JATS-articleauthoring1-mathml3.dtd

<!-- ============================================================= -->
<!--  MODULE:    Article Authoring DTD                             -->
<!--  VERSION:   ANSI/NISO JATS Version 1.2 (Z39.96-2019)          -->
<!--  DATE:      February 2019                                     -->
<!--                                                               -->
<!-- ============================================================= -->

<!-- ============================================================= -->
<!--                    PUBLIC DOCUMENT TYPE DEFINITION            -->
<!--                        TYPICAL INVOCATION                     -->
<!--
"-//NLM//DTD JATS (Z39.96) Article Authoring DTD with MathML3 v1.2 20190208//EN"
     Delivered as file "JATS-articleauthoring1-mathml3.dtd"
     Available at:
     http://jats.nlm.nih.gov/articleauthoring/1.2/JATS-articleauthoring1.dtd
                                                                   -->
<!-- ============================================================= -->


<!-- ============================================================= -->
<!-- SYSTEM:     Article Authoring DTD of the JATS DTD Suite       -->         
<!--                                                               -->
<!-- PURPOSE:    DTD for creation of new journal articles          -->
<!--                                                               -->
<!--             The Article Authoring DTD is an application of    -->
<!--             the ANSI/NISO Z39.96 Article Authoring Tag Set.   -->
<!--             It is a subset of the Journal Archiving and       -->
<!--             Interchange DTD that is optimized for the         -->
<!--             authoring (or initial XML tagging) of journal     -->
<!--             articles and some non-article material such as    -->
<!--             product and book reviews. It describes both the   -->
<!--             metadata for a journal article and the full       -->
<!--             content of the article.                           -->
<!--                                                               -->
<!--             This DTD was constructed using the modules in the -->
<!--             JATS DTD Suite.                                   -->
<!--                                                               -->
<!-- TAG SET SPONSOR                                               -->
<!--             National Center for Biotechnology                 -->
<!--                Information (NCBI)                             -->
<!--             National Library of Medicine (NLM)                -->
<!--                                                               -->
<!-- CREATED FOR:                                                  -->
<!--             This DTD was created from the JATS DTD Suite.     -->
<!--             Authors, digital archives, and publishers may     -->
<!--             use the DTD as is for markup of journal           -->
<!--             literature or related material for archiving      -->
<!--             and transferring such material between archives   -->
<!--             or create a custom XML DTD from the Suite for     -->
<!--             these purposes.                                   -->
<!--                                                               -->
<!--             This DTD is in the public domain. An organization -->
<!--             that wishes to create its own DTD from the suite  -->
<!--             may do so without permission from NLM.            -->
<!--                                                               -->
<!--             The suite has been set up to be extended using a  -->
<!--             new DTD file and a new DTD-specific customization -->
<!--             module to redefine the many Parameter Entities.   -->
<!--             Do not modify the suite directly or redistribute  -->
<!--             modified versions of the suite.                   -->
<!--                                                               -->
<!--             In the interest of maintaining consistency and    -->
<!--             clarity for potential users, NLM requests:        -->
<!--                                                               -->
<!--             1. If you create a DTD from the JATS DTD Suite    -->
<!--                and intend to stay compatible with the suite,  -->
<!--                then please include the following statement    -->
<!--                as a comment in all of your DTD modules:       -->
<!--                   "Created from, and fully compatible with,   -->
<!--                    the ANSI/NISO Z39.96 Journal Article Tag   -->
<!--                    Suite (JATS)."                             -->
<!--                                                               -->
<!--             2. If you alter one or more modules of the suite, -->
<!--                then please rename your version and all its    -->
<!--                modules to avoid any confusion with the        -->
<!--                original suite. Also, please include the       -->
<!--                following statement as a comment in all your   -->
<!--                DTD modules:                                   -->
<!--                   "Based in part on, but not fully compatible -->
<!--                    with, the ANSI/NISO Z39.96 Journal Article -->
<!--                    Tag Suite (JATS)."                         -->
<!--                                                               -->
<!-- ORIGINAL CREATION DATE:                                       -->
<!--             June 2005                                         -->
<!--                                                               -->
<!-- CREATED BY: Mulberry Technologies, Inc. for the NISO Z39.96   -->
<!--             Working Group. Mulberry Technologies was          -->
<!--             supported by National Center for Biotechnology    -->
<!--             Information (NCBI), a center of the US National   -->
<!--             Library of Medicine (NLM).                        -->
<!--                                                               -->
<!--             The Article Authoring DTD is built from the       -->
<!--             Archiving and Interchange DTD Suite.              -->
<!--                                                               -->
<!--             Suggestions for refinements and enhancements to   -->
<!--             this DTD should be sent in email to:              -->
<!--                 [email protected]                         -->
<!-- ============================================================= -->


