# Provides support for Electron-based ports
#
# Feature: electron
# Usage: USES=electron:<version>[,ARGS]
# Valid ARGS: <version>, build, run, test, env
#
# <version>: A specific major version of Electron the port is based on.
# The port must specify exactly a single major version.
# build: Electron is needed at build time. Adds it to BUILD_DEPENDS.
# run: Electron is needed at run time. Adds it to RUN_DEPENDS.
# test: Electron is needed at test time. Adds it to TEST_DEPENDS.
# env: Electron is not needed at any of build, run, or test time.
# However, the port needs USE_ELECTRON features.
#
# NOTE 1: {build, run, test} and env are mutually exclusive. If the port
# specifies both of them, env takes precedence.
#
# NOTE 2: If the port specifies none of build, run or test, we assume the port
# requires all those dependencies.
#
# Variables, which may be set by the port:
#
# USE_ELECTRON: A list of additional features and functionalities to
# enable. Supported features are:
#
# npm: A node package manager the port uses.
# Supported package managers are:
#
# npm: The port uses NPM as package manager.
# yarn1: The port uses Yarn (v1) as package manager.
# yarn2: The port uses Yarn (v2 or v3) as package manager.
# yarn4: The port uses Yarn (v4+) as package manager.
# pnpm: The port uses PNPM as package manager.
#
# NOTE: The port must specify exactly a single package manager.
# Multiple package managers cannot be specified.
#
# Other valid arguments are:
#
# fetch, extract, build, run, and test,
#
# each of which corresponds to respective dependency. If the port
# does not specify any of those dependencies, we assume only
# build time dependency is required.
#
# appbuilder: An app-builder version the port uses. Supported
# arguments are:
#
# release: The port uses released version of app-builder and add
# devel/app-builder to BUILD_DEPENDS.
# devel: The port uses development version of app-builder and add
# devel/app-builder-devel to BUILD_DEPENDS.
#
# NOTE: If the port specifies none of those arguments, we assume
# release has been specified.
#
# prefetch: Downloads node modules the port uses according to the
# pre-stored package.json (and package-lock.json,
# yarn.lock, or pnpm-lock.yaml depending on the node
# package manager used) in PKGJSONSDIR. Downloaded node
# modules are archived into a single tarball as one of
# the DISTFILES.
#
# NOTE 1: If the source directory of the port has other relevant
# files than package.json and lockfile, the relevant files must
# also be copied into PKGJSONSDIR. (Examples of relevant files
# includes .npmrc, .yarnrc, and pnpm-workspace.yaml.)
#
# NOTE 2: If the source directory of the port contains multiple
# package.json's and/or lockfiles, all files needed for generating
# node modules archive must be copied into PKGJSONSDIR with
# directory hierarchy preserved.
#
# extract: Installs the prefetched node modules into the port's
# working source directory.
#
# rebuild: Rebuilds native node modules against nodejs or electron.
# Supported arguments are:
#
# nodejs: Rebuilds native node modules against the version of
# nodejs installed before pre-build phase so that nodejs
# can execute the native modules during build.
# electron: Rebuilds native node modules against the version of
# electron the port uses before do-build phase so that
# the native modules can be executed with electron on run
# time.
#
# NOTE: If the port specifies none of those arguments, we assume
# only electron has been specified.
#
# build: Prepares an electron application in a distributable
# format using the specified package builder as an
# argument. Supported arguments are:
#
# builder: Uses electron-builder for packaging.
# forge: Uses electron-forge for packaging.
# packager: Uses electron-packager for packaging.
#
# NOTE: The port must specify exactly a single argument. Multiple
# package builders cannot be specified.
#
# NPM_VER: A version of node package manager the port uses. If yarn
# 2 or later, or pnpm is used for the package manager, the
# framework requires the variable to be set so that it can
# bootstrap the correct version of package manager.
#
# It is usually specified as the key "packageManager" in
# package.json and the framework tries to automatically
# detect the version. Auto-detection can be overridden by
# manually specifying the value in Makefile.
