Path: blob/master/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
38306 views
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
*/
/dts-v1/;
#include "hamoa-iot-som.dtsi"
/ {
model = "Qualcomm Technologies, Inc. Hamoa IoT EVK";
compatible = "qcom,hamoa-iot-evk", "qcom,hamoa-iot-som", "qcom,x1e80100";
chassis-type = "embedded";
aliases {
serial0 = &uart21;
serial1 = &uart14;
};
wcd938x: audio-codec {
compatible = "qcom,wcd9385-codec";
pinctrl-0 = <&wcd_default>;
pinctrl-names = "default";
reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
qcom,micbias1-microvolt = <1800000>;
qcom,micbias2-microvolt = <1800000>;
qcom,micbias3-microvolt = <1800000>;
qcom,micbias4-microvolt = <1800000>;
qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000
500000 500000 500000 500000>;
qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
qcom,rx-device = <&wcd_rx>;
qcom,tx-device = <&wcd_tx>;
vdd-buck-supply = <&vreg_l15b_1p8>;
vdd-rxtx-supply = <&vreg_l15b_1p8>;
vdd-io-supply = <&vreg_l15b_1p8>;
vdd-mic-bias-supply = <&vreg_bob1>;
#sound-dai-cells = <1>;
};
chosen {
stdout-path = "serial0:115200n8";
};
pmic-glink {
compatible = "qcom,x1e80100-pmic-glink",
"qcom,sm8550-pmic-glink",
"qcom,pmic-glink";
#address-cells = <1>;
#size-cells = <0>;
orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
<&tlmm 123 GPIO_ACTIVE_HIGH>,
<&tlmm 125 GPIO_ACTIVE_HIGH>;
connector@0 {
compatible = "usb-c-connector";
reg = <0>;
power-role = "dual";
data-role = "dual";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
pmic_glink_ss0_hs_in: endpoint {
remote-endpoint = <&usb_1_ss0_dwc3_hs>;
};
};
port@1 {
reg = <1>;
pmic_glink_ss0_ss_in: endpoint {
remote-endpoint = <&usb_1_ss0_qmpphy_out>;
};
};
port@2 {
reg = <2>;
pmic_glink_ss0_sbu: endpoint {
remote-endpoint = <&usb_1_ss0_sbu_mux>;
};
};
};
};
connector@1 {
compatible = "usb-c-connector";
reg = <1>;
power-role = "dual";
data-role = "dual";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
pmic_glink_ss1_hs_in: endpoint {
remote-endpoint = <&usb_1_ss1_dwc3_hs>;
};
};
port@1 {
reg = <1>;
pmic_glink_ss1_ss_in: endpoint {
remote-endpoint = <&retimer_ss1_ss_out>;
};
};
port@2 {
reg = <2>;
pmic_glink_ss1_con_sbu_in: endpoint {
remote-endpoint = <&retimer_ss1_con_sbu_out>;
};
};
};
};
connector@2 {
compatible = "usb-c-connector";
reg = <2>;
power-role = "dual";
data-role = "dual";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
pmic_glink_ss2_hs_in: endpoint {
remote-endpoint = <&usb_1_ss2_dwc3_hs>;
};
};
port@1 {
reg = <1>;
pmic_glink_ss2_ss_in: endpoint {
remote-endpoint = <&retimer_ss2_ss_out>;
};
};
port@2 {
reg = <2>;
pmic_glink_ss2_con_sbu_in: endpoint {
remote-endpoint = <&retimer_ss2_con_sbu_out>;
};
};
};
};
};
vreg_edp_3p3: regulator-edp-3p3 {
compatible = "regulator-fixed";
regulator-name = "VREG_EDP_3P3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&edp_reg_en>;
pinctrl-names = "default";
regulator-boot-on;
};
vreg_nvme: regulator-nvme {
compatible = "regulator-fixed";
regulator-name = "VREG_NVME_3P3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&nvme_reg_en>;
pinctrl-names = "default";
regulator-boot-on;
};
/* Left unused as the retimer is not used on this board. */
vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
compatible = "regulator-fixed";
regulator-name = "VREG_RTMR0_1P15";
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&usb0_pwr_1p15_reg_en>;