<!-- ============================================================= -->
<!--                    DTD VERSION\CHANGE HISTORY                 -->
<!-- ============================================================= -->
<!--

Version  Reason/Occasion                   (who) vx.x (yyyy-mm-dd)
     ==============================================================
     JATS Version 1.2 (ANSI/NISO Z39.96-2019)
                                   (DAL/BTU) v1.2     (2019-02-08)
    
     NISO JATS is a continuing maintenance NISO Standard, which 
     requires voting by the both the NISO and ANSI membership 
     to be changed. This version of the NISO JATS was approved 
     by ANSI vote on Feb 08, 2019, so it supersedes all Committee 
     Drafts as well as the draft version JATS 1.2 2018 (the version
     submitted for vote), becoming NISO JATS v1.2 20190208 
     (ANSI/NISO Z39.96-2019).
  
 25. JATS "1.2" becomes "v1.2 20190208" (final ANSI vote date)
     "ANSI/NISO Z39.96-2015" becomes "ANSI/NISO Z39.96-2019"

==============================================================
     JATS Version 1.2 (ANSI/NISO Z39.96-2018)
     and BITS 2.1 (v2.0 20180401)
                                   (DAL/BTU) v1.2     (2018-11-30)
    
     NISO JATS is a continuing maintenance NISO Standard, which 
     requires voting by the both the NISO and ANSI membership 
     to be changed. This version of the NISO JATS was approved 
     by ANSI and NISO vote, so it supersedes all Committee Drafts
     and becoming NISO JATS 1.2 (ANSI/NISO Z39.96-2018).
 
 24. @dtd-version becomes "1.2d" from "1.2d2"
  
 23. BITS "2.1" and "v2.0 20180401" remains unchanged.
     JATS "1.2d2" and "v1.2d2 20180401" became
     JATS "1.2" and "v1.2 20181130" 

    =============================================================
     BITS Version 2.1                (DAL/BTU) v2.1    (2018-04-01)
     JATS Version 1.2d2              (DAL/BTU) v1.2d2  (2018-04-01)

     JATS is a continuing maintenance NISO Standard, which
     requires voting by the ANSI and NISO memberships to be changed. 
     BITS is under continuous maintenance, and is modified at the
     discretion of the working group.
      
     This draft DTD represents an interim version of the
     non-normative JATS DTD Suite, as an indication to JATS users
     the decisions that have been made by the JATS Standing
     Committee. This draft has not yet been given public review 
     or voting. The formal public identifiers were changed in the 
     modules and the catalogs.
  
 22. INLINE INDEX TERMS  - Added invocation to BITS inline
     (embedded) index term model

 21. @dtd-version becomes "1.2d2" from "1.2d1"

 20. BITS "2.0" and "v2.0 20151225" became
     BITS "2.1" and "v2.1 20180401". 
   
     JATS "1.2d1" and "v1.2d1 20171231" became
     JATS "1.2d2" and "v1.2d2 20180401". 

     No module names were changed.
 
    =============================================================
     JATS Version 1.2d1 (ANSI/NISO Z39.96-2015)
                                   (DAL/BTU) v1.2d1  (2017-12-31)
 
     NISO JATS is a continuing maintenance NISO Standard, which
     requires voting by the ANSI and NISO memberships to be changed. 
      
     This draft DTD represents an interim version of the
     non-normative JATS DTD Suite, as an indication to JATS users
     the decisions that have been made by the JATS Standing
     Committee. This draft has not yet been given public review 
     or voting. The formal public identifiers were changed in the 
     modules and the catalogs.
  