#
# UPSTREAM_ELECTRON_VER:
# UPSTREAM_CHROMEDRIVER_VER:
# UPSTREAM_MKSNAPSHOT_VER:
# Electron, chromedriver, and mksnapshot versions the port
# depends on. Those versions are usually specified in
# either package-lock.json, yarn.lock, or pnpm-lock.yaml
# file in the port's source directory.
#
# The build process tries to automatically detect those
# versions so the port does not usually have to specify
# the values. Auto-detection can be overridden by manually
# specifying the values in Makefile.
#
# The build process will generate a zip archive and a
# checksum file of electron/chromedriver/mksnapshot to
# prevent the build phase from trying to download binary
# distribution files from GitHub.
#
# ELECTRON_MAKE_FLAGS: Additional command-line flags to pass to the specified
# package builder when build feature is used. The default
# flags are defined in this file.
#
# MAINTAINER: [email protected]
.if !defined(_INCLUDE_USES_ELECTRON_MK)
_INCLUDE_USES_ELECTRON_MK= yes
# Electron uses Node.js (actually a node package manager) for build
.include "${USESDIR}/nodejs.mk"
_VALID_ELECTRON_VERSIONS= 37 38 39 40
_VALID_ELECTRON_FEATURES= npm appbuilder prefetch extract rebuild build
_VALID_ELECTRON_FEATURES_NPM= npm yarn1 yarn2 yarn4 pnpm
_VALID_ELECTRON_FEATURES_APPBUILDER=release devel
_VALID_ELECTRON_FEATURES_REBUILD=nodejs electron
_VALID_ELECTRON_FEATURES_BUILD= builder forge packager
_ELECTRON_CMD_BASE= electron
_ELECTRON_PORT_BASE= devel/electron
_ELECTRON_DOWNLOAD_URL_BASE= https://github.com/electron/electron/releases/download
_NODEJS_PKGNAME= node${NODEJS_VERSION}
_NODEJS_PORT= www/node${NODEJS_VERSION}
# Process USES=electron[:ARGS]
# Detect build, run, test, or env dependency
_ELECTRON_ARGS= ${electron_ARGS:S/,/ /g}
. if ${_ELECTRON_ARGS:Mbuild}
_ELECTRON_BUILD_DEP= yes
_ELECTRON_ARGS:= ${_ELECTRON_ARGS:Nbuild}
. endif
. if ${_ELECTRON_ARGS:Mrun}
_ELECTRON_RUN_DEP= yes
_ELECTRON_ARGS:= ${_ELECTRON_ARGS:Nrun}
. endif
. if ${_ELECTRON_ARGS:Mtest}
_ELECTRON_TEST_DEP= yes
_ELECTRON_ARGS:= ${_ELECTRON_ARGS:Ntest}
. endif
. if ${_ELECTRON_ARGS:Menv}
_ELECTRON_NO_DEP= yes
_ELECTRON_ARGS:= ${_ELECTRON_ARGS:Nenv}
. endif
# If no dependencies are specified, assume build, run, and test are required
. if !defined(_ELECTRON_BUILD_DEP) && !defined(_ELECTRON_RUN_DEP) && \
!defined(_ELECTRON_TEST_DEP) && !defined(_ELECTRON_NO_DEP)
_ELECTRON_BUILD_DEP= yes
_ELECTRON_RUN_DEP= yes
_ELECTRON_TEST_DEP= yes
. endif
# Now _ELECTRON_ARGS should contain a single major version unless env is set
. if !defined(_ELECTRON_NO_DEP)
. if ${_VALID_ELECTRON_VERSIONS:M${_ELECTRON_ARGS}}
_ELECTRON_VERSION= ${_ELECTRON_ARGS}
_ELECTRON_PORTDIR= ${_ELECTRON_PORT_BASE}${_ELECTRON_VERSION}
. include "${PORTSDIR}/${_ELECTRON_PORTDIR}/Makefile.version"
. elif empty(_ELECTRON_ARGS)
IGNORE= does not specify a major version of electron with USES=electron
. else
IGNORE= specifies unknown USES=electron arguments: ${_ELECTRON_ARGS}
. endif
. endif
# Detect features used with USE_ELECTRON
. for var in ${USE_ELECTRON}
. if empty(_VALID_ELECTRON_FEATURES:M${var:C/\:.*//})
_INVALID_ELECTRON_FEATURES+= ${var}
. endif
. endfor
. if !empty(_INVALID_ELECTRON_FEATURES)
IGNORE= uses unknown USE_ELECTRON features: ${_INVALID_ELECTRON_FEATURES}
. endif
# Make each individual feature available as _ELECTRON_FEATURE_<FEATURENAME>
. for var in ${USE_ELECTRON}
_ELECTRON_FEATURE_${var:C/\:.*//:tu}= ${var}
. endfor
. if !defined(_ELECTRON_FEATURE_NPM)
IGNORE= does not specify a single node package manager with USE_ELECTRON=npm
. endif
# Process USE_ELECTRON=npm[:ARGS]
# Detect fetch, extract, build, run, or test dependency
_NODEJS_NPM?=
. if defined(_ELECTRON_FEATURE_NPM)
_ELECTRON_FEATURE_NPM:= ${_ELECTRON_FEATURE_NPM:S/,/ /g}
. if ${_ELECTRON_FEATURE_NPM:Mfetch}
_ELECTRON_FEATURE_NPM_FETCH= yes
_ELECTRON_FEATURE_NPM:= ${_ELECTRON_FEATURE_NPM:Nfetch}
. endif
. if ${_ELECTRON_FEATURE_NPM:Mextract}
_ELECTRON_FEATURE_NPM_EXTRACT= yes
_ELECTRON_FEATURE_NPM:= ${_ELECTRON_FEATURE_NPM:Nextract}
. endif
. if ${_ELECTRON_FEATURE_NPM:Mbuild}
_ELECTRON_FEATURE_NPM_BUILD= yes
_ELECTRON_FEATURE_NPM:= ${_ELECTRON_FEATURE_NPM:Nbuild}
. endif
. if ${_ELECTRON_FEATURE_NPM:Mrun}
_ELECTRON_FEATURE_NPM_RUN= yes
_ELECTRON_FEATURE_NPM:= ${_ELECTRON_FEATURE_NPM:Nrun}
. endif
