Path: blob/main/sys/contrib/device-tree/src/arm64/ti/k3-am62d2-evm.dts
96361 views
// SPDX-License-Identifier: GPL-2.0-only OR MIT
/*
* AM62D2 EVM: https://www.ti.com/lit/zip/sprcal5
*
* Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
*/
/dts-v1/;
#include <dt-bindings/leds/common.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/net/ti-dp83867.h>
#include "k3-am62d2.dtsi"
/ {
compatible = "ti,am62d2-evm", "ti,am62d2";
model = "Texas Instruments AM62D2 EVM";
aliases {
serial0 = &wkup_uart0;
serial1 = &mcu_uart0;
serial2 = &main_uart0;
mmc0 = &sdhci0;
mmc1 = &sdhci1;
rtc0 = &wkup_rtc0;
ethernet0 = &cpsw_port1;
ethernet1 = &cpsw_port2;
};
chosen {
stdout-path = &main_uart0;
};
memory@80000000 {
device_type = "memory";
/* 4G RAM */
reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
<0x00000008 0x80000000 0x00000000 0x80000000>;
bootph-all;
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
/* global cma region */
linux,cma {
compatible = "shared-dma-pool";
reusable;
size = <0x00 0x2000000>;
alloc-ranges = <0x00 0xc0000000 0x00 0x2000000>;
linux,cma-default;
};
secure_tfa_ddr: tfa@80000000 {
reg = <0x00 0x80000000 0x00 0x80000>;
no-map;
};
c7x_0_dma_memory_region: c7x-dma-memory@99800000 {
compatible = "shared-dma-pool";
reg = <0x00 0x99800000 0x00 0x100000>;
no-map;
};
c7x_0_memory_region: c7x-memory@99900000 {
compatible = "shared-dma-pool";
reg = <0x00 0x99900000 0x00 0xf00000>;
no-map;
};
mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@9b800000 {
compatible = "shared-dma-pool";
reg = <0x00 0x9b800000 0x00 0x100000>;
no-map;
};
mcu_r5fss0_core0_memory_region: r5f-dma-memory@9b900000 {
compatible = "shared-dma-pool";
reg = <0x00 0x9b900000 0x00 0xf00000>;
no-map;
};
wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 {
compatible = "shared-dma-pool";
reg = <0x00 0x9c800000 0x00 0x100000>;
no-map;
};
wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
compatible = "shared-dma-pool";
reg = <0x00 0x9c900000 0x00 0xf00000>;
no-map;
bootph-pre-ram;
};
secure_ddr: optee@9e800000 {
reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
no-map;
};
rtos_ipc_memory_region: ipc-memories@a0000000 {
compatible = "shared-dma-pool";
reg = <0x00 0xa0000000 0x00 0x01000000>;
no-map;
};
};
opp-table {
/* Requires VDD_CORE at 0v85 */
opp-1400000000 {
opp-hz = /bits/ 64 <1400000000>;
opp-supported-hw = <0x01 0x0004>;
clock-latency-ns = <6000000>;
};
};
vout_pd: regulator-0 {
/* TPS65988 PD CONTROLLER OUTPUT */
compatible = "regulator-fixed";
regulator-name = "vout_pd";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
bootph-all;
};
vmain_pd: regulator-1 {
/* Output of TPS22811 */
compatible = "regulator-fixed";