 19. JATS "1.2d1" and "v1.2d1 20170631" became
     JATS "1.2d1" and "v1.2d1 20171231". 

    =============================================================
     JATS Version 1.2d1              (DAL/BTU) v1.2d1  (2017-06-31)

     NISO JATS is a continuing maintenance NISO Standard, which
     requires voting by the ANSI and NISO memberships to be changed. 
      
     This draft DTD represents an interim version of the
     non-normative JATS DTD Suite, as an indication to JATS users
     the decisions that have been made by the JATS Standing
     Committee. This draft has not yet been given public review 
     or voting. The formal public identifiers were changed in the 
     modules and the catalogs.

 18. xsi:noNamespaceSchemaLocation added to attribute list of
     <article>. Most modern processors do not need this, but
     a user with an older processor requested it, so the JATS
     Standing Committee acquiesced. This pseudo-attribute
     cannot be used with a DOCTYPE declaration.
 
 17. @dtd-version becomes "1.2d1" from 1.1
 
 16. JATS became version "1.2d1" and "v1.2d1 20170631" 

    =============================================================
     JATS Version 1.1                (DAL/BTU) v1.1  (2015-12-15)

     JATS is a continuing maintenance NISO Standard, which
     requires voting by the ANSI and NISO memberships to be changed. 
     JATS 1.1 was approved in late 2015, so the formal public 
     identifiers were changed in the modules and the catalogs.
     No model or attribute changes were made at this time. 

 15. JATS became version "1.1" and "v1.1 20151215"

     =============================================================
     JATS Version 1.1d3             (DAL/BTU) v1.1d3  (2015-03-01)
   
     The changes in this release are in response to NISO 
     License and Indicators Recommended Practice.

     NISO JATS is a continuing maintenance NISO Standard, which 
     requires voting by the NISO membership to be changed. This
     Committee Draft 1.1d3 will be sent to the NISO voting
     membership, to become (if approved) NISO JATS 1.1.
     
     This draft DTD represents an interim version of the
     non-normative JATS DTD Suite, as an indication to JATS users
     the decisions that have been made by the JATS Standing
     Committee.

 14. ALI - Added ALI namespace for NISO Access and Indicator 
     license reference and free to read elements.

 13. JATS became version "1.1d3" and "v1.1d3 20150301"

     =============================================================
     JATS Version 1.1d2             (DAL/BTU) v1.1d2  (2014-09-30)
   
     NISO JATS is a continuing maintenance NISO Standard, which 
     requires voting by the NISO membership to be changed. This
     Committee Draft 1.1d2 will be sent to the NISO voting
     membership, to become (if approved) NISO JATS 1.1.
     
     This catalog represents an interim version of the
     non-normative JATS DTD Suite, as an indication to JATS users
     the decisions that have been made by the JATS Standing
     Committee.

 12. JATS became version "1.1d2" and "v1.1d2 20140930//EN"
  
     =============================================================
     NISO JATS Version 1.1d1           (DAL/BTU) v1.1 (2013-11-15)
   
     ANSI/NISO Z39.96-2012 (pre-release for V1.0 BITS; Version 1.1d1) 

     NISO JATS Standing Committee met and answered the requests and
     suggestions from the NISO request forms.

     Details concerning ANSI/NISO Z39.96-2012 JATS-based DTDs,  
     XSDs, RNGs and supporting documentation are available at
           http://jats.nlm.nih.gov/1.0/
   
 11. MATHML 3.0 - Created a new version of the Authoring DTD to
     take MathML 3.0 instead of MathML 2.0.
     Nothing else changed from regular Authoring DTD.
     Call to MathML setup module changed and added call to the
     specific MathML 3.0 modules.
   
 10. DTD Version - Updated the DTD-version attribute to "1.1d1" and 
     the formal public identifier to the date: "v1.1d1 20130915//EN".

  9. GLOBAL ATTRIBUTES - Added the new module for Common (global)
     attributes: %JATS-common-atts.ent;, called in before the
     customizations models module.

