Path: blob/master/arch/arm64/boot/dts/qcom/ipq9574.dtsi
26498 views
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* IPQ9574 SoC device tree source
*
* Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
* Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include <dt-bindings/clock/qcom,apss-ipq.h>
#include <dt-bindings/clock/qcom,ipq-cmn-pll.h>
#include <dt-bindings/clock/qcom,ipq9574-gcc.h>
#include <dt-bindings/interconnect/qcom,ipq9574.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset/qcom,ipq9574-gcc.h>
#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&intc>;
#address-cells = <2>;
#size-cells = <2>;
clocks {
ref_48mhz_clk: ref-48mhz-clk {
compatible = "fixed-factor-clock";
clocks = <&xo_clk>;
#clock-cells = <0>;
};
sleep_clk: sleep-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
};
xo_board_clk: xo-board-clk {
compatible = "fixed-factor-clock";
clocks = <&ref_48mhz_clk>;
#clock-cells = <0>;
};
xo_clk: xo-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
};
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a73";
reg = <0x0>;
enable-method = "psci";
next-level-cache = <&l2_0>;
clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
clock-names = "cpu";
operating-points-v2 = <&cpu_opp_table>;
cpu-supply = <&ipq9574_s1>;
#cooling-cells = <2>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a73";
reg = <0x1>;
enable-method = "psci";
next-level-cache = <&l2_0>;
clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
clock-names = "cpu";
operating-points-v2 = <&cpu_opp_table>;
cpu-supply = <&ipq9574_s1>;
#cooling-cells = <2>;
};
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a73";
reg = <0x2>;
enable-method = "psci";
next-level-cache = <&l2_0>;
clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
clock-names = "cpu";
operating-points-v2 = <&cpu_opp_table>;
cpu-supply = <&ipq9574_s1>;
#cooling-cells = <2>;
};
cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a73";
reg = <0x3>;
enable-method = "psci";
next-level-cache = <&l2_0>;
clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
clock-names = "cpu";
operating-points-v2 = <&cpu_opp_table>;
cpu-supply = <&ipq9574_s1>;
#cooling-cells = <2>;
};
l2_0: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-unified;
};
};
firmware {
scm {
compatible = "qcom,scm-ipq9574", "qcom,scm";
qcom,dload-mode = <&tcsr 0x6100>;
};
};
memory@40000000 {
device_type = "memory";
/* We expect the bootloader to fill in the size */
reg = <0x0 0x40000000 0x0 0x0>;
};
cpu_opp_table: opp-table-cpu {
compatible = "operating-points-v2-kryo-cpu";
opp-shared;
nvmem-cells = <&cpu_speed_bin>;
opp-936000000 {
opp-hz = /bits/ 64 <936000000>;
opp-microvolt = <725000>;
opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
};
opp-1104000000 {
opp-hz = /bits/ 64 <1104000000>;
opp-microvolt = <787500>;
opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
};
opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <862500>;
opp-supported-hw = <0xf>;
clock-latency-ns = <200000>;
};
opp-1416000000 {
opp-hz = /bits/ 64 <1416000000>;
opp-microvolt = <862500>;
opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1488000000 {
opp-hz = /bits/ 64 <1488000000>;
opp-microvolt = <925000>;
opp-supported-hw = <0x7>;