regulator-name = "vmain_pd";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vout_pd>;
regulator-always-on;
regulator-boot-on;
bootph-all;
};
vcc_5v0: regulator-2 {
/* Output of TPS630702RNMR */
compatible = "regulator-fixed";
regulator-name = "vcc_5v0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vmain_pd>;
regulator-always-on;
regulator-boot-on;
bootph-all;
};
vcc_3v3_main: regulator-3 {
/* output of LM5141-Q1 */
compatible = "regulator-fixed";
regulator-name = "vcc_3v3_main";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vmain_pd>;
regulator-always-on;
regulator-boot-on;
bootph-all;
};
vdd_mmc1: regulator-4 {
/* TPS22918DBVR */
compatible = "regulator-fixed";
regulator-name = "vdd_mmc1";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
enable-active-high;
gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
bootph-all;
};
vcc_3v3_sys: regulator-5 {
/* output of TPS222965DSGT */
compatible = "regulator-fixed";
regulator-name = "vcc_3v3_sys";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc_3v3_main>;
regulator-always-on;
regulator-boot-on;
bootph-all;
};
vddshv_sdio: regulator-6 {
compatible = "regulator-gpio";
regulator-name = "vddshv_sdio";
pinctrl-names = "default";
pinctrl-0 = <&vddshv_sdio_pins_default>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
gpios = <&main_gpio1 31 GPIO_ACTIVE_HIGH>;
states = <1800000 0x0>,
<3300000 0x1>;
bootph-all;
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&usr_led_pins_default>;
led-0 {
label = "am62d-evm:green:heartbeat";
gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
function = LED_FUNCTION_HEARTBEAT;
default-state = "off";
};
};
};
&mcu_pmx0 {
status = "okay";
pmic_irq_pins_default: pmic-irq-default-pins {
pinctrl-single,pins = <
AM62DX_MCU_IOPAD(0x000, PIN_INPUT, 7) /* (E11) MCU_GPIO0_0 */
>;
};
wkup_uart0_pins_default: wkup-uart0-default-pins {
pinctrl-single,pins = <
AM62DX_MCU_IOPAD(0x0024, PIN_INPUT, 0) /* (C9) WKUP_UART0_RXD */
AM62DX_MCU_IOPAD(0x0028, PIN_OUTPUT, 0) /* (E9) WKUP_UART0_TXD */
AM62DX_MCU_IOPAD(0x002c, PIN_INPUT, 0) /* (C10) WKUP_UART0_CTSn */
AM62DX_MCU_IOPAD(0x0030, PIN_OUTPUT, 0) /* (C8) WKUP_UART0_RTSn */
>;
bootph-all;
};
};
/* WKUP UART0 is used for DM firmware logs */
&wkup_uart0 {
pinctrl-names = "default";
pinctrl-0 = <&wkup_uart0_pins_default>;
bootph-all;
status = "reserved";
};
&main_pmx0 {
main_uart0_pins_default: main-uart0-default-pins {
pinctrl-single,pins = <
AM62DX_IOPAD(0x01c8, PIN_INPUT, 0) /* (E14) UART0_RXD */
AM62DX_IOPAD(0x01cc, PIN_OUTPUT, 0) /* (D15) UART0_TXD */
>;
bootph-all;
};
main_i2c0_pins_default: main-i2c0-default-pins {
pinctrl-single,pins = <
AM62DX_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (D17) I2C0_SCL */