  8. GLOBAL ATTRIBUTES - Added the new parameter entity 
         %jats-common-atts;
     to every element in this module. This PE adds (for now) the
     @id attribute and the @xml:base attribute to every element,
     whether metadata or narrative.
     Since the @id in this parameter entity is optional, a second
     parameter entity jats-common-atts-id-required was also added.
     The two are kept in sync with the jats-base-atts parameter 
     entity.
     This added a new attribute list to:
      - back
      - body
      - front
   
     =============================================================
     NISO JATS Version 1.0             (DAL/BTU) v1.0 (2012-xx-xx)
   
     ANSI/NISO Z39.96-2012 (Version 1.0) 

     Details concerning ANSI/NISO Z39.96-2012 JATS-based DTDs,  
     XSDs, RNGs and supporting documentation are available at
           http://jats.nlm.nih.gov/1.0/
   
  7. Fixed content models that were stated as "P*" and "sec*"
     to use the %just-para.class; and %sec.class; classes. 
     Element models that were changed include:
      - back

     =============================================================
     Version 0.4                       (DAL/BTU) v0.4 (2011-01-31)
   
     This Tag Set is in the process of becoming a NISO standard.
     The version numbers are starting over from 0.4", as a Trial
     Use Draft, to be made into "Version 1.0" when the Tag Suite 
     becomes a NISO standard. Thus, the version number that would
     have been "NLM Version 3.1 Draft" has become NISO JATS
     "Version 0.4".

     Details on NISO Trial Use Draft Version 0.4 are available at
           http://jats.nlm.nih.gov/JATS-0.4.
   
  6. Updated the DTD-version attribute to "0.4" 
   
  5. Updated the public identifier to "v0.4 20110131", 
     modified the formal public identifier to include "JATS (Z39.96)",
     and the filename as delivered to include "JATS" and the
     new version number "0".
           http://jats.nlm.nih.gov/0.4.

  4. XML:LANG - Added @xml:lang to the following elements:
     Added to facilitate multiple languages.
       - article

  3. LANGUAGE CODES - Codes for languages as well as variants,
     transliterations, regions, scripts, and combinations
     such as "Jpan"(Han + Hiragana + Katakana). These values should be
     taken from RFC 5646/W3C/IANA Subtag Registry recommendations
     and can be found online at:
       http://www.iana.org/assignments/language-subtag-registry

     =============================================================
     Version 3.0                       (DAL/BTU) v3.0 (2007-10-31)

     Version 3.0 is the first non-backward-compatible release.
     In addition to the usual incremental changes, some
     elements and attributes have been renamed and/or remodeled
     to better meet user needs and to increase tag set consistency.
     All module change histories are available through the Tag Suite
     web site at http://dtd.nlm.nih.gov.

     Details on version 3.0 are available at
           http://dtd.nlm.nih.gov/3.0.

  2. Changed default @xml:lang from "EN" from "en" to match latest
     RFC 4646/W3C/IANA Subtag Registry recommendations

  1. Updated public identifier to "v3.0 20071031//EN"              -->

<!-- ============================================================= -->
<!-- Details concerning 
     ANSI/NISO Z39.96-2015 JATS-based DTDs, XSDs, 
     RNGs and supporting documentation are available at
           http://jats.nlm.nih.gov/1.1/                            -->

<!-- ============================================================= -->
<!--                    DESIGN CONSIDERATIONS                      -->
<!-- ============================================================= -->


<!-- MODULAR DTD LIBRARY
                        A set of journal archiving and interchange
                        DTD modules was written as the basis for
                        article creation, publishing, interchange,
                        and repository DTDs, with the intention that
                        DTDs for specific purposes, such as this
                        Authoring  DTD, would be developed based on
                        them.