clock-latency-ns = <200000>;
};
opp-1800000000 {
opp-hz = /bits/ 64 <1800000000>;
opp-microvolt = <987500>;
opp-supported-hw = <0x5>;
clock-latency-ns = <200000>;
};
opp-2208000000 {
opp-hz = /bits/ 64 <2208000000>;
opp-microvolt = <1062500>;
opp-supported-hw = <0x1>;
clock-latency-ns = <200000>;
};
};
pmu {
compatible = "arm,cortex-a73-pmu";
interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
};
rpm: remoteproc {
compatible = "qcom,ipq9574-rpm-proc", "qcom,rpm-proc";
glink-edge {
compatible = "qcom,glink-rpm";
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
qcom,rpm-msg-ram = <&rpm_msg_ram>;
mboxes = <&apcs_glb 0>;
rpm_requests: rpm-requests {
compatible = "qcom,rpm-ipq9574", "qcom,glink-smd-rpm";
qcom,glink-channels = "rpm_requests";
};
};
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
bootloader@4a100000 {
reg = <0x0 0x4a100000 0x0 0x400000>;
no-map;
};
sbl@4a500000 {
reg = <0x0 0x4a500000 0x0 0x100000>;
no-map;
};
tz_region: tz@4a600000 {
reg = <0x0 0x4a600000 0x0 0x400000>;
no-map;
};
smem@4aa00000 {
compatible = "qcom,smem";
reg = <0x0 0x4aa00000 0x0 0x100000>;
hwlocks = <&tcsr_mutex 3>;
no-map;
};
};
soc: soc@0 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
rpm_msg_ram: sram@60000 {
compatible = "qcom,rpm-msg-ram";
reg = <0x00060000 0x6000>;
};
pcie0_phy: phy@84000 {
compatible = "qcom,ipq9574-qmp-gen3x1-pcie-phy";
reg = <0x00084000 0x1000>;
clocks = <&gcc GCC_PCIE0_AUX_CLK>,
<&gcc GCC_PCIE0_AHB_CLK>,
<&gcc GCC_PCIE0_PIPE_CLK>;
clock-names = "aux", "cfg_ahb", "pipe";
assigned-clocks = <&gcc GCC_PCIE0_AUX_CLK>;
assigned-clock-rates = <20000000>;
resets = <&gcc GCC_PCIE0_PHY_BCR>,
<&gcc GCC_PCIE0PHY_PHY_BCR>;
reset-names = "phy", "common";
#clock-cells = <0>;
clock-output-names = "gcc_pcie0_pipe_clk_src";
#phy-cells = <0>;
status = "disabled";
};
pcie2_phy: phy@8c000 {
compatible = "qcom,ipq9574-qmp-gen3x2-pcie-phy";
reg = <0x0008c000 0x2000>;
clocks = <&gcc GCC_PCIE2_AUX_CLK>,
<&gcc GCC_PCIE2_AHB_CLK>,
<&gcc GCC_PCIE2_PIPE_CLK>;
clock-names = "aux", "cfg_ahb", "pipe";
assigned-clocks = <&gcc GCC_PCIE2_AUX_CLK>;
assigned-clock-rates = <20000000>;
resets = <&gcc GCC_PCIE2_PHY_BCR>,
<&gcc GCC_PCIE2PHY_PHY_BCR>;
reset-names = "phy", "common";
#clock-cells = <0>;
clock-output-names = "gcc_pcie2_pipe_clk_src";
#phy-cells = <0>;
status = "disabled";
};
rng: rng@e3000 {
compatible = "qcom,ipq9574-trng", "qcom,trng";
reg = <0x000e3000 0x1000>;
clocks = <&gcc GCC_PRNG_AHB_CLK>;
clock-names = "core";
};
mdio: mdio@90000 {
compatible = "qcom,ipq9574-mdio", "qcom,ipq4019-mdio";
reg = <0x00090000 0x64>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&gcc GCC_MDIO_AHB_CLK>;
clock-names = "gcc_mdio_ahb_clk";
status = "disabled";
};
pcie3_phy: phy@f4000 {
compatible = "qcom,ipq9574-qmp-gen3x2-pcie-phy";
reg = <0x000f4000 0x2000>;
clocks = <&gcc GCC_PCIE3_AUX_CLK>,
<&gcc GCC_PCIE3_AHB_CLK>,
<&gcc GCC_PCIE3_PIPE_CLK>;
clock-names = "aux", "cfg_ahb", "pipe";
assigned-clocks = <&gcc GCC_PCIE3_AUX_CLK>;
assigned-clock-rates = <20000000>;
resets = <&gcc GCC_PCIE3_PHY_BCR>,
<&gcc GCC_PCIE3PHY_PHY_BCR>;
reset-names = "phy", "common";
#clock-cells = <0>;
clock-output-names = "gcc_pcie3_pipe_clk_src";
#phy-cells = <0>;
status = "disabled";
};
pcie1_phy: phy@fc000 {