. if ${_ELECTRON_FEATURE_NPM:Mtest}
_ELECTRON_FEATURE_NPM_TEST= yes
_ELECTRON_FEATURE_NPM:= ${_ELECTRON_FEATURE_NPM:Ntest}
. endif
# If no dependencies are specified, we assume only build dep is required
. if !defined(_ELECTRON_FEATURE_NPM_FETCH) && !defined(_ELECTRON_FEATURE_NPM_EXTRACT) && \
!defined(_ELECTRON_FEATURE_NPM_BUILD) && !defined(_ELECTRON_FEATURE_NPM_RUN) && \
!defined(_ELECTRON_FEATURE_NPM_TEST)
_ELECTRON_FEATURE_NPM_BUILD= yes
. endif
# Now _ELECTRON_FEATURE_NPM should contain a single package manager
. if ${_VALID_ELECTRON_FEATURES_NPM:M${_ELECTRON_FEATURE_NPM:C/^[^\:]*(\:|\$)//}}
_NODEJS_NPM= ${_ELECTRON_FEATURE_NPM:C/^[^\:]*(\:|\$)//}
. if ${_NODEJS_NPM} == npm
_NPM_PKGNAME= ${_NODEJS_NPM}${NODEJS_SUFFIX}
_NPM_PORTDIR= www/${_NODEJS_NPM}${NODEJS_SUFFIX}
. elif ${_NODEJS_NPM} == yarn1
_NPM_PKGNAME= yarn${NODEJS_SUFFIX}
_NPM_PORTDIR= www/yarn${NODEJS_SUFFIX}
. endif
. elif empty(_ELECTRON_FEATURES_NPM)
IGNORE= does not specify a single node package manager with USE_ELECTRON=npm
. else
IGNORE= specifies unknown USE_ELECTRON=npm arguments: ${_ELECTRON_FEATURE_NPM}
. endif
. endif
# Process USE_ELECTRON=appbuilder[:ARGS]
# Detect stable or devel argument of appbuilder feature
. if defined(_ELECTRON_FEATURE_APPBUILDER)
_ELECTRON_FEATURE_APPBUILDER:= ${_ELECTRON_FEATURE_APPBUILDER:C/^[^\:]*(\:|\$)//}
. if ${_ELECTRON_FEATURE_APPBUILDER:Mrelease}
_ELECTRON_FEATURE_APPBUILDER_RELEASE= yes
_ELECTRON_FEATURE_APPBUILDER:= ${_ELECTRON_FEATURE_APPBUILDER:Nrelease}
. endif
. if ${_ELECTRON_FEATURE_APPBUILDER:Mdevel}
_ELECTRON_FEATURE_APPBUILDER_DEVEL= yes
_ELECTRON_FEATURE_APPBUILDER:= ${_ELECTRON_FEATURE_APPBUILDER:Ndevel}
. endif
# If no arguments are specified, we assume release is specified
. if !defined(_ELECTRON_FEATURE_APPBUILDER_RELEASE) && \
!defined(_ELECTRON_FEATURE_APPBUILDER_DEVEL)
_ELECTRON_FEATURE_APPBUILDER_RELEASE= yes
. endif
. if !empty(_ELECTRON_FEATURE_APPBUILDER)
IGNORE= specifies unknown USE_ELECTRON=appbuilder arguments: ${_ELECTRON_FEATURE_APPBUILDER}
. endif
. endif
# Process USE_ELECTRON=rebuild[:ARGS]
# Detect nodejs or electron argument of rebuild feature
. if defined(_ELECTRON_FEATURE_REBUILD)
_ELECTRON_FEATURE_REBUILD:= ${_ELECTRON_FEATURE_REBUILD:C/^[^\:]*(\:|\$)//:S/,/ /g}
. if ${_ELECTRON_FEATURE_REBUILD:Mnodejs}
_ELECTRON_FEATURE_REBUILD_NODEJS= yes
_ELECTRON_FEATURE_REBUILD:= ${_ELECTRON_FEATURE_REBUILD:Nnodejs}
. endif
. if ${_ELECTRON_FEATURE_REBUILD:Melectron}
_ELECTRON_FEATURE_REBUILD_ELECTRON= yes
_ELECTRON_FEATURE_REBUILD:= ${_ELECTRON_FEATURE_REBUILD:Nelectron}
. endif
# If no arguments are specified, we assume electron is specified
. if !defined(_ELECTRON_FEATURE_REBUILD_NODEJS) && \
!defined(_ELECTRON_FEATURE_REBUILD_ELECTRON)
_ELECTRON_FEATURE_REBUILD_ELECTRON= yes
. endif
. if !empty(_ELECTRON_FEATURE_REBUILD)
IGNORE= specifies unknown USE_ELECTRON=rebuild arguments: ${_ELECTRON_FEATURE_REBUILD}
. endif
. endif
# Process USE_ELECTRON=build:ARG
# Detect builder used with USE_ELECTRON=builder
. if defined(_ELECTRON_FEATURE_BUILD)
. if ${_VALID_ELECTRON_FEATURES_BUILD:M${_ELECTRON_FEATURE_BUILD:C/^[^\:]*(\:|\$)//}}
_ELECTRON_FEATURE_BUILD:= ${_ELECTRON_FEATURE_BUILD:C/^[^\:]*(\:|\$)//}
. else
IGNORE= specifies unknown USE_ELECTRON=build arguments: ${_ELECTRON_FEATURE_BUILD}
. endif
. endif
# Setup dependencies
. for stage in BUILD RUN TEST
. if defined(_ELECTRON_${stage}_DEP) && ${_ELECTRON_${stage}_DEP} == yes
${stage}_DEPENDS+= ${_ELECTRON_CMD_BASE}${ELECTRON_VER_MAJOR}:${_ELECTRON_PORTDIR}
. endif
. endfor
. for stage in FETCH EXTRACT BUILD RUN TEST
. if defined(_ELECTRON_FEATURE_NPM_${stage}) && ${_ELECTRON_FEATURE_NPM_${stage}} == yes
. if ${_NODEJS_NPM} == npm || ${_NODEJS_NPM} == yarn1
${stage}_DEPENDS+= ${_NPM_PKGNAME}>0:${_NPM_PORTDIR}
. elif ${_NODEJS_NPM} == yarn2 || ${_NODEJS_NPM} == yarn4 || ${_NODEJS_NPM} == pnpm
${stage}_DEPENDS+= ${_NODEJS_PKGNAME}>0:${_NODEJS_PORT}
. endif
. endif
. endfor
. if defined(_ELECTRON_FEATURE_APPBUILDER_RELEASE) && ${_ELECTRON_FEATURE_APPBUILDER_RELEASE} == yes
BUILD_DEPENDS+= app-builder:devel/app-builder
. elif defined(_ELECTRON_FEATURE_APPBUILDER_DEVEL) && ${_ELECTRON_FEATURE_APPBUILDER_DEVEL} == yes
BUILD_DEPENDS+= app-builder:devel/app-builder-devel
. endif
# Define variables related to node package manager
NPM_FETCH_FLAGS?=
NPM_EXTRACT_FLAGS?=