AM62DX_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (E16) I2C0_SDA */
>;
bootph-all;
};
main_i2c1_pins_default: main-i2c1-default-pins {
pinctrl-single,pins = <
AM62DX_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (C17) I2C1_SCL */
AM62DX_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (E17) I2C1_SDA */
>;
bootph-all;
};
main_i2c2_pins_default: main-i2c2-default-pins {
pinctrl-single,pins = <
AM62DX_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (M22) GPMC0_CSn2.I2C2_SCL */
AM62DX_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (M20) GPMC0_CSn3.I2C2_SDA */
>;
};
main_mmc0_pins_default: main-mmc0-default-pins {
pinctrl-single,pins = <
AM62DX_IOPAD(0x0220, PIN_INPUT_PULLUP, 0) /* (Y6) MMC0_CMD */
AM62DX_IOPAD(0x0218, PIN_OUTPUT, 0) /* (AB7) MMC0_CLK */
AM62DX_IOPAD(0x0214, PIN_INPUT_PULLUP, 0) /* (AA6) MMC0_DAT0 */
AM62DX_IOPAD(0x0210, PIN_INPUT_PULLUP, 0) /* (AB6) MMC0_DAT1 */
AM62DX_IOPAD(0x020c, PIN_INPUT_PULLUP, 0) /* (Y7) MMC0_DAT2 */
AM62DX_IOPAD(0x0208, PIN_INPUT_PULLUP, 0) /* (AA7) MMC0_DAT3 */
AM62DX_IOPAD(0x0204, PIN_INPUT_PULLUP, 0) /* (Y8) MMC0_DAT4 */
AM62DX_IOPAD(0x0200, PIN_INPUT_PULLUP, 0) /* (W7) MMC0_DAT5 */
AM62DX_IOPAD(0x01fc, PIN_INPUT_PULLUP, 0) /* (W9) MMC0_DAT6 */
AM62DX_IOPAD(0x01f8, PIN_INPUT_PULLUP, 0) /* (AB8) MMC0_DAT7 */
>;
bootph-all;
};
main_mmc1_pins_default: main-mmc1-default-pins {
pinctrl-single,pins = <
AM62DX_IOPAD(0x023c, PIN_INPUT, 0) /* (C21) MMC1_CMD */
AM62DX_IOPAD(0x0234, PIN_OUTPUT, 0) /* (E22) MMC1_CLK */
AM62DX_IOPAD(0x0230, PIN_INPUT, 0) /* (B22) MMC1_DAT0 */
AM62DX_IOPAD(0x022c, PIN_INPUT, 0) /* (D21) MMC1_DAT1 */
AM62DX_IOPAD(0x0228, PIN_INPUT, 0) /* (C22) MMC1_DAT2 */
AM62DX_IOPAD(0x0224, PIN_INPUT, 0) /* (D22) MMC1_DAT3 */
AM62DX_IOPAD(0x0240, PIN_INPUT, 0) /* (E18) MMC1_SDCD */
>;
bootph-all;
};
main_mdio0_pins_default: main-mdio0-default-pins {
pinctrl-single,pins = <
AM62DX_IOPAD(0x160, PIN_OUTPUT, 0) /* (V12) MDIO0_MDC */
AM62DX_IOPAD(0x15c, PIN_INPUT, 0) /* (V13) MDIO0_MDIO */
>;
bootph-all;
};
main_rgmii1_pins_default: main-rgmii1-default-pins {
pinctrl-single,pins = <
AM62DX_IOPAD(0x14c, PIN_INPUT, 0) /* (AB16) RGMII1_RD0 */
AM62DX_IOPAD(0x150, PIN_INPUT, 0) /* (V15) RGMII1_RD1 */
AM62DX_IOPAD(0x154, PIN_INPUT, 0) /* (W15) RGMII1_RD2 */
AM62DX_IOPAD(0x158, PIN_INPUT, 0) /* (V14) RGMII1_RD3 */
AM62DX_IOPAD(0x148, PIN_INPUT, 0) /* (AA16) RGMII1_RXC */
AM62DX_IOPAD(0x144, PIN_INPUT, 0) /* (AA15) RGMII1_RX_CTL */
AM62DX_IOPAD(0x134, PIN_INPUT, 0) /* (Y17) RGMII1_TD0 */
AM62DX_IOPAD(0x138, PIN_INPUT, 0) /* (V16) RGMII1_TD1 */
AM62DX_IOPAD(0x13c, PIN_INPUT, 0) /* (Y16) RGMII1_TD2 */
AM62DX_IOPAD(0x140, PIN_INPUT, 0) /* (AA17) RGMII1_TD3 */
AM62DX_IOPAD(0x0130, PIN_OUTPUT, 0) /* (AB17) RGMII1_TXC */
AM62DX_IOPAD(0x012c, PIN_OUTPUT, 0) /* (W16) RGMII1_TX_CTL */
>;
bootph-all;
};
main_rgmii2_pins_default: main-rgmii2-default-pins {
pinctrl-single,pins = <
AM62DX_IOPAD(0x0184, PIN_INPUT, 0) /* (AA21) RGMII2_RD0 */
AM62DX_IOPAD(0x0188, PIN_INPUT, 0) /* (Y20) RGMII2_RD1 */
AM62DX_IOPAD(0x018c, PIN_INPUT, 0) /* (AB21) RGMII2_RD2 */
AM62DX_IOPAD(0x0190, PIN_INPUT, 0) /* (AB20) RGMII2_RD3 */
AM62DX_IOPAD(0x0180, PIN_INPUT, 0) /* (AA20) RGMII2_RXC */
AM62DX_IOPAD(0x017c, PIN_INPUT, 0) /* (W18) RGMII2_RX_CTL */
AM62DX_IOPAD(0x016c, PIN_INPUT, 0) /* (AA19) RGMII2_TD0 */
AM62DX_IOPAD(0x0170, PIN_INPUT, 0) /* (Y18) RGMII2_TD1 */
AM62DX_IOPAD(0x0174, PIN_INPUT, 0) /* (AA18) RGMII2_TD2 */
AM62DX_IOPAD(0x0178, PIN_INPUT, 0) /* (W17) RGMII2_TD3 */
AM62DX_IOPAD(0x0168, PIN_OUTPUT, 0) /* (AB19) RGMII2_TXC */
AM62DX_IOPAD(0x0164, PIN_OUTPUT, 0) /* (Y19) RGMII2_TX_CTL */
>;
bootph-all;
};
main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins {
pinctrl-single,pins = <
AM62DX_IOPAD(0x01d4, PIN_INPUT, 7) /* (C15) UART0_RTSn.GPIO1_23 */
>;
};
vddshv_sdio_pins_default: vddshv-sdio-default-pins {
pinctrl-single,pins = <
AM62DX_IOPAD(0x1f4, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO1_31 */
>;
bootph-all;
};
usr_led_pins_default: usr-led-default-pins {
pinctrl-single,pins = <
AM62DX_IOPAD(0x0244, PIN_INPUT, 7) /* (D18) MMC1_SDWP.GPIO1_49 */
>;
};
};
&mcu_gpio0 {
status = "okay";
};
&main_i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&main_i2c0_pins_default>;
clock-frequency = <400000>;
bootph-all;
status = "okay";
typec_pd0: usb-power-controller@3f {
compatible = "ti,tps6598x";
reg = <0x3f>;
connector {
compatible = "usb-c-connector";
label = "USB-C";
self-powered;
data-role = "dual";
power-role = "sink";
port {
usb_con_hs: endpoint {
remote-endpoint = <&usb0_hs_ep>;
};
};
};
};
exp1: gpio@22 {
compatible = "ti,tca6424";
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&main_gpio1>;
interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
bootph-all;
gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
"","MMC1_SD_EN",
"VPP_EN", "GPIO_DIX_RST",
"IO_EXP_OPT_EN", "DIX_INT",
"GPIO_eMMC_RSTn", "CPLD2_DONE",
"CPLD2_INTN", "CPLD1_DONE",
"CPLD1_INTN", "USB_TYPEA_OC_INDICATION",
"PCM1_INT", "PCM2_INT",
"GPIO_PCM1_RST", "TEST_GPIO2",
"GPIO_PCM2_RST", "",
"IO_MCAN0_STB", "IO_MCAN1_STB",
"PD_I2C_IRQ", "IO_EXP_TEST_LED";
};
exp2: gpio@20 {
compatible = "ti,tca6416";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
gpio-line-names = "PCM6240_BUF_IO_EN", "",
"CPLD1_JTAGENB", "CPLD1_PROGRAMN",
"CPLD2_JTAGENB", "CPLD2_PROGRAMN",
"", "",
"", "CPLD1_TCK",
"CPLD1_TMS", "CPLD1_TDI",
"CPLD1_TDO", "CPLD2_TCK",
"CPLD2_TMS", "CPLD2_TDI",