compatible = "qcom,ipq9574-qmp-gen3x1-pcie-phy";
reg = <0x000fc000 0x1000>;
clocks = <&gcc GCC_PCIE1_AUX_CLK>,
<&gcc GCC_PCIE1_AHB_CLK>,
<&gcc GCC_PCIE1_PIPE_CLK>;
clock-names = "aux", "cfg_ahb", "pipe";
assigned-clocks = <&gcc GCC_PCIE1_AUX_CLK>;
assigned-clock-rates = <20000000>;
resets = <&gcc GCC_PCIE1_PHY_BCR>,
<&gcc GCC_PCIE1PHY_PHY_BCR>;
reset-names = "phy", "common";
#clock-cells = <0>;
clock-output-names = "gcc_pcie1_pipe_clk_src";
#phy-cells = <0>;
status = "disabled";
};
cmn_pll: clock-controller@9b000 {
compatible = "qcom,ipq9574-cmn-pll";
reg = <0x0009b000 0x800>;
clocks = <&ref_48mhz_clk>,
<&gcc GCC_CMN_12GPLL_AHB_CLK>,
<&gcc GCC_CMN_12GPLL_SYS_CLK>;
clock-names = "ref", "ahb", "sys";
#clock-cells = <1>;
assigned-clocks = <&cmn_pll CMN_PLL_CLK>;
assigned-clock-rates-u64 = /bits/ 64 <12000000000>;
};
qfprom: efuse@a4000 {
compatible = "qcom,ipq9574-qfprom", "qcom,qfprom";
reg = <0x000a4000 0x5a1>;
#address-cells = <1>;
#size-cells = <1>;
cpu_speed_bin: cpu-speed-bin@15 {
reg = <0x15 0x2>;
bits = <7 2>;
};
};
cryptobam: dma-controller@704000 {
compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
reg = <0x00704000 0x20000>;
interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
qcom,ee = <1>;
qcom,num-ees = <4>;
num-channels = <16>;
qcom,controlled-remotely;
};
crypto: crypto@73a000 {
compatible = "qcom,ipq9574-qce", "qcom,ipq4019-qce", "qcom,qce";
reg = <0x0073a000 0x6000>;
clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
<&gcc GCC_CRYPTO_AXI_CLK>,
<&gcc GCC_CRYPTO_CLK>;
clock-names = "iface", "bus", "core";
dmas = <&cryptobam 2>, <&cryptobam 3>;
dma-names = "rx", "tx";
};
tsens: thermal-sensor@4a9000 {
compatible = "qcom,ipq9574-tsens", "qcom,ipq8074-tsens";
reg = <0x004a9000 0x1000>,
<0x004a8000 0x1000>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "combined";
#qcom,sensors = <16>;
#thermal-sensor-cells = <1>;
};
tlmm: pinctrl@1000000 {
compatible = "qcom,ipq9574-tlmm";
reg = <0x01000000 0x300000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&tlmm 0 0 65>;
interrupt-controller;
#interrupt-cells = <2>;
uart2_pins: uart2-state {
pins = "gpio34", "gpio35";
function = "blsp2_uart";
drive-strength = <8>;
bias-disable;
};
};
gcc: clock-controller@1800000 {
compatible = "qcom,ipq9574-gcc";
reg = <0x01800000 0x80000>;
clocks = <&xo_board_clk>,
<&sleep_clk>,
<0>,
<&pcie0_phy>,
<&pcie1_phy>,
<&pcie2_phy>,
<&pcie3_phy>,
<0>;
#clock-cells = <1>;
#reset-cells = <1>;
#interconnect-cells = <1>;
};
tcsr_mutex: hwlock@1905000 {
compatible = "qcom,tcsr-mutex";
reg = <0x01905000 0x20000>;
#hwlock-cells = <1>;
};
tcsr: syscon@1937000 {
compatible = "qcom,tcsr-ipq9574", "syscon";
reg = <0x01937000 0x21000>;
};
sdhc_1: mmc@7804000 {
compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5";
reg = <0x07804000 0x1000>,
<0x07805000 0x1000>,
<0x07808000 0x2000>;
reg-names = "hc", "cqhci", "ice";
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC1_AHB_CLK>,
<&gcc GCC_SDCC1_APPS_CLK>,
<&xo_board_clk>,
<&gcc GCC_SDCC1_ICE_CORE_CLK>;
clock-names = "iface", "core", "xo", "ice";
non-removable;
supports-cqe;
status = "disabled";
};
blsp_dma: dma-controller@7884000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x07884000 0x2b000>;
interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