NPM_EXEC_FLAGS?=
NPM_REBUILD_FLAGS?=
NPM_PKGFILE?= package.json
. if ${_NODEJS_NPM} == npm
NPM_LOCKFILE?= package-lock.json
NPM_MODULE_CACHE?= node_modules
NPM_CMDNAME?= npm
NPM_CACHE_SETUP_CMD?= ${DO_NADA}
NPM_FETCH_CMD?= ${NPM_CMDNAME} ci
NPM_FETCH_FLAGS+= --ignore-scripts --no-progress --no-audit --no-fund --no-update-notifier --loglevel=error
NPM_EXEC_CMD?= ${NPM_CMDNAME} exec
NPM_EXEC_FLAGS+= --no-update-notifier
NPM_REBUILD_CMD?= ${NPM_CMDNAME} rebuild
NPM_REBUILD_FLAGS+= --no-update-notifier
. elif ${_NODEJS_NPM:Myarn*}
NPM_LOCKFILE?= yarn.lock
NPM_MODULE_CACHE?= yarn-offline-cache
NPM_CMDNAME?= yarn
NPM_FETCH_CMD?= ${NPM_CMDNAME} install
NPM_EXTRACT_CMD?= ${NPM_CMDNAME} install
NPM_EXEC_CMD?= ${NPM_CMDNAME} exec
. if ${_NODEJS_NPM} == yarn1
NPM_CACHE_SETUP_CMD?= ${ECHO_CMD} 'yarn-offline-mirror "./${NPM_MODULE_CACHE}"' >> .yarnrc
NPM_FETCH_FLAGS+= --frozen-lockfile --ignore-scripts --silent
NPM_EXTRACT_FLAGS+= ${NPM_FETCH_FLAGS} --offline
. elif ${_NODEJS_NPM} == yarn2
NPM_CACHE_SETUP_CMD?= ${NPM_CMDNAME} config set cacheFolder "./${NPM_MODULE_CACHE}"
NPM_FETCH_FLAGS+= --immutable --mode=skip-build --silent
NPM_EXTRACT_SETUP_CMD?= ${SH} -c "${NPM_CMDNAME} config set enableNetwork false; \
${NPM_CMDNAME} config set enableInlineBuilds true"
NPM_EXTRACT_FLAGS+= ${NPM_FETCH_FLAGS} --immutable-cache
NPM_REBUILD_CMD?= ${NPM_CMDNAME} rebuild
. elif ${_NODEJS_NPM} == yarn4
NPM_CACHE_SETUP_CMD?= ${SH} -c "${NPM_CMDNAME} config set enableGlobalCache false; \
${NPM_CMDNAME} config set cacheFolder \"./${NPM_MODULE_CACHE}\""
NPM_FETCH_FLAGS+= --immutable --mode=skip-build --silent
NPM_EXTRACT_SETUP_CMD?= ${SH} -c "${NPM_CMDNAME} config set enableNetwork false; \
${NPM_CMDNAME} config set enableInlineBuilds true"
NPM_EXTRACT_FLAGS+= ${NPM_FETCH_FLAGS} --immutable-cache
NPM_REBUILD_CMD?= ${NPM_CMDNAME} rebuild
. endif
. elif ${_NODEJS_NPM} == pnpm
NPM_LOCKFILE?= pnpm-lock.yaml
NPM_MODULE_CACHE?= node_modules
NPM_CMDNAME?= pnpm
NPM_CACHE_SETUP_CMD?= ${NPM_CMDNAME} set extendNodePath false
NPM_FETCH_CMD?= ${NPM_CMDNAME} install
NPM_FETCH_FLAGS+= --frozen-lockfile --ignore-scripts --loglevel=error
NPM_EXEC_CMD?= ${NPM_CMDNAME} exec
NPM_REBUILD_CMD?= ${NPM_CMDNAME} rebuild
. endif
# Define user-accessible variables
JQ_CMD?= ${LOCALBASE}/bin/jq
YQ_CMD?= ${LOCALBASE}/bin/yq
APP_BUILDER_CMD?= ${LOCALBASE}/bin/app-builder
ELECTRON_ARCH= ${ARCH:S/aarch64/arm64/:S/amd64/x64/:S/i386/ia32/}
PKGJSONSDIR?= ${FILESDIR}/packagejsons
NPM_VER?=
NPM_EXTRACT_WRKSRC?= ${WRKSRC}
NPM_REBUILD_WRKSRC_NODEJS?= ${WRKSRC}
NPM_REBUILD_WRKSRC_ELECTRON?= ${WRKSRC}
# Check existence of package.json
_EXISTS_NPM_PKGFILE?=
. if exists(${PKGJSONSDIR}/${NPM_PKGFILE})
_EXISTS_NPM_PKGFILE= 1
. endif
# If yarn 2+ or pnpm is used, we need to know the version of node package
# manager. It is usually specified as the key "packageManager", so try to
# automatically detect the version.
. if ${_NODEJS_NPM} == yarn2 || ${_NODEJS_NPM} == yarn4 || ${_NODEJS_NPM} == pnpm
. if ${_EXISTS_NPM_PKGFILE} == 1 && empty(NPM_VER)
NPM_VER!= ${GREP} packageManager ${PKGJSONSDIR}/${NPM_PKGFILE} | \
${AWK} -F ':' '{print $$NF}' | \
${SED} -e 's/[",]//g' | \
${CUT} -f 2 -d '@' | \
${CUT} -f 1 -d '+'
. endif
. if empty(NPM_VER)
IGNORE= does not specity version of ${NPM_CMDNAME} used for prefetching node modules
. endif
_USES_fetch+= 490:electron-fetch-node-package-manager
DISTFILES+= ${NPM_CMDNAME}-${NPM_VER}.tgz:prefetch
FETCH_DEPENDS+= ${_NODEJS_PKGNAME}>0:${_NODEJS_PORT}
electron-fetch-node-package-manager:
@${ECHO_MSG} "===> Fetching and setting up ${NPM_CMDNAME} version ${NPM_VER}"
@${MKDIR} ${DISTDIR}/${DIST_SUBDIR} ${WRKDIR}/.bin
@${SETENV} ${MAKE_ENV} corepack enable --install-directory ${WRKDIR}/.bin
@if [ ! -f ${DISTDIR}/${DIST_SUBDIR}/${NPM_CMDNAME}-${NPM_VER}.tgz ]; then \
cd ${WRKDIR} && \
${SETENV} ${MAKE_ENV} corepack pack ${NPM_CMDNAME}@${NPM_VER} && \
${TAR} -xzf corepack.tgz && \
${SETENV} SCRIPTSDIR=${SCRIPTSDIR} WRKDIR=${WRKDIR} \
${SH} ${SCRIPTSDIR}/electron-create-mtree.sh ${NPM_CMDNAME} > \
${NPM_CMDNAME}.mtree && \
${SETENV} LANG=en_US.UTF-8 LC_ALL=en_US.UTF-8 \
${TAR} -cz --options 'gzip:!timestamp' \
-f ${DISTDIR}/${DIST_SUBDIR}/${NPM_CMDNAME}-${NPM_VER}.tgz @${NPM_CMDNAME}.mtree; \
fi
@${SETENV} ${MAKE_ENV} corepack install -g ${DISTDIR}/${DIST_SUBDIR}/${NPM_CMDNAME}-${NPM_VER}.tgz