pinctrl-names = "default";
regulator-boot-on;
};
vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
compatible = "regulator-fixed";
regulator-name = "VREG_RTMR0_1P8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&usb0_1p8_reg_en>;
pinctrl-names = "default";
regulator-boot-on;
};
vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
compatible = "regulator-fixed";
regulator-name = "VREG_RTMR0_3P3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&usb0_3p3_reg_en>;
pinctrl-names = "default";
regulator-boot-on;
};
vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
compatible = "regulator-fixed";
regulator-name = "VREG_RTMR1_1P15";
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&usb1_pwr_1p15_reg_en>;
pinctrl-names = "default";
regulator-boot-on;
};
vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
compatible = "regulator-fixed";
regulator-name = "VREG_RTMR1_1P8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&usb1_pwr_1p8_reg_en>;
pinctrl-names = "default";
regulator-boot-on;
};
vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
compatible = "regulator-fixed";
regulator-name = "VREG_RTMR1_3P3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&usb1_pwr_3p3_reg_en>;
pinctrl-names = "default";
regulator-boot-on;
};
vreg_rtmr2_1p15: regulator-rtmr2-1p15 {
compatible = "regulator-fixed";
regulator-name = "VREG_RTMR2_1P15";
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
gpio = <&tlmm 189 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&usb2_pwr_1p15_reg_en>;
pinctrl-names = "default";
regulator-boot-on;
};
vreg_rtmr2_1p8: regulator-rtmr2-1p8 {
compatible = "regulator-fixed";
regulator-name = "VREG_RTMR2_1P8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&tlmm 126 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&usb2_pwr_1p8_reg_en>;
pinctrl-names = "default";
regulator-boot-on;
};
vreg_rtmr2_3p3: regulator-rtmr2-3p3 {
compatible = "regulator-fixed";
regulator-name = "VREG_RTMR2_3P3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&tlmm 187 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&usb2_pwr_3p3_reg_en>;
pinctrl-names = "default";
regulator-boot-on;
};
vph_pwr: regulator-vph-pwr {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
regulator-always-on;
regulator-boot-on;
};
/*
* TODO: These two regulators are actually part of the removable M.2
* card and not the EVK mainboard. Need to describe this differently.
* Functionally it works correctly, because all we need to do is to
* turn on the actual 3.3V supply above.
*/
vreg_wcn_0p95: regulator-wcn-0p95 {
compatible = "regulator-fixed";
regulator-name = "VREG_WCN_0P95";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <950000>;
vin-supply = <&vreg_wcn_3p3>;
};
vreg_wcn_1p9: regulator-wcn-1p9 {
compatible = "regulator-fixed";
regulator-name = "VREG_WCN_1P9";
regulator-min-microvolt = <1900000>;
regulator-max-microvolt = <1900000>;
vin-supply = <&vreg_wcn_3p3>;
};
vreg_wcn_3p3: regulator-wcn-3p3 {
compatible = "regulator-fixed";
regulator-name = "VREG_WCN_3P3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&wcn_sw_en>;
pinctrl-names = "default";
regulator-always-on;
regulator-boot-on;
};
vreg_wwan: regulator-wwan {
compatible = "regulator-fixed";
regulator-name = "SDX_VPH_PWR";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&tlmm 221 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&wwan_sw_en>;