};
blsp1_uart0: serial@78af000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x078af000 0x200>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
blsp1_uart1: serial@78b0000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x078b0000 0x200>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
blsp1_uart2: serial@78b1000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x078b1000 0x200>;
interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
blsp1_uart3: serial@78b2000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x078b2000 0x200>;
interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
blsp1_uart4: serial@78b3000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x078b3000 0x200>;
interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
blsp1_uart5: serial@78b4000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x078b4000 0x200>;
interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART6_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
blsp1_spi0: spi@78b5000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x078b5000 0x600>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 12>, <&blsp_dma 13>;
dma-names = "tx", "rx";
status = "disabled";
};
blsp1_i2c1: i2c@78b6000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078b6000 0x600>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
assigned-clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
assigned-clock-rates = <50000000>;
dmas = <&blsp_dma 14>, <&blsp_dma 15>;
dma-names = "tx", "rx";
status = "disabled";
};
blsp1_spi1: spi@78b6000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x078b6000 0x600>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 14>, <&blsp_dma 15>;
dma-names = "tx", "rx";
status = "disabled";
};
blsp1_i2c2: i2c@78b7000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078b7000 0x600>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
assigned-clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
assigned-clock-rates = <50000000>;
dmas = <&blsp_dma 16>, <&blsp_dma 17>;
dma-names = "tx", "rx";
status = "disabled";
};
blsp1_spi2: spi@78b7000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x078b7000 0x600>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 16>, <&blsp_dma 17>;
dma-names = "tx", "rx";
status = "disabled";
};
blsp1_i2c3: i2c@78b8000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078b8000 0x600>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
assigned-clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
assigned-clock-rates = <50000000>;
dmas = <&blsp_dma 18>, <&blsp_dma 19>;
dma-names = "tx", "rx";
status = "disabled";
};
blsp1_spi3: spi@78b8000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x078b8000 0x600>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
spi-max-frequency = <50000000>;
clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 18>, <&blsp_dma 19>;
dma-names = "tx", "rx";
status = "disabled";
};
blsp1_i2c4: i2c@78b9000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x078b9000 0x600>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
assigned-clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>;
assigned-clock-rates = <50000000>;
dmas = <&blsp_dma 20>, <&blsp_dma 21>;