. endif
# When prefetch feature is used, downloads node modules the port uses according
# to the pre-stored package.json.
. if defined(_ELECTRON_FEATURE_PREFETCH)
. if empty(_EXISTS_NPM_PKGFILE)
IGNORE= does not store ${NPM_PKGFILE} in ${PKGJSONSDIR} for prefetching node modules
. endif
_USES_fetch+= 491:electron-fetch-node-modules \
492:electron-archive-node-modules
_DISTFILE_prefetch= ${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX}-${DISTVERSION}-node-modules${EXTRACT_SUFX}
DISTFILES+= ${_DISTFILE_prefetch}:prefetch
. if ${_NODEJS_NPM} == npm || ${_NODEJS_NPM} == yarn1
FETCH_DEPENDS+= ${_NPM_PKGNAME}>0:${_NPM_PORTDIR}
. elif ${_NODEJS_NPM} == pnpm
FETCH_DEPENDS+= ${YQ_CMD}:textproc/yq
. endif
electron-fetch-node-modules:
@${MKDIR} ${DISTDIR}/${DIST_SUBDIR}
@if [ ! -f ${DISTDIR}/${DIST_SUBDIR}/${_DISTFILE_prefetch} ]; then \
${ECHO_MSG} "===> Setting up node modules cache directory"; \
${MKDIR} ${WRKDIR}/node-modules-cache; \
${TAR} -cf - -C ${PKGJSONSDIR} . | ${TAR} -xf - -C ${WRKDIR}/node-modules-cache; \
cd ${WRKDIR}/node-modules-cache && ${SETENV} ${MAKE_ENV} ${NPM_CACHE_SETUP_CMD}; \
${ECHO_MSG} "===> Prefetching node modules"; \
for dir in `${FIND} ${WRKDIR}/node-modules-cache -type f -name ${NPM_LOCKFILE} -exec ${DIRNAME} {} ';'`; do \
cd $${dir} && \
${SETENV} ${MAKE_ENV} ${NPM_FETCH_CMD} ${NPM_FETCH_FLAGS}; \
${RM} $${dir}/${NPM_MODULE_CACHE}/.gitignore; \
if [ -f $${dir}/${NPM_MODULE_CACHE}/.modules.yaml ]; then \
${YQ_CMD} -yi 'del(.prunedAt, .storeDir)' \
$${dir}/${NPM_MODULE_CACHE}/.modules.yaml; \
fi; \
${RM} $${dir}/${NPM_MODULE_CACHE}/.pnpm-workspace-state*.json; \
done; \
fi
electron-archive-node-modules:
. if ${_NODEJS_NPM} == npm || ${_NODEJS_NPM} == pnpm
@if [ -d ${WRKDIR}/node-modules-cache ]; then \
${ECHO_MSG} "===> Archiving prefetched node modules"; \
for dir in `${FIND} -s ${WRKDIR}/node-modules-cache -type d -name ${NPM_MODULE_CACHE} -print | \
${GREP} -ve '${NPM_MODULE_CACHE}/.*/${NPM_MODULE_CACHE}'`; do \
${SETENV} SCRIPTSDIR=${SCRIPTSDIR} WRKDIR=${WRKDIR} \
${SH} ${SCRIPTSDIR}/electron-create-mtree.sh $${dir} >> \
${WRKDIR}/node-modules-cache.mtree; \
done; \
${SETENV} LANG=en_US.UTF-8 LC_ALL=en_US.UTF-8 \
${TAR} -cz --options 'gzip:!timestamp' \
-f ${DISTDIR}/${DIST_SUBDIR}/${_DISTFILE_prefetch} \
-C ${WRKDIR} @node-modules-cache.mtree; \
if [ ${TMPDIR} != ${WRKDIR} ]; then \
${RM} -r ${WRKDIR}; \
fi; \
fi
. elif ${_NODEJS_NPM:Myarn*}
@if [ -d ${WRKDIR}/node-modules-cache ]; then \
${ECHO_MSG} "===> Archiving prefetched node modules"; \
cd ${WRKDIR}/node-modules-cache && \
${SETENV} SCRIPTSDIR=${SCRIPTSDIR} WRKDIR=${WRKDIR} \
${SH} ${SCRIPTSDIR}/electron-create-mtree.sh ${NPM_MODULE_CACHE} > \
node-modules-cache.mtree && \
${SETENV} LANG=en_US.UTF-8 LC_ALL=en_US.UTF-8 \
${TAR} -cz --options 'gzip:!timestamp' \
-f ${DISTDIR}/${DIST_SUBDIR}/${_DISTFILE_prefetch} @node-modules-cache.mtree; \
if [ ${TMPDIR} != ${WRKDIR} ]; then \
${RM} -r ${WRKDIR}; \
fi; \
fi
. endif
. endif # _FEATURE_ELECTRON_PREFETCH
# When extract feature is used, installs the prefetched node modules into the
# port's working source directory.
. if defined(_ELECTRON_FEATURE_EXTRACT)
_USES_extract+= 600:electron-extract-node-package-manager \
601:electron-copy-package-file \
602:electron-install-node-modules
. if ${_NODEJS_NPM} == yarn1
EXTRACT_DEPENDS+= ${_NPM_PKGNAME}>0:${_NPM_PORTDIR}
. elif ${_NODEJS_NPM} == yarn2 || ${_NODEJS_NPM} == yarn4 || ${_NODEJS_NPM} == pnpm
EXTRACT_DEPENDS+= ${_NODEJS_PKGNAME}>0:${_NODEJS_PORT}
. endif
electron-extract-node-package-manager:
. if ${_NODEJS_NPM} == yarn2 || ${_NODEJS_NPM} == yarn4 || ${_NODEJS_NPM} == pnpm
@${ECHO_MSG} "===> Setting up ${NPM_CMDNAME} version ${NPM_VER}"
@${MKDIR} ${WRKDIR}/.bin
@${SETENV} ${MAKE_ENV} corepack enable --install-directory ${WRKDIR}/.bin
@${SETENV} ${MAKE_ENV} corepack install -g ${DISTDIR}/${DIST_SUBDIR}/${NPM_CMDNAME}-${NPM_VER}.tgz
. else
@${DO_NADA}
. endif
electron-copy-package-file:
. if ${_EXISTS_NPM_PKGFILE} == 1
@${ECHO_MSG} "===> Copying ${NPM_PKGFILE} and ${NPM_LOCKFILE} to ${NPM_EXTRACT_WRKSRC}"
@for f in `${FIND} ${PKGJSONSDIR} -type f \( -name ${NPM_PKGFILE} -o -name ${NPM_LOCKFILE} \) -print | ${SED} -e 's|${PKGJSONSDIR}/||'`; do \
${MKDIR} -p `${DIRNAME} ${NPM_EXTRACT_WRKSRC}/$${f}`; \
if [ -f ${NPM_EXTRACT_WRKSRC}/$${f} ]; then \
${MV} -f ${NPM_EXTRACT_WRKSRC}/$${f} ${NPM_EXTRACT_WRKSRC}/$${f}.bak; \
fi; \
${CP} ${PKGJSONSDIR}/$${f} ${NPM_EXTRACT_WRKSRC}/$${f}; \
done
. endif
electron-install-node-modules:
. if ${_NODEJS_NPM} == npm || ${_NODEJS_NPM} == pnpm
@${ECHO_MSG} "===> Moving prefetched node modules to ${NPM_EXTRACT_WRKSRC}"
@if [ -d ${EXTRACT_WRKDIR}/node-modules-cache ]; then \
for dir in `${FIND} -s ${EXTRACT_WRKDIR}/node-modules-cache -type d -name ${NPM_MODULE_CACHE} -print | \
${GREP} -ve '${NPM_MODULE_CACHE}/.*/${NPM_MODULE_CACHE}'`; do \
${MV} $${dir} `${ECHO_CMD} $${dir} | sed -e 's|${EXTRACT_WRKDIR}/node-modules-cache|${NPM_EXTRACT_WRKSRC}|'`; \
done; \
fi
. elif ${_NODEJS_NPM:Myarn*}
@${ECHO_MSG} "===> Installing node modules from prefetched cache"
@if [ -d ${EXTRACT_WRKDIR}/${NPM_MODULE_CACHE} ]; then \
${MV} ${EXTRACT_WRKDIR}/${NPM_MODULE_CACHE} ${NPM_EXTRACT_WRKSRC}; \
fi
@cd ${NPM_EXTRACT_WRKSRC} && ${SETENV} ${MAKE_ENV} ${NPM_CACHE_SETUP_CMD}
. if defined(NPM_EXTRACT_SETUP_CMD) && !empty(NPM_EXTRACT_SETUP_CMD)
@${ECHO_MSG} "===> Setting up ${NPM_CMDNAME} command options"
@cd ${NPM_EXTRACT_WRKSRC} && ${SETENV} ${MAKE_ENV} ${NPM_EXTRACT_SETUP_CMD}
. endif
@if [ -d ${PKGJSONSDIR} ]; then \
cd ${PKGJSONSDIR} && \
for dir in `${FIND} . -type f -name ${NPM_LOCKFILE} -exec ${DIRNAME} {} ';'`; do \
cd ${NPM_EXTRACT_WRKSRC}/$${dir} && \
${SETENV} ${MAKE_ENV} ${NPM_EXTRACT_CMD} ${NPM_EXTRACT_FLAGS}; \
done; \
else \
cd ${NPM_EXTRACT_WRKSRC} && \
${SETENV} ${MAKE_ENV} ${NPM_EXTRACT_CMD} ${NPM_EXTRACT_FLAGS}; \
fi
. endif
. endif # _ELECTRON_FEATURE_EXTRACT
# Always generate distribution zip files from installed electron package
# directory. This is necessary to prevent the build phase from downloading
# binary distribution files from GitHub.
_USES_build+= 290:electron-generate-electron-zip
BUILD_DEPENDS+= zip:archivers/zip
. if ${_NODEJS_NPM} == npm
BUILD_DEPENDS+= ${JQ_CMD}:textproc/jq
. elif ${_NODEJS_NPM} == yarn2 || ${_NODEJS_NPM} == yarn4 || ${_NODEJS_NPM} == pnpm
BUILD_DEPENDS+= ${YQ_CMD}:textproc/yq
. endif
. if !defined(UPSTREAM_ELECTRON_VER)
. if ${_EXISTS_NPM_PKGFILE} == 1
. if ${_NODEJS_NPM} == npm && exists(${JQ_CMD})
UPSTREAM_ELECTRON_VER!= ${JQ_CMD} -r \
'.packages | \
to_entries | \
map(if(.key | test("electron$$")) then .value.version else empty end) | \
.[]' ${PKGJSONSDIR}/${NPM_LOCKFILE} | \
${SORT} -n | \
${TAIL} -n 1
. elif ${_NODEJS_NPM} == yarn1
UPSTREAM_ELECTRON_VER!= ${GREP} -e 'resolved.*/electron/' ${PKGJSONSDIR}/${NPM_LOCKFILE} | \
${AWK} -F- '{print $$NF}' | \
${SED} -E 's/\.[a-z]+.*$$//' | \
${SORT} -n | \
${TAIL} -n 1
. elif (${_NODEJS_NPM} == yarn2 || ${_NODEJS_NPM} == yarn4) && exists(${YQ_CMD})
UPSTREAM_ELECTRON_VER!= ${YQ_CMD} -r \
'. | \
to_entries | \
map(if(.key | test("^electron@")) then .value.version else empty end) | \