pinctrl-names = "default";
regulator-boot-on;
};
sound {
compatible = "qcom,x1e80100-sndcard";
model = "X1E80100-EVK";
audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT",
"TweeterLeft IN", "WSA WSA_SPK2 OUT",
"WooferRight IN", "WSA2 WSA_SPK2 OUT",
"TweeterRight IN", "WSA2 WSA_SPK2 OUT",
"IN1_HPHL", "HPHL_OUT",
"IN2_HPHR", "HPHR_OUT",
"AMIC2", "MIC BIAS2",
"VA DMIC0", "MIC BIAS3",
"VA DMIC1", "MIC BIAS3",
"VA DMIC2", "MIC BIAS1",
"VA DMIC3", "MIC BIAS1",
"TX SWR_INPUT1", "ADC2_OUTPUT";
wcd-playback-dai-link {
link-name = "WCD Playback";
codec {
sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
};
cpu {
sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
};
platform {
sound-dai = <&q6apm>;
};
};
wcd-capture-dai-link {
link-name = "WCD Capture";
codec {
sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
};
cpu {
sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
};
platform {
sound-dai = <&q6apm>;
};
};
wsa-dai-link {
link-name = "WSA Playback";
codec {
sound-dai = <&left_woofer>,
<&left_tweeter>,
<&swr0 0>,
<&lpass_wsamacro 0>,
<&right_woofer>,
<&right_tweeter>,
<&swr3 0>,
<&lpass_wsa2macro 0>;
};
cpu {
sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
};
platform {
sound-dai = <&q6apm>;
};
};
va-dai-link {
link-name = "VA Capture";
codec {
sound-dai = <&lpass_vamacro 0>;
};
cpu {
sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
};
platform {
sound-dai = <&q6apm>;
};
};
};
usb-1-ss0-sbu-mux {
compatible = "onnn,fsusb42", "gpio-sbu-mux";
enable-gpios = <&tlmm 168 GPIO_ACTIVE_LOW>;
select-gpios = <&tlmm 167 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&usb_1_ss0_sbu_default>;
pinctrl-names = "default";
mode-switch;
orientation-switch;
port {
usb_1_ss0_sbu_mux: endpoint {
remote-endpoint = <&pmic_glink_ss0_sbu>;
};
};
};
wcn7850-pmu {
compatible = "qcom,wcn7850-pmu";
vdd-supply = <&vreg_wcn_0p95>;
vddio-supply = <&vreg_l15b_1p8>;
vddaon-supply = <&vreg_wcn_0p95>;
vdddig-supply = <&vreg_wcn_0p95>;
vddrfa1p2-supply = <&vreg_wcn_1p9>;
vddrfa1p8-supply = <&vreg_wcn_1p9>;
bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&wcn_bt_en>;
pinctrl-names = "default";
regulators {
vreg_pmu_rfa_cmn: ldo0 {
regulator-name = "vreg_pmu_rfa_cmn";
};
vreg_pmu_aon_0p59: ldo1 {
regulator-name = "vreg_pmu_aon_0p59";
};
vreg_pmu_wlcx_0p8: ldo2 {
regulator-name = "vreg_pmu_wlcx_0p8";
};
vreg_pmu_wlmx_0p85: ldo3 {
regulator-name = "vreg_pmu_wlmx_0p85";
};
vreg_pmu_btcmx_0p85: ldo4 {
regulator-name = "vreg_pmu_btcmx_0p85";
};
vreg_pmu_rfa_0p8: ldo5 {
regulator-name = "vreg_pmu_rfa_0p8";
};
vreg_pmu_rfa_1p2: ldo6 {
regulator-name = "vreg_pmu_rfa_1p2";
};
vreg_pmu_rfa_1p8: ldo7 {
regulator-name = "vreg_pmu_rfa_1p8";
};
vreg_pmu_pcie_0p9: ldo8 {
regulator-name = "vreg_pmu_pcie_0p9";
};
vreg_pmu_pcie_1p8: ldo9 {
regulator-name = "vreg_pmu_pcie_1p8";
};
};
};
};
&i2c1 {
clock-frequency = <400000>;
status = "okay";
typec-mux@8 {
compatible = "parade,ps8830";
reg = <0x08>;
clocks = <&rpmhcc RPMH_RF_CLK5>;
vdd-supply = <&vreg_rtmr2_1p15>;
vdd33-supply = <&vreg_rtmr2_3p3>;
vdd33-cap-supply = <&vreg_rtmr2_3p3>;
vddar-supply = <&vreg_rtmr2_1p15>;
vddat-supply = <&vreg_rtmr2_1p15>;
vddio-supply = <&vreg_rtmr2_1p8>;
reset-gpios = <&tlmm 185 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&rtmr2_default>;
pinctrl-names = "default";
orientation-switch;
retimer-switch;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