dma-names = "tx", "rx";
status = "disabled";
};
blsp1_spi4: spi@78b9000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x078b9000 0x600>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 20>, <&blsp_dma 21>;
dma-names = "tx", "rx";
status = "disabled";
};
qpic_bam: dma-controller@7984000 {
compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
reg = <0x07984000 0x1c000>;
interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_QPIC_AHB_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
status = "disabled";
};
qpic_nand: spi@79b0000 {
compatible = "qcom,ipq9574-snand";
reg = <0x079b0000 0x10000>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&gcc GCC_QPIC_CLK>,
<&gcc GCC_QPIC_AHB_CLK>,
<&gcc GCC_QPIC_IO_MACRO_CLK>;
clock-names = "core", "aon", "iom";
dmas = <&qpic_bam 0>,
<&qpic_bam 1>,
<&qpic_bam 2>;
dma-names = "tx", "rx", "cmd";
status = "disabled";
};
usb_0_qusbphy: phy@7b000 {
compatible = "qcom,ipq9574-qusb2-phy";
reg = <0x0007b000 0x180>;
#phy-cells = <0>;
clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
<&xo_board_clk>;
clock-names = "cfg_ahb",
"ref";
resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
status = "disabled";
};
usb_0_qmpphy: phy@7d000 {
compatible = "qcom,ipq9574-qmp-usb3-phy";
reg = <0x0007d000 0xa00>;
#phy-cells = <0>;
clocks = <&gcc GCC_USB0_AUX_CLK>,
<&xo_board_clk>,
<&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
<&gcc GCC_USB0_PIPE_CLK>;
clock-names = "aux",
"ref",
"cfg_ahb",
"pipe";
resets = <&gcc GCC_USB0_PHY_BCR>,
<&gcc GCC_USB3PHY_0_PHY_BCR>;
reset-names = "phy",
"phy_phy";
#clock-cells = <0>;
clock-output-names = "usb0_pipe_clk";
status = "disabled";
};
usb3: usb@8af8800 {
compatible = "qcom,ipq9574-dwc3", "qcom,dwc3";
reg = <0x08af8800 0x400>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
clocks = <&gcc GCC_SNOC_USB_CLK>,
<&gcc GCC_USB0_MASTER_CLK>,
<&gcc GCC_ANOC_USB_AXI_CLK>,
<&gcc GCC_USB0_SLEEP_CLK>,
<&gcc GCC_USB0_MOCK_UTMI_CLK>;
clock-names = "cfg_noc",
"core",
"iface",
"sleep",
"mock_utmi";
assigned-clocks = <&gcc GCC_USB0_MASTER_CLK>,
<&gcc GCC_USB0_MOCK_UTMI_CLK>;
assigned-clock-rates = <200000000>,
<24000000>;
interrupts-extended = <&intc GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "pwr_event";
resets = <&gcc GCC_USB_BCR>;
status = "disabled";
usb_0_dwc3: usb@8a00000 {
compatible = "snps,dwc3";
reg = <0x8a00000 0xcd00>;
clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
clock-names = "ref";
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb_0_qusbphy>, <&usb_0_qmpphy>;
phy-names = "usb2-phy", "usb3-phy";
tx-fifo-resize;
snps,is-utmi-l1-suspend;
snps,hird-threshold = /bits/ 8 <0x0>;
snps,dis_u2_susphy_quirk;
snps,dis_u3_susphy_quirk;
};
};
intc: interrupt-controller@b000000 {
compatible = "qcom,msm-qgic2";
reg = <0x0b000000 0x1000>, /* GICD */
<0x0b002000 0x2000>, /* GICC */
<0x0b001000 0x1000>, /* GICH */
<0x0b004000 0x2000>; /* GICV */
#address-cells = <1>;
#size-cells = <1>;
interrupt-controller;
#interrupt-cells = <3>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
ranges = <0 0x0b00c000 0x3000>;
v2m0: v2m@0 {
compatible = "arm,gic-v2m-frame";
reg = <0x00000000 0xffd>;
msi-controller;
};
v2m1: v2m@1000 {
compatible = "arm,gic-v2m-frame";
reg = <0x00001000 0xffd>;