.[]' ${PKGJSONSDIR}/${NPM_LOCKFILE} | \
${SORT} -n | \
${TAIL} -n 1
. elif ${_NODEJS_NPM} == pnpm && exists(${YQ_CMD})
UPSTREAM_ELECTRON_VER!= ${YQ_CMD} -r \
'.packages | \
to_entries | \
map(if(.key | test("^electron@")) then .key else empty end) | \
.[]' ${PKGJSONSDIR}/${NPM_LOCKFILE} | \
${CUT} -f 2 -d '@' | \
${SORT} -n | \
${TAIL} -n 1
. endif
. endif
. endif
ELECTRON_DOWNLOAD_URL= ${_ELECTRON_DOWNLOAD_URL_BASE}/v${UPSTREAM_ELECTRON_VER}
ELECTRON_DOWNLOAD_URL_HASH!= ${SHA256} -q -s ${ELECTRON_DOWNLOAD_URL}
ELECTRON_DOWNLOAD_CACHE_DIR= .cache/electron/${ELECTRON_DOWNLOAD_URL_HASH}
. if !defined(UPSTREAM_CHROMEDRIVER_VER)
. if ${_EXISTS_NPM_PKGFILE} == 1
UPSTREAM_CHROMEDRIVER_VER!= ${GREP} -e 'resolved.*/electron-chromedriver/' ${PKGJSONSDIR}/${NPM_LOCKFILE} | \
${HEAD} -n 1 | ${AWK} -F- '{print $$NF}' | ${SED} -E 's/\.[a-z]+.*$$//'
. endif
. endif
CHROMEDRIVER_DOWNLOAD_URL= ${_ELECTRON_DOWNLOAD_URL_BASE}/v${UPSTREAM_CHROMEDRIVER_VER}
CHROMEDRIVER_DOWNLOAD_URL_HASH!=${SHA256} -q -s ${CHROMEDRIVER_DOWNLOAD_URL}
CHROMEDRIVER_DOWNLOAD_CACHE_DIR=.cache/electron/${CHROMEDRIVER_DOWNLOAD_URL_HASH}
. if !defined(UPSTREAM_MKSNAPSHOT_VER)
. if ${_EXISTS_NPM_PKGFILE} == 1
UPSTREAM_MKSNAPSHOT_VER!= ${GREP} -e 'resolved.*/electron-mksnapshot/' ${PKGJSONSDIR}/${NPM_LOCKFILE} | \
${HEAD} -n 1 | ${AWK} -F- '{print $$NF}' | ${SED} -E 's/\.[a-z]+.*$$//'
. endif
. endif
MKSNAPSHOT_DOWNLOAD_URL= ${_ELECTRON_DOWNLOAD_URL_BASE}/v${UPSTREAM_MKSNAPSHOT_VER}
MKSNAPSHOT_DOWNLOAD_URL_HASH!= ${SHA256} -q -s ${MKSNAPSHOT_DOWNLOAD_URL}
MKSNAPSHOT_DOWNLOAD_CACHE_DIR= .cache/electron/${MKSNAPSHOT_DOWNLOAD_URL_HASH}
electron-generate-electron-zip:
@if [ -d ${LOCALBASE}/share/electron${ELECTRON_VER_MAJOR} ]; then \
${ECHO_MSG} "===> Preparing distribution files of electron/chromedriver/mksnapshot"; \
${RM} -r ${WRKDIR}/electron-dist; \
${MKDIR} ${WRKDIR}/electron-dist; \
${TAR} -cf - -C ${LOCALBASE}/share/electron${ELECTRON_VER_MAJOR} . | \
${TAR} -xf - -C ${WRKDIR}/electron-dist; \
cd ${WRKDIR}/electron-dist && \
${FIND} . -type f -perm ${BINMODE} -exec ${CHMOD} 755 {} ';'; \
${MKDIR} ${WRKDIR}/${ELECTRON_DOWNLOAD_CACHE_DIR}; \
cd ${WRKDIR}/electron-dist && \
zip -q -r ${WRKDIR}/${ELECTRON_DOWNLOAD_CACHE_DIR}/electron-v${UPSTREAM_ELECTRON_VER}-linux-${ELECTRON_ARCH}.zip .; \
cd ${WRKDIR}/${ELECTRON_DOWNLOAD_CACHE_DIR} && \
${SHA256} -r *.zip | \
${SED} -e 's/ / */' > SHASUMS256.txt-${UPSTREAM_ELECTRON_VER}; \
cd ${WRKDIR}/${ELECTRON_DOWNLOAD_CACHE_DIR} && \
${SHA256} -r *.zip | \
${SED} -e 's/ / */' > SHASUMS256.txt; \
fi
. if defined(UPSTREAM_CHROMEDRIVER_VER) && !empty(UPSTREAM_CHROMEDRIVER_VER)
@if [ -d ${LOCALBASE}/share/electron${ELECTRON_VER_MAJOR} ]; then \
${MKDIR} ${WRKDIR}/${CHROMEDRIVER_DOWNLOAD_CACHE_DIR}; \
cd ${WRKDIR}/electron-dist && \
zip -q -r ${WRKDIR}/${CHROMEDRIVER_DOWNLOAD_CACHE_DIR}/chromedriver-v${UPSTREAM_CHROMEDRIVER_VER}-freebsd-${ELECTRON_ARCH}.zip .; \
cd ${WRKDIR}/${CHROMEDRIVER_DOWNLOAD_CACHE_DIR} && \
${SHA256} -r *.zip | \
${SED} -e 's/ / */' > SHASUMS256.txt-${UPSTREAM_CHROMEDRIVER_VER}; \
cd ${WRKDIR}/${CHROMEDRIVER_DOWNLOAD_CACHE_DIR} && \
${SHA256} -r *.zip | \
${SED} -e 's/ / */' > SHASUMS256.txt; \
fi
. endif
. if defined(UPSTREAM_MKSNAPSHOT_VER) && !empty(UPSTREAM_MKSNAPSHOT_VER)
@if [ -d ${LOCALBASE}/share/electron${ELECTRON_VER_MAJOR} ]; then \
${MKDIR} ${WRKDIR}/${MKSNAPSHOT_DOWNLOAD_CACHE_DIR}; \
cd ${WRKDIR}/electron-dist && \
zip -q -r ${WRKDIR}/${MKSNAPSHOT_DOWNLOAD_CACHE_DIR}/mksnapshot-v${UPSTREAM_MKSNAPSHOT_VER}-freebsd-${ELECTRON_ARCH}.zip .; \
cd ${WRKDIR}/${MKSNAPSHOT_DOWNLOAD_CACHE_DIR} && \
${SHA256} -r *.zip | \
${SED} -e 's/ / */' > SHASUMS256.txt-${UPSTREAM_MKSNAPSHOT_VER}; \
cd ${WRKDIR}/${MKSNAPSHOT_DOWNLOAD_CACHE_DIR} && \
${SHA256} -r *.zip | \
${SED} -e 's/ / */' > SHASUMS256.txt; \
fi
. endif
# When rebuild feature is used, rebuilds native node modules against nodejs or
# electron.
. if defined(_ELECTRON_FEATURE_REBUILD)
_USES_build+= 291:electron-rebuild-native-node-modules-for-node \
490:electron-rebuild-native-node-modules-for-electron
. if ${_NODEJS_NPM} == npm || ${_NODEJS_NPM} == yarn1
BUILD_DEPENDS+= ${_NPM_PKGNAME}>0:${_NPM_PORTDIR}
. elif ${_NODEJS_NPM} == yarn2 || ${_NODEJS_NPM} == yarn4 || ${_NODEJS_NPM} == pnpm
BUILD_DEPENDS+= ${_NODEJS_PKGNAME}>0:${_NODEJS_PORT}
. endif
. if ${_NODEJS_NPM} == yarn1
# jq is needed for detecting native node modules needing build
BUILD_DEPENDS+= ${JQ_CMD}:textproc/jq
# npm is needed for executing "npm rebuild" command
BUILD_DEPENDS+= npm${NODEJS_SUFFIX}>0:www/npm${NODEJS_SUFFIX}
. endif
electron-rebuild-native-node-modules-for-node:
. if defined(_ELECTRON_FEATURE_REBUILD_NODEJS) && \
${_ELECTRON_FEATURE_REBUILD_NODEJS} == yes
@${ECHO_MSG} "===> Rebuilding native node modules for nodejs"
. if ${_NODEJS_NPM} == yarn1
@cd ${NPM_REBUILD_WRKSRC_NODEJS} && \
${SETENV} ${MAKE_ENV} ${NODEJS_REBUILD_ENV} npm rebuild
. else
@cd ${NPM_REBUILD_WRKSRC_NODEJS} && \
${SETENV} ${MAKE_ENV} ${NODEJS_REBUILD_ENV} ${NPM_CMDNAME} rebuild
. endif
. else
@${DO_NADA}
. endif
electron-rebuild-native-node-modules-for-electron:
. if defined(_ELECTRON_FEATURE_REBUILD_ELECTRON) && \
${_ELECTRON_FEATURE_REBUILD_ELECTRON} == yes
. if ${_NODEJS_NPM} == pnpm
@for dir in `${APP_BUILDER_CMD} node-dep-tree --dir ${NPM_REBUILD_WRKSRC_ELECTRON} | ${JQ_CMD} -r '.[] | { dir: .dir, name: .deps[].name } | .dir + "/" + .name'`; do \
for subdir in `${FIND} $${dir} -type f -name binding.gyp -exec ${DIRNAME} {} ';' 2> /dev/null`; do \
cd $${subdir} && \
${ECHO_MSG} "===> Rebuilding native node modules for electron in $${subdir}" && \
${SETENV} ${MAKE_ENV} ${ELECTRON_REBUILD_ENV} ${NPM_REBUILD_CMD} ${NPM_REBUILD_FLAGS}; \
done \
done
. else
@for dir in `${APP_BUILDER_CMD} node-dep-tree --dir ${NPM_REBUILD_WRKSRC_ELECTRON} | ${JQ_CMD} -r '.[] | { dir: .dir, name: .deps[].name } | .dir + "/" + .name'`; do \
for subdir in `${FIND} $${dir} -type f -name binding.gyp -exec ${DIRNAME} {} ';' 2> /dev/null`; do \
cd $${subdir} && \
${ECHO_MSG} "===> Rebuilding native node modules for electron in $${subdir}" && \
${SETENV} ${MAKE_ENV} ${ELECTRON_REBUILD_ENV} ${NPM_EXEC_CMD} ${NPM_EXEC_FLAGS} node-gyp rebuild; \
done \
done
. endif
. else
@${DO_NADA}
. endif
. endif # _ELECTRON_FEATURE_REBUILD
_USES_build+= 499:clean-up-backup-files
clean-up-backup-files:
@${ECHO_MSG} "===> Cleaning up backup files in ${WRKSRC}"
@${FIND} ${WRKSRC} -type f \( -name '*.bak' -o -name '*.orig' \) -delete
# When build feature is used, prepares an electron application in a
# distributable format using the specified package builder.
. if defined(_ELECTRON_FEATURE_BUILD)
ELECTRON_MAKE_FLAGS?=
. if ${_ELECTRON_FEATURE_BUILD} == builder
ELECTRON_MAKE_CMD?= ${NPM_EXEC_CMD} ${NPM_EXEC_FLAGS} electron-builder
ELECTRON_MAKE_FLAGS+= --linux \
--dir \
--publish never \
--config.npmRebuild=false \
--config.electronVersion=${ELECTRON_VER} \
--config.electronDist=${WRKDIR}/electron-dist
DO_MAKE_BUILD= ${SETENV} ${MAKE_ENV} ${ELECTRON_MAKE_CMD} ${ELECTRON_MAKE_FLAGS}
ELECTRON_BUILDER_APP_OUT_DIR= linux-${ARCH:S/aarch64/arm64-/:S/amd64//:S/i386/ia32-/}unpacked
. elif ${_ELECTRON_FEATURE_BUILD} == packager
ELECTRON_MAKE_CMD?= ${NPM_EXEC_CMD} ${NPM_EXEC_FLAGS} electron-packager
ELECTRON_MAKE_FLAGS+= --platform=linux \
--no-download \
--electron-version=${ELECTRON_VER} \
--electron-zip-dir=${WRKDIR}/${ELECTRON_DOWNLOAD_CACHE_DIR} \
--prune \
--overwrite
DO_MAKE_BUILD= ${SETENV} ${MAKE_ENV} ${ELECTRON_MAKE_CMD} . ${ELECTRON_MAKE_FLAGS}
. elif ${_ELECTRON_FEATURE_BUILD} == forge
ELECTRON_MAKE_CMD?= ${NPM_EXEC_CMD} ${NPM_EXEC_FLAGS} electron-forge package
ELECTRON_MAKE_FLAGS+= --platform=linux
DO_MAKE_BUILD= ${SETENV} ${MAKE_ENV} ${ELECTRON_MAKE_CMD} ${ELECTRON_MAKE_FLAGS}
. endif
. if ${_NODEJS_NPM} == npm || ${_NODEJS_NPM} == yarn1
ELECTRON_MAKE_CMD+= --
. endif
ALL_TARGET= # empty
. endif
NODEJS_REBUILD_ENV+= npm_config_nodedir=${LOCALBASE}
ELECTRON_REBUILD_ENV+= npm_config_runtime=electron
ELECTRON_REBUILD_ENV+= npm_config_target=${ELECTRON_VER}
ELECTRON_REBUILD_ENV+= npm_config_nodedir=${LOCALBASE}/share/electron${ELECTRON_VER_MAJOR}/node_headers
MAKE_ENV+= ELECTRON_OVERRIDE_DIST_PATH=${WRKDIR}/electron-dist
MAKE_ENV+= ELECTRON_SKIP_BINARY_DOWNLOAD=1 # don't download electron binary distribution
MAKE_ENV+= PLAYWRIGHT_SKIP_BROWSER_DOWNLOAD=1 # don't download browser for playwright
MAKE_ENV+= PUPPETEER_SKIP_CHROMIUM_DOWNLOAD=1 # don't download chromium for puppeteer
MAKE_ENV+= SASS_FORCE_BUILD=true # always rebuild native node-sass module
MAKE_ENV+= USE_SYSTEM_APP_BUILDER=true # always use system app-builder for electron-builder
MAKE_ENV+= npm_config_build_from_source=true
SUB_LIST+= ELECTRON_VER_MAJOR=${ELECTRON_VER_MAJOR}
.endif # _INCLUDE_USES_ELECTRON_MK
