pkg-message

[
{ type: install
  message: <<EOM

!!! ATTENTION !!!

Make sure that you are flashing proper F/W.
There is different pinout in different images and you may loose
connection to EFR32 chip after flashing.


Extra F/W sources:
https://www.zigbee2mqtt.io/guide/adapters/
https://github.com/xsp1989/zigbeeFirmware/
https://github.com/grobasoz/zigbee-firmware
https://github.com/zha-ng/EZSP-Firmware
https://github.com/MattWestb/EFR32-FW
https://github.com/walthowd/husbzb-firmware


Please note if you are using the EZSP v8 firmware you will also have to
add the following to your configuration.yaml for the Home Assistant
ZHA integration to load successfully.

zha:
  zigpy_config:
    ezsp_config:
      CONFIG_PACKET_BUFFER_COUNT: 64
      CONFIG_MAX_END_DEVICE_CHILDREN: 32
      CONFIG_SOURCE_ROUTE_TABLE_SIZE: 200

EOM
}
]