                        This Authoring DTD has been optimized for
                        the creation of new journal articles by
                        individual authors. This means that it lacks
                        all the journal-related material (such as
                        the journal metadata) that are not the
                        responsibility of the author but of the
                        publisher. This DTD is also smaller (fewer
                        elements and fewer choices in many contexts)
                        than either the Publishing or Archiving DTDs.
                        It was not the intention to limit the
                        expressive power licensed by the DTD, but
                        rather to limit the many paths where there
                        are several ways to tag the same material,
                        where an archiving or publishing DTD needs to
                        be able to accept all styles.              -->


<!-- ============================================================= -->
<!--                    MODULE OF MODULES INVOKED                  -->
<!-- ============================================================= -->


<!--                    MODULE TO NAME DTD-SPECIFIC MODULES        -->
<!--                    Names all DTD-specific external modules    -->
<!ENTITY % articleauthcustom-modules.ent 
                        PUBLIC
"-//NLM//DTD JATS (Z39.96) Article Authoring DTD-Specific Modules v1.2 20190208//EN"
"JATS-articleauthcustom-modules1.ent"                                 >
%articleauthcustom-modules.ent;


<!--                    MODULE TO NAME THE MATHML 3.0 MODULES      -->
<!--                    Names all DTD-specific external modules    -->
<!ENTITY % mathml3-modules.ent
                        PUBLIC
"-//NLM//DTD JATS (Z39.96) JATS MathML 3.0 Modules v1.2 20190208//EN"
"JATS-mathml3-modules1.ent"                                          >
%mathml3-modules.ent;


<!--                    MODULE TO NAME THE MODULES                 -->
<!--                    Names all the external modules (except
                        itself and the Customization Module) that
                        are part of the modular JATS DTD Suite 
                        library.
                           This DTD then selects from those
                        modules by referencing the external
                        Parameter Entities defined in the Module of
                        Modules. To include a set of elements (such
                        as all the lists or the table elements) this
                        DTD references the external Parameter Entity
                        of the module that contains the declarations.
                                                                   -->
<!ENTITY % modules.ent  PUBLIC
"-//NLM//DTD JATS (Z39.96) JATS DTD Suite Module of Modules v1.2 20190208//EN"
"JATS-modules1.ent"                                                  >
%modules.ent;

<!-- ============================================================= -->
<!--                    NISO ALI NAMESPACE SETUP                   -->
<!-- ============================================================= -->


<!--                    DEFINE ALI NAMESPACE ATTRIBUTE AND PREFIX  -->
<!--                    Names the module defines the NISO Access and 
                        Indicators Exchange Model namespace, prefix, 
                        and pseudo-attribute @xmlns.               -->
%JATS-ali-namespace.ent;
                                                           

<!-- ============================================================= -->
<!--                    SET UP COMMON (ALL ELEMENT) ATTRIBUTES     -->
<!-- ============================================================= -->


<!--                    COMMON ATTRIBUTES MODULE                   -->
<!--                    Set up the common attributes, those used on
                        nearly all elements.
                        Must be called before the custom models
                        module.                                    -->
%JATS-common-atts.ent;


<!-- ============================================================= -->
<!--                    CUSTOMIZATION MODULES INVOKED              -->
<!--                    Note: These modules must be called after   -->
<!--                    all Module of Modules but before any other -->
<!--                    modules. Unlike any other grouping, order  -->
<!--                    of these modules matters.                  -->
<!-- ============================================================= -->


<!--                    DTD-SPECIFIC CLASS CUSTOMIZATIONS MODULE   -->
<!--                    Names the module that holds the DTD-specific
                        class definitions for the Article Authoring
                        DTD that will over-ride the Suite defaults.
                        (Defined in %articleauthcustom-modules.ent; )
                                                                   -->
%articleauthcustom-classes.ent;


<!--                    DEFAULT ELEMENT CLASSES MODULE             -->
<!--                    Names the module that holds the standard
                        class definitions for the JATS DTD Suite.  -->
%default-classes.ent;


<!--                    DTD-SPECIFIC MIX CUSTOMIZATIONS MODULE     -->
<!--                    Set up the Parameter Entities and element
                        class definitions that will be used to
                        over-ride some element mixes in this DTD.
                        (Defined in %articleauthcustom-modules.ent;)  
                                                                   -->
%articleauthcustom-mixes.ent;


<!--                    DEFAULT MIX CUSTOMIZATIONS MODULE          -->
<!--                    Names the module that holds the standard
                        mix definitions for the JATS DTD Suite.    -->
%default-mixes.ent;


<!--                    DTD-SPECIFIC MODELS/ATTRIBUTES CUSTOMIZATIONS
                        MODULE                                     -->
<!--                    Names the module that holds the over-rides
                        of content models, attribute lists, elements
                        lists to be used in content models, and
                        attribute values. These are DTD-specific.
                        (Defined in %articleauthcustom-modules.ent; )  
                                                                   -->
%articleauthcustom-models.ent;



<!-- ============================================================= -->
<!--                    COMMON (SHARED) ELEMENTS MODULE INVOKED    -->
<!-- ============================================================= -->


<!--                    COMMON (SHARED) DECLARATIONS               -->
<!--                    Declarations for elements, attributes,
                        entities, and Notations that are shared by
                        more than one class module. Note: Must be
                        called before any of the class modules.    -->

%common.ent;


<!-- ============================================================= -->
<!--                    JOURNAL ARTICLE CLASS ELEMENTS (alpha)     -->
<!-- ============================================================= -->


<!--                    ARTICLE METADATA ELEMENTS                  -->
%articlemeta.ent;


<!--                    BACK MATTER ELEMENTS                       -->
%backmatter.ent;


<!--                    DISPLAY (GRAPHICAL) ELEMENTS               -->
%display.ent;


<!--                    FORMATTING ELEMENTS                        -->
<!--                    Elements that change rendition/display.    -->
%format.ent;


<!--                    FUNDING ELEMENTS                           -->
<!--                    Elements that describe the sponsorship or
                        open access                                -->
%funding.ent;


<!--                    LINK CLASS ELEMENTS                        -->
%link.ent;


<!--                    LIST CLASS ELEMENTS                        -->
%list.ent;


<!--                    MATH ELEMENTS                              -->
%math.ent;


<!--                    NLM CITATION ELEMENT                       -->
%nlmcitation.ent;


<!--                    PARAGRAPH-LEVEL ELEMENTS                   -->
%para.ent;


<!--                    PHRASE-LEVEL ELEMENTS                      -->
%phrase.ent;


<!--                    BIBLIOGRAPHIC REFERENCE (CITATION)
                        CLASS ELEMENTS                             -->
%references.ent;


<!--                    RELATED OBJECT ELEMENT                     -->
<!--                    Defines the <related-object> element to
                        describe a related object such as a
                        related book or a dataset.                 -->
%related-object.ent;


<!--                    SECTION ELEMENTS                           -->
%section.ent;


<!-- ============================================================= -->
<!--                    THE REST OF THE EXTERNAL MODULES INVOKED   -->
<!-- ============================================================= -->


<!--                    BITS EMBEDDED INDEX ELEMENTS MODULE        -->
<!--                    Element declarations the index elements
                        which are embedded in the article 
                        narrative.                                 -->
%index-term.ent;


<!-- ============================================================= -->
<!--                    THE REST OF THE EXTERNAL MODULES INVOKED   -->
<!-- ============================================================= -->


<!--                    MATHML SETUP MODULE                        -->
<!--                    Invoke the MathML modules                  -->
%mathml3-mathmlsetup.ent;



<!--                    XHTML TABLE SETUP MODULE                   -->
<!--                    Set up the necessary Parameter Entity values
                        and then invoke XHTML (HTML 4.0) table
                        module                                     -->
%XHTMLtablesetup.ent;


<!--                    SPECIAL CHARACTERS DECLARATIONS            -->
<!--                    Standard XML special character entities
                        used in this DTD                           -->
%xmlspecchars.ent;


<!--                    CUSTOM SPECIAL CHARACTERS DECLARATIONS     -->
<!--                    Custom special character entities created
                        specifically for use in this DTD Suite     -->
%chars.ent;


<!--                    NOTATION DECLARATIONS MODULE               -->
%notat.ent;
<!-- ============================================================= -->


<!-- ============================================================= -->
<!--                    PARAMETER ENTITIES FOR ATTRIBUTE LISTS     -->
<!-- ============================================================= -->


<!--                    DTD VERSION                                -->
<!--                    What version of this DTD was used to make
                        the document instance under consideration.
                        Note that this is a fixed value that should
                        change every time the DTD changes versions or
                        revisions.                                 -->
<!ENTITY % dtd-version
            "dtd-version
                        CDATA                      #FIXED '1.2'"     >



<!--                    ARTICLE ATTRIBUTES                         -->
<!--                    Attributes for the top-level element
                        <article>                                  -->
<!ENTITY % article-atts
            "%jats-common-atts;                                       
             article-type
                        CDATA                             #IMPLIED
             %dtd-version;
             specific-use
                        CDATA                             #IMPLIED
             xml:lang   NMTOKEN                           'en'
             %XLINK.xmlns.attrib;
             %MATHML.xmlns.attrib;
             %ali.xmlns.attrib;
             %Schema.xmlns.attrib; 
             %Schema.prefix;:noNamespaceSchemaLocation   
                        CDATA          #IMPLIED"                    >


<!--                    BACK ATTRIBUTES                            -->
<!--                    Attributes for the <back> element          -->
<!ENTITY % back-atts
            "%jats-common-atts;"                                     >


<!--                    BODY ATTRIBUTES                            -->
<!--                    Attributes for the <body> element          -->
<!ENTITY % body-atts
            "%jats-common-atts;"                                     >


<!--                    FRONT ATTRIBUTES                           -->
<!--                    Attributes for the <front> element         -->
<!ENTITY % front-atts
            "%jats-common-atts;"                                     >


<!-- ============================================================= -->
<!--                    JOURNAL ARTICLE ELEMENTS                   -->
<!-- ============================================================= -->


<!--                    ARTICLE MODEL (LIMITED)                    -->
<!ENTITY % article-short-model
                        "(front, body, back?)"                       >


<!--                    ARTICLE                                    -->
<!--                    The complete content of a journal article.
                        Details at:
                        http://jats.nlm.nih.gov/articleauthoring/tag-library/1.2d2/index.html?elem=article
                                                                   -->
<!ELEMENT  article      %article-short-model;                        >
<!ATTLIST  article
             %article-atts;                                          >


<!-- ============================================================= -->
<!--                    FRONT MATTER ELEMENTS                      -->
<!-- ============================================================= -->


<!--                    FRONT MATTER MODEL                         -->
<!ENTITY % front-model  "(article-meta)"                             >

<!--                    FRONT MATTER                               -->
<!--                    The metadata concerning an article, such as
                        the name and issue of the journal in which it
                        appears and the name and author(s) of the
                        article.
                        Details at:
                        http://jats.nlm.nih.gov/articleauthoring/tag-library/1.2d2/index.html?elem=front
                                                                   -->
<!ELEMENT  front        %front-model;                                >
<!ATTLIST  front
             %front-atts;                                            >


<!-- ============================================================= -->
<!--                    BODY ELEMENTS                              -->
<!-- ============================================================= -->


<!--                    BODY MODEL                                 -->
<!--                    Content model for the Body (main textual
                        content) of a journal article.             -->
<!ENTITY % body-model   "((%para-level;)*, (%sec-level;)*)"          >


<!--                    BODY OF THE ARTICLE                        -->
<!--                    The main textual portion of the article that
                        conveys the content.
                        Details at:
                        http://jats.nlm.nih.gov/articleauthoring/tag-library/1.2d2/index.html?elem=body
                                                                   -->
<!ELEMENT  body         %body-model;                                 >
<!ATTLIST  body
             %body-atts;                                             >


<!-- ============================================================= -->
<!--                    BACK MATTER ELEMENTS                       -->
<!-- ============================================================= -->


<!--                    BACK MATTER MODEL                          -->
<!--                    Content model for the Back Matter (ancillary
                        material such as appendices) of a journal
                        article.                                   -->
<!ENTITY % back-model   "(ack?, glossary?, (%ref-list.class;)*, 
                          app-group?)"                               >


<!--                    BACK MATTER                                -->
<!--                    Ancillary or supporting material not included
                        as part of the main textual content of a
                        journal article, for example appendices and
                        acknowledgments.
                        Details at:
                        http://jats.nlm.nih.gov/articleauthoring/tag-library/1.2d2/index.html?elem=back
                                                                   -->
<!ELEMENT  back         %back-model;                                 >
<!ATTLIST  back
             %back-atts;                                             >


<!-- ================== End Article Authoring DTD ================ -->