected topics -->
<help value="false" synonymes="?" type="BOOL"/>
<!-- Prints the current version -->
<version value="false" synonymes="V" type="BOOL"/>
<!-- Set schema validation scheme of XML inputs ("never", "local", "auto" or "always") -->
<xml-validation value="local" synonymes="X" type="STR"/>
<!-- Set schema validation scheme of SUMO network inputs ("never", "local", "auto" or "always") -->
<xml-validation.net value="never" type="STR"/>
<!-- Disables output of warnings -->
<no-warnings value="false" synonymes="W suppress-warnings" deprecated="suppress-warnings" type="BOOL"/>
<!-- Aggregate warnings of the same type whenever more than INT occur -->
<aggregate-warnings value="-1" type="INT"/>
<!-- Writes all messages to FILE (implies verbose) -->
<log value="" synonymes="l log-file" type="FILE"/>
<!-- Writes all non-error messages to FILE (implies verbose) -->
<message-log value="" type="FILE"/>
<!-- Writes all warnings and errors to FILE -->
<error-log value="" type="FILE"/>
<!-- Writes timestamps in front of all messages -->
<log.timestamps value="false" type="BOOL"/>
<!-- Writes process ID in front of all messages -->
<log.processid value="false" type="BOOL"/>
<!-- Language to use in messages -->
<language value="C" type="STR"/>
<!-- Continue on broken input -->
<ignore-errors value="false" synonymes="dismiss-loading-errors" deprecated="dismiss-loading-errors" type="BOOL"/>
<!-- Continue on invalid connections -->
<ignore-errors.connections value="false" type="BOOL"/>
<!-- Show errors in connections at parsing -->
<show-errors.connections-first-try value="false" type="BOOL"/>
<!-- Continue on unknown edge types -->
<ignore-errors.edge-type value="false" type="BOOL"/>
</report>
<random_number>
<!-- Initialises the random number generator with the current system time -->
<random value="false" synonymes="abs-rand" deprecated="abs-rand" type="BOOL"/>
<!-- Initialises the random number generator with the given value -->
<seed value="23423" synonymes="srand" deprecated="srand" type="INT"/>
</random_number>
</netconvertConfiguration>