retimer_ss2_ss_out: endpoint {
remote-endpoint = <&pmic_glink_ss2_ss_in>;
};
};
port@1 {
reg = <1>;
retimer_ss2_ss_in: endpoint {
remote-endpoint = <&usb_1_ss2_qmpphy_out>;
};
};
port@2 {
reg = <2>;
retimer_ss2_con_sbu_out: endpoint {
remote-endpoint = <&pmic_glink_ss2_con_sbu_in>;
};
};
};
};
};
&i2c5 {
clock-frequency = <400000>;
status = "okay";
eusb3_repeater: redriver@47 {
compatible = "nxp,ptn3222";
reg = <0x47>;
#phy-cells = <0>;
vdd3v3-supply = <&vreg_l13b_3p0>;
vdd1v8-supply = <&vreg_l4b_1p8>;
reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&eusb3_reset_n>;
pinctrl-names = "default";
};
eusb5_repeater: redriver@43 {
compatible = "nxp,ptn3222";
reg = <0x43>;
#phy-cells = <0>;
vdd3v3-supply = <&vreg_l13b_3p0>;
vdd1v8-supply = <&vreg_l4b_1p8>;
reset-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&eusb5_reset_n>;
pinctrl-names = "default";
};
eusb6_repeater: redriver@4f {
compatible = "nxp,ptn3222";
reg = <0x4f>;
#phy-cells = <0>;
vdd3v3-supply = <&vreg_l13b_3p0>;
vdd1v8-supply = <&vreg_l4b_1p8>;
reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&eusb6_reset_n>;
pinctrl-names = "default";
};
};
&i2c7 {
clock-frequency = <400000>;
status = "okay";
typec-mux@8 {
compatible = "parade,ps8830";
reg = <0x8>;
clocks = <&rpmhcc RPMH_RF_CLK4>;
vdd-supply = <&vreg_rtmr1_1p15>;
vdd33-supply = <&vreg_rtmr1_3p3>;
vdd33-cap-supply = <&vreg_rtmr1_3p3>;
vddar-supply = <&vreg_rtmr1_1p15>;
vddat-supply = <&vreg_rtmr1_1p15>;
vddio-supply = <&vreg_rtmr1_1p8>;
reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&rtmr1_default>;
pinctrl-names = "default";
retimer-switch;
orientation-switch;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
retimer_ss1_ss_out: endpoint {
remote-endpoint = <&pmic_glink_ss1_ss_in>;
};
};
port@1 {
reg = <1>;
retimer_ss1_ss_in: endpoint {
remote-endpoint = <&usb_1_ss1_qmpphy_out>;
};
};
port@2 {
reg = <2>;
retimer_ss1_con_sbu_out: endpoint {
remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
};
};
};
};
};
&lpass_tlmm {
spkr_0_sd_n_active: spkr-0-sd-n-active-state {
pins = "gpio12";
function = "gpio";
drive-strength = <16>;
bias-disable;
};
spkr_1_sd_n_active: spkr-1-sd-n-active-state {
pins = "gpio13";
function = "gpio";
drive-strength = <16>;
bias-disable;
};
spkr_2_sd_n_active: spkr-2-sd-n-active-state {
pins = "gpio17";
function = "gpio";
drive-strength = <16>;
bias-disable;
};
spkr_3_sd_n_active: spkr-3-sd-n-active-state {
pins = "gpio18";
function = "gpio";
drive-strength = <16>;
bias-disable;
};
};
&lpass_vamacro {
pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
pinctrl-names = "default";
vdd-micb-supply = <&vreg_l1b_1p8>;
qcom,dmic-sample-rate = <4800000>;
};
&mdss {
status = "okay";
};
&mdss_dp0 {
status = "okay";
};
&mdss_dp0_out {
link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};
&mdss_dp1 {
status = "okay";
};
&mdss_dp1_out {
link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};
&mdss_dp2 {
status = "okay";
};
&mdss_dp2_out {
link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};
&mdss_dp3 {
/delete-property/ #sound-dai-cells;
pinctrl-0 = <&edp0_hpd_default>;
pinctrl-names = "default";
status = "okay";
aux-bus {
panel {
compatible = "edp-panel";
power-supply = <&vreg_edp_3p3>;
port {
edp_panel_in: endpoint {
remote-endpoint = <&mdss_dp3_out>;
};
};
};
};
};
&mdss_dp3_out {
data-lanes = <0 1 2 3>;