"CPLD2_TDO", "ADDR1_IO_EXP",
"SoC_I2C0_SCL", "SoC_I2C0_SDA";
};
};
&main_i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&main_i2c1_pins_default>;
clock-frequency = <100000>;
status = "okay";
};
&main_i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&main_i2c2_pins_default>;
clock-frequency = <400000>;
status = "okay";
};
&sdhci0 {
/* eMMC */
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&main_mmc0_pins_default>;
bootph-all;
status = "okay";
};
&sdhci1 {
/* SD/MMC */
vmmc-supply = <&vdd_mmc1>;
vqmmc-supply = <&vddshv_sdio>;
pinctrl-names = "default";
pinctrl-0 = <&main_mmc1_pins_default>;
disable-wp;
bootph-all;
status = "okay";
};
&main_gpio0 {
bootph-all;
status = "okay";
};
&main_gpio1 {
bootph-all;
status = "okay";
};
&main_gpio_intr {
status = "okay";
};
&main_uart0 {
pinctrl-names = "default";
pinctrl-0 = <&main_uart0_pins_default>;
bootph-all;
status = "okay";
};
&usb0 {
usb-role-switch;
port {
usb0_hs_ep: endpoint {
remote-endpoint = <&usb_con_hs>;
};
};
};
&cpsw3g {
pinctrl-names = "default";
pinctrl-0 = <&main_rgmii1_pins_default>,
<&main_rgmii2_pins_default>;
status = "okay";
cpts@3d000 {
/* MAP HW3_TS_PUSH to GENF1 */
ti,pps = <2 1>;
};
};
&cpsw_port1 {
phy-mode = "rgmii-id";
phy-handle = <&cpsw3g_phy0>;
status = "okay";
};
&cpsw_port2 {
phy-mode = "rgmii-id";
phy-handle = <&cpsw3g_phy1>;
status = "okay";
};
&cpsw3g_mdio {
pinctrl-names = "default";
pinctrl-0 = <&main_mdio0_pins_default>;
status = "okay";
cpsw3g_phy0: ethernet-phy@0 {
reg = <0>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
ti,min-output-impedance;
};
cpsw3g_phy1: ethernet-phy@3 {
reg = <3>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
ti,min-output-impedance;
};
};
&mailbox0_cluster0 {
status = "okay";
mbox_r5_0: mbox-r5-0 {
ti,mbox-rx = <0 0 0>;
ti,mbox-tx = <1 0 0>;
};
};
&mailbox0_cluster1 {
status = "okay";
mbox_c7x_0: mbox-c7x-0 {
ti,mbox-rx = <0 0 0>;
ti,mbox-tx = <1 0 0>;
};
};
&mailbox0_cluster2 {
status = "okay";
mbox_mcu_r5_0: mbox-mcu-r5-0 {
ti,mbox-rx = <0 0 0>;
ti,mbox-tx = <1 0 0>;
};
};
&wkup_r5fss0 {
status = "okay";
};
&wkup_r5fss0_core0 {
mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
<&wkup_r5fss0_core0_memory_region>;
bootph-pre-ram;
};
&mcu_r5fss0 {
status = "okay";
};
&mcu_r5fss0_core0 {
mboxes = <&mailbox0_cluster2 &mbox_mcu_r5_0>;
memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
<&mcu_r5fss0_core0_memory_region>;
firmware-name = "am62d-mcu-r5f0_0-fw";
status = "okay";
};
&c7x_0 {
mboxes = <&mailbox0_cluster1 &mbox_c7x_0>;
memory-region = <&c7x_0_dma_memory_region>,
<&c7x_0_memory_region>;
firmware-name = "am62d-c71_0-fw";
status = "okay";
};
/* main_rti4 is used by C7x DSP */
&main_rti4 {
status = "reserved";
};