Path: blob/main/sys/dev/ata/chipsets/ata-netcell.c
39536 views
/*-1* SPDX-License-Identifier: BSD-2-Clause2*3* Copyright (c) 1998 - 2008 Søren Schmidt <[email protected]>4* All rights reserved.5*6* Redistribution and use in source and binary forms, with or without7* modification, are permitted provided that the following conditions8* are met:9* 1. Redistributions of source code must retain the above copyright10* notice, this list of conditions and the following disclaimer,11* without modification, immediately at the beginning of the file.12* 2. Redistributions in binary form must reproduce the above copyright13* notice, this list of conditions and the following disclaimer in the14* documentation and/or other materials provided with the distribution.15*16* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR17* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES18* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.19* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,20* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT21* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,22* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY23* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT24* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF25* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.26*/2728#include <sys/param.h>29#include <sys/module.h>30#include <sys/systm.h>31#include <sys/kernel.h>32#include <sys/ata.h>33#include <sys/bus.h>34#include <sys/endian.h>35#include <sys/malloc.h>36#include <sys/lock.h>37#include <sys/mutex.h>38#include <sys/sema.h>39#include <sys/stdarg.h>40#include <sys/taskqueue.h>41#include <vm/uma.h>42#include <machine/resource.h>43#include <machine/bus.h>44#include <sys/rman.h>45#include <dev/pci/pcivar.h>46#include <dev/pci/pcireg.h>47#include <dev/ata/ata-all.h>48#include <dev/ata/ata-pci.h>49#include <ata_if.h>5051/* local prototypes */52static int ata_netcell_chipinit(device_t dev);53static int ata_netcell_ch_attach(device_t dev);54static int ata_netcell_setmode(device_t dev, int target, int mode);5556/*57* NetCell chipset support functions58*/59static int60ata_netcell_probe(device_t dev)61{62struct ata_pci_controller *ctlr = device_get_softc(dev);6364if (pci_get_devid(dev) == ATA_NETCELL_SR) {65device_set_desc(dev, "Netcell SyncRAID SR3000/5000 RAID Controller");66ctlr->chipinit = ata_netcell_chipinit;67return (BUS_PROBE_LOW_PRIORITY);68}69return ENXIO;70}7172static int73ata_netcell_chipinit(device_t dev)74{75struct ata_pci_controller *ctlr = device_get_softc(dev);7677if (ata_setup_interrupt(dev, ata_generic_intr))78return ENXIO;7980ctlr->ch_attach = ata_netcell_ch_attach;81ctlr->setmode = ata_netcell_setmode;82return 0;83}8485static int86ata_netcell_ch_attach(device_t dev)87{88struct ata_channel *ch = device_get_softc(dev);8990/* setup the usual register normal pci style */91if (ata_pci_ch_attach(dev))92return ENXIO;9394/* the NetCell only supports 16 bit PIO transfers */95ch->flags |= ATA_USE_16BIT;96/* It is a hardware RAID without cable. */97ch->flags |= ATA_CHECKS_CABLE;98return 0;99}100101static int102ata_netcell_setmode(device_t dev, int target, int mode)103{104105return (min(mode, ATA_UDMA6));106}107108ATA_DECLARE_DRIVER(ata_netcell);109110111