link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
remote-endpoint = <&edp_panel_in>;
};
&mdss_dp3_phy {
vdda-phy-supply = <&vreg_l3j_0p8>;
vdda-pll-supply = <&vreg_l2j_1p2>;
status = "okay";
};
&pcie6a {
vddpe-3v3-supply = <&vreg_nvme>;
};
&pm8550_gpios {
rtmr0_default: rtmr0-reset-n-active-state {
pins = "gpio10";
function = "normal";
power-source = <1>; /* 1.8V */
bias-disable;
input-disable;
output-enable;
};
usb0_3p3_reg_en: usb0-3p3-reg-en-state {
pins = "gpio11";
function = "normal";
power-source = <1>; /* 1.8V */
bias-disable;
input-disable;
output-enable;
};
};
&pm8550ve_9_gpios {
usb0_1p8_reg_en: usb0-1p8-reg-en-state {
pins = "gpio8";
function = "normal";
power-source = <1>; /* 1.8V */
bias-disable;
input-disable;
output-enable;
};
};
&pmc8380_5_gpios {
usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
pins = "gpio8";
function = "normal";
power-source = <1>; /* 1.8V */
bias-disable;
input-disable;
output-enable;
};
};
&smb2360_0 {
status = "okay";
};
&smb2360_0_eusb2_repeater {
vdd18-supply = <&vreg_l3d_1p8>;
vdd3-supply = <&vreg_l2b_3p0>;
};
&smb2360_1 {
status = "okay";
};
&smb2360_1_eusb2_repeater {
vdd18-supply = <&vreg_l3d_1p8>;
vdd3-supply = <&vreg_l14b_3p0>;
};
&smb2360_2 {
status = "okay";
};
&smb2360_2_eusb2_repeater {
vdd18-supply = <&vreg_l3d_1p8>;
vdd3-supply = <&vreg_l8b_3p0>;
};
&swr0 {
status = "okay";
pinctrl-0 = <&wsa_swr_active>;
pinctrl-names = "default";
/* WSA8845, Left Woofer */
left_woofer: speaker@0,0 {
compatible = "sdw20217020400";
pinctrl-0 = <&spkr_0_sd_n_active>;
pinctrl-names = "default";
reg = <0 0>;
reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
#sound-dai-cells = <0>;
sound-name-prefix = "WooferLeft";
vdd-1p8-supply = <&vreg_l15b_1p8>;
vdd-io-supply = <&vreg_l12b_1p2>;
qcom,port-mapping = <1 2 3 7 10 13>;
};
/* WSA8845, Left Tweeter */
left_tweeter: speaker@0,1 {
compatible = "sdw20217020400";
pinctrl-0 = <&spkr_1_sd_n_active>;
pinctrl-names = "default";
reg = <0 1>;
reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
#sound-dai-cells = <0>;
sound-name-prefix = "TweeterLeft";
vdd-1p8-supply = <&vreg_l15b_1p8>;
vdd-io-supply = <&vreg_l12b_1p2>;
qcom,port-mapping = <4 5 6 7 11 13>;
};
};
&swr1 {
status = "okay";
/* WCD9385 RX */
wcd_rx: codec@0,4 {
compatible = "sdw20217010d00";
reg = <0 4>;
qcom,rx-port-mapping = <1 2 3 4 5>;
};
};
&swr2 {
status = "okay";
/* WCD9385 TX */
wcd_tx: codec@0,3 {
compatible = "sdw20217010d00";
reg = <0 3>;
qcom,tx-port-mapping = <2 2 3 4>;
};
};
&swr3 {
status = "okay";
pinctrl-0 = <&wsa2_swr_active>;
pinctrl-names = "default";
/* WSA8845, Right Woofer */
right_woofer: speaker@0,0 {
compatible = "sdw20217020400";
pinctrl-0 = <&spkr_2_sd_n_active>;
pinctrl-names = "default";
reg = <0 0>;
reset-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>;
#sound-dai-cells = <0>;
sound-name-prefix = "WooferRight";
vdd-1p8-supply = <&vreg_l15b_1p8>;
vdd-io-supply = <&vreg_l12b_1p2>;
qcom,port-mapping = <1 2 3 7 10 13>;
};
/* WSA8845, Right Tweeter */
right_tweeter: speaker@0,1 {
compatible = "sdw20217020400";
pinctrl-0 = <&spkr_3_sd_n_active>;
pinctrl-names = "default";
reg = <0 1>;
reset-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>;
#sound-dai-cells = <0>;
sound-name-prefix = "TweeterRight";
vdd-1p8-supply = <&vreg_l15b_1p8>;
vdd-io-supply = <&vreg_l12b_1p2>;
qcom,port-mapping = <4 5 6 7 11 13>;
};
};
&tlmm {
edp_reg_en: edp-reg-en-state {
pins = "gpio70";
function = "gpio";
drive-strength = <16>;
bias-disable;
};
eusb3_reset_n: eusb3-reset-n-state {
pins = "gpio6";
function = "gpio";
drive-strength = <2>;
bias-disable;
output-low;
};
eusb5_reset_n: eusb5-reset-n-state {
pins = "gpio7";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
output-low;
};
eusb6_reset_n: eusb6-reset-n-state {
pins = "gpio184";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
output-low;
};
nvme_reg_en: nvme-reg-en-state {
pins = "gpio18";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
rtmr1_default: rtmr1-reset-n-active-state {
pins = "gpio176";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
rtmr2_default: rtmr2-reset-n-active-state {
pins = "gpio185";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state {
pins = "gpio188";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state {
pins = "gpio175";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state {
pins = "gpio186";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
usb2_pwr_1p15_reg_en: usb2-pwr-1p15-reg-en-state {
pins = "gpio189";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
usb2_pwr_1p8_reg_en: usb2-pwr-1p8-reg-en-state {
pins = "gpio126";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
usb2_pwr_3p3_reg_en: usb2-pwr-3p3-reg-en-state {
pins = "gpio187";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
usb_1_ss0_sbu_default: usb-1-ss0-sbu-state {
mode-pins {
pins = "gpio166";
function = "gpio";
bias-disable;
drive-strength = <2>;
output-high;
};
oe-n-pins {
pins = "gpio168";
function = "gpio";
bias-disable;
drive-strength = <2>;
};
sel-pins {
pins = "gpio167";
function = "gpio";
bias-disable;
drive-strength = <2>;
};
};
wcd_default: wcd-reset-n-active-state {
pins = "gpio191";
function = "gpio";
drive-strength = <16>;
bias-disable;
output-low;
};
wcn_bt_en: wcn-bt-en-state {
pins = "gpio116";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
wwan_sw_en: wwan-sw-en-state {
pins = "gpio221";
function = "gpio";
drive-strength = <4>;
bias-disable;
};
wcn_sw_en: wcn-sw-en-state {
pins = "gpio214";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
/* Switches USB signal routing between the USB connector and the Wi-Fi card. */
wcn_usb_sw_n: wcn-usb-sw-n-state {
pins = "gpio225";
function = "gpio";
drive-strength = <2>;
bias-disable;
output-high;
};
};
&uart14 {
status = "okay";
bluetooth {
compatible = "qcom,wcn7850-bt";
max-speed = <3200000>;
vddaon-supply = <&vreg_pmu_aon_0p59>;
vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
};
};
&uart21 {
compatible = "qcom,geni-debug-uart";
status = "okay";
};
&usb_1_ss0_dwc3_hs {
remote-endpoint = <&pmic_glink_ss0_hs_in>;
};
&usb_1_ss0_hsphy {
phys = <&smb2360_0_eusb2_repeater>;
};
&usb_1_ss0_qmpphy_out {
remote-endpoint = <&pmic_glink_ss0_ss_in>;
};
&usb_1_ss1_dwc3_hs {
remote-endpoint = <&pmic_glink_ss1_hs_in>;
};
&usb_1_ss1_hsphy {
phys = <&smb2360_1_eusb2_repeater>;
};
&usb_1_ss1_qmpphy_out {
remote-endpoint = <&retimer_ss1_ss_in>;
};
&usb_1_ss2_dwc3_hs {
remote-endpoint = <&pmic_glink_ss2_hs_in>;
};
&usb_1_ss2_hsphy {
phys = <&smb2360_2_eusb2_repeater>;
};
&usb_1_ss2_qmpphy_out {
remote-endpoint = <&retimer_ss2_ss_in>;
};
&usb_2_hsphy {
phys = <&eusb5_repeater>;
pinctrl-0 = <&wcn_usb_sw_n>;
pinctrl-names = "default";
};
&usb_mp_hsphy0 {
phys = <&eusb3_repeater>;
};
&usb_mp_hsphy1 {
phys = <&eusb6_repeater>;
};