msi-controller;
};
v2m2: v2m@2000 {
compatible = "arm,gic-v2m-frame";
reg = <0x00002000 0xffd>;
msi-controller;
};
};
watchdog: watchdog@b017000 {
compatible = "qcom,apss-wdt-ipq9574", "qcom,kpss-wdt";
reg = <0x0b017000 0x1000>;
interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
clocks = <&sleep_clk>;
timeout-sec = <30>;
};
apcs_glb: mailbox@b111000 {
compatible = "qcom,ipq9574-apcs-apps-global",
"qcom,ipq6018-apcs-apps-global";
reg = <0x0b111000 0x1000>;
#clock-cells = <1>;
clocks = <&a73pll>, <&xo_board_clk>, <&gcc GPLL0>;
clock-names = "pll", "xo", "gpll0";
#mbox-cells = <1>;
};
a73pll: clock@b116000 {
compatible = "qcom,ipq9574-a73pll";
reg = <0x0b116000 0x40>;
#clock-cells = <0>;
clocks = <&xo_board_clk>;
clock-names = "xo";
};
timer@b120000 {
compatible = "arm,armv7-timer-mem";
reg = <0x0b120000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
frame@b120000 {
reg = <0x0b121000 0x1000>,
<0x0b122000 0x1000>;
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
};
frame@b123000 {
reg = <0x0b123000 0x1000>;
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
frame@b124000 {
reg = <0x0b124000 0x1000>;
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
frame@b125000 {
reg = <0x0b125000 0x1000>;
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
frame@b126000 {
reg = <0x0b126000 0x1000>;
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
frame@b127000 {
reg = <0x0b127000 0x1000>;
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
frame@b128000 {
reg = <0x0b128000 0x1000>;
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
};
pcie1: pcie@10000000 {
compatible = "qcom,pcie-ipq9574";
reg = <0x10000000 0xf1d>,
<0x10000f20 0xa8>,
<0x10001000 0x1000>,
<0x000f8000 0x4000>,
<0x10100000 0x1000>,
<0x000fe000 0x1000>;
reg-names = "dbi",
"elbi",
"atu",
"parf",
"config",
"mhi";
device_type = "pci";
linux,pci-domain = <1>;
bus-range = <0x00 0xff>;
num-lanes = <1>;
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x01000000 0x0 0x00000000 0x10200000 0x0 0x100000>,
<0x02000000 0x0 0x10300000 0x10300000 0x0 0x7d00000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi0",
"msi1",
"msi2",
"msi3",
"msi4",
"msi5",
"msi6",
"msi7";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 0 35 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 2 &intc 0 0 49 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 3 &intc 0 0 84 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 4 &intc 0 0 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_PCIE1_AXI_M_CLK>,
<&gcc GCC_PCIE1_AXI_S_CLK>,
<&gcc GCC_PCIE1_AXI_S_BRIDGE_CLK>,
<&gcc GCC_PCIE1_RCHNG_CLK>,
<&gcc GCC_PCIE1_AHB_CLK>,
<&gcc GCC_PCIE1_AUX_CLK>;
clock-names = "axi_m",
"axi_s",
"axi_bridge",
"rchng",
"ahb",
"aux";
resets = <&gcc GCC_PCIE1_PIPE_ARES>,
<&gcc GCC_PCIE1_CORE_STICKY_ARES>,
<&gcc GCC_PCIE1_AXI_S_STICKY_ARES>,
<&gcc GCC_PCIE1_AXI_S_ARES>,
<&gcc GCC_PCIE1_AXI_M_STICKY_ARES>,
<&gcc GCC_PCIE1_AXI_M_ARES>,
<&gcc GCC_PCIE1_AUX_ARES>,
<&gcc GCC_PCIE1_AHB_ARES>;
reset-names = "pipe",
"sticky",
"axi_s_sticky",
"axi_s",
"axi_m_sticky",
"axi_m",
"aux",
"ahb";
phys = <&pcie1_phy>;
phy-names = "pciephy";
interconnects = <&gcc MASTER_ANOC_PCIE1 &gcc SLAVE_ANOC_PCIE1>,
<&gcc MASTER_SNOC_PCIE1 &gcc SLAVE_SNOC_PCIE1>;
interconnect-names = "pcie-mem", "cpu-pcie";
status = "disabled";
};
pcie3: pcie@18000000 {
compatible = "qcom,pcie-ipq9574";
reg = <0x18000000 0xf1d>,
<0x18000f20 0xa8>,
<0x18001000 0x1000>,
<0x000f0000 0x4000>,
<0x18100000 0x1000>,
<0x000f6000 0x1000>;
reg-names = "dbi",
"elbi",
"atu",
"parf",
"config",
"mhi";
device_type = "pci";
linux,pci-domain = <3>;
bus-range = <0x00 0xff>;
num-lanes = <2>;
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x01000000 0x0 0x00000000 0x18200000 0x0 0x100000>,
<0x02000000 0x0 0x18300000 0x18300000 0x0 0x7d00000>;
interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 494 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi0",
"msi1",
"msi2",
"msi3",
"msi4",
"msi5",
"msi6",
"msi7";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 0 189 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 2 &intc 0 0 190 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 3 &intc 0 0 191 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 4 &intc 0 0 192 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_PCIE3_AXI_M_CLK>,
<&gcc GCC_PCIE3_AXI_S_CLK>,
<&gcc GCC_PCIE3_AXI_S_BRIDGE_CLK>,
<&gcc GCC_PCIE3_RCHNG_CLK>,
<&gcc GCC_PCIE3_AHB_CLK>,
<&gcc GCC_PCIE3_AUX_CLK>;
clock-names = "axi_m",
"axi_s",
"axi_bridge",
"rchng",
"ahb",
"aux";
resets = <&gcc GCC_PCIE3_PIPE_ARES>,
<&gcc GCC_PCIE3_CORE_STICKY_ARES>,
<&gcc GCC_PCIE3_AXI_S_STICKY_ARES>,
<&gcc GCC_PCIE3_AXI_S_ARES>,
<&gcc GCC_PCIE3_AXI_M_STICKY_ARES>,
<&gcc GCC_PCIE3_AXI_M_ARES>,
<&gcc GCC_PCIE3_AUX_ARES>,
<&gcc GCC_PCIE3_AHB_ARES>;
reset-names = "pipe",
"sticky",
"axi_s_sticky",
"axi_s",
"axi_m_sticky",
"axi_m",
"aux",
"ahb";
phys = <&pcie3_phy>;
phy-names = "pciephy";
interconnects = <&gcc MASTER_ANOC_PCIE3 &gcc SLAVE_ANOC_PCIE3>,
<&gcc MASTER_SNOC_PCIE3 &gcc SLAVE_SNOC_PCIE3>;
interconnect-names = "pcie-mem", "cpu-pcie";
status = "disabled";
};
pcie2: pcie@20000000 {
compatible = "qcom,pcie-ipq9574";
reg = <0x20000000 0xf1d>,
<0x20000f20 0xa8>,
<0x20001000 0x1000>,
<0x00088000 0x4000>,
<0x20100000 0x1000>,
<0x0008e000 0x1000>;
reg-names = "dbi",
"elbi",
"atu",
"parf",
"config",
"mhi";
device_type = "pci";
linux,pci-domain = <2>;
bus-range = <0x00 0xff>;
num-lanes = <2>;
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x01000000 0x0 0x00000000 0x20200000 0x0 0x100000>,
<0x02000000 0x0 0x20300000 0x20300000 0x0 0x7d00000>;
interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi0",
"msi1",
"msi2",
"msi3",
"msi4",
"msi5",
"msi6",
"msi7";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 0 164 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 2 &intc 0 0 165 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 3 &intc 0 0 186 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 4 &intc 0 0 187 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_PCIE2_AXI_M_CLK>,
<&gcc GCC_PCIE2_AXI_S_CLK>,
<&gcc GCC_PCIE2_AXI_S_BRIDGE_CLK>,
<&gcc GCC_PCIE2_RCHNG_CLK>,
<&gcc GCC_PCIE2_AHB_CLK>,
<&gcc GCC_PCIE2_AUX_CLK>;
clock-names = "axi_m",
"axi_s",
"axi_bridge",
"rchng",
"ahb",
"aux";
resets = <&gcc GCC_PCIE2_PIPE_ARES>,
<&gcc GCC_PCIE2_CORE_STICKY_ARES>,
<&gcc GCC_PCIE2_AXI_S_STICKY_ARES>,
<&gcc GCC_PCIE2_AXI_S_ARES>,
<&gcc GCC_PCIE2_AXI_M_STICKY_ARES>,
<&gcc GCC_PCIE2_AXI_M_ARES>,
<&gcc GCC_PCIE2_AUX_ARES>,
<&gcc GCC_PCIE2_AHB_ARES>;
reset-names = "pipe",
"sticky",
"axi_s_sticky",
"axi_s",
"axi_m_sticky",
"axi_m",
"aux",
"ahb";
phys = <&pcie2_phy>;
phy-names = "pciephy";
interconnects = <&gcc MASTER_ANOC_PCIE2 &gcc SLAVE_ANOC_PCIE2>,
<&gcc MASTER_SNOC_PCIE2 &gcc SLAVE_SNOC_PCIE2>;
interconnect-names = "pcie-mem", "cpu-pcie";
status = "disabled";
};
pcie0: pci@28000000 {
compatible = "qcom,pcie-ipq9574";
reg = <0x28000000 0xf1d>,
<0x28000f20 0xa8>,
<0x28001000 0x1000>,
<0x00080000 0x4000>,
<0x28100000 0x1000>,
<0x00086000 0x1000>;
reg-names = "dbi",
"elbi",
"atu",
"parf",
"config",
"mhi";
device_type = "pci";
linux,pci-domain = <0>;
bus-range = <0x00 0xff>;
num-lanes = <1>;
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x01000000 0x0 0x00000000 0x28200000 0x0 0x100000>,
<0x02000000 0x0 0x28300000 0x28300000 0x0 0x7d00000>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi0",
"msi1",
"msi2",
"msi3",
"msi4",
"msi5",
"msi6",
"msi7";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 0 75 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 2 &intc 0 0 78 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 3 &intc 0 0 79 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 4 &intc 0 0 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_PCIE0_AXI_M_CLK>,
<&gcc GCC_PCIE0_AXI_S_CLK>,
<&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>,
<&gcc GCC_PCIE0_RCHNG_CLK>,
<&gcc GCC_PCIE0_AHB_CLK>,
<&gcc GCC_PCIE0_AUX_CLK>;
clock-names = "axi_m",
"axi_s",
"axi_bridge",
"rchng",
"ahb",
"aux";
resets = <&gcc GCC_PCIE0_PIPE_ARES>,
<&gcc GCC_PCIE0_CORE_STICKY_ARES>,
<&gcc GCC_PCIE0_AXI_S_STICKY_ARES>,
<&gcc GCC_PCIE0_AXI_S_ARES>,
<&gcc GCC_PCIE0_AXI_M_STICKY_ARES>,
<&gcc GCC_PCIE0_AXI_M_ARES>,
<&gcc GCC_PCIE0_AUX_ARES>,
<&gcc GCC_PCIE0_AHB_ARES>;
reset-names = "pipe",
"sticky",
"axi_s_sticky",
"axi_s",
"axi_m_sticky",
"axi_m",
"aux",
"ahb";
phys = <&pcie0_phy>;
phy-names = "pciephy";
interconnects = <&gcc MASTER_ANOC_PCIE0 &gcc SLAVE_ANOC_PCIE0>,
<&gcc MASTER_SNOC_PCIE0 &gcc SLAVE_SNOC_PCIE0>;
interconnect-names = "pcie-mem", "cpu-pcie";
status = "disabled";
};
nsscc: clock-controller@39b00000 {
compatible = "qcom,ipq9574-nsscc";
reg = <0x39b00000 0x80000>;
clocks = <&xo_board_clk>,
<&cmn_pll NSS_1200MHZ_CLK>,
<&cmn_pll PPE_353MHZ_CLK>,
<&gcc GPLL0_OUT_AUX>,
<0>,
<0>,
<0>,
<0>,
<0>,
<0>,
<&gcc GCC_NSSCC_CLK>;
clock-names = "xo",
"nss_1200",
"ppe_353",
"gpll0_out",
"uniphy0_rx",
"uniphy0_tx",
"uniphy1_rx",
"uniphy1_tx",
"uniphy2_rx",
"uniphy2_tx",
"bus";
#clock-cells = <1>;
#reset-cells = <1>;
#interconnect-cells = <1>;
};
};
thermal-zones {
nss-top-thermal {
thermal-sensors = <&tsens 3>;
trips {
nss-top-critical {
temperature = <125000>;
hysteresis = <1000>;
type = "critical";
};
};
};
ubi-0-thermal {
thermal-sensors = <&tsens 4>;
trips {
ubi_0-critical {
temperature = <125000>;
hysteresis = <1000>;
type = "critical";
};
};
};
ubi-1-thermal {
thermal-sensors = <&tsens 5>;
trips {
ubi_1-critical {
temperature = <125000>;
hysteresis = <1000>;
type = "critical";
};
};
};
ubi-2-thermal {
thermal-sensors = <&tsens 6>;
trips {
ubi_2-critical {
temperature = <125000>;
hysteresis = <1000>;
type = "critical";
};
};
};
ubi-3-thermal {
thermal-sensors = <&tsens 7>;
trips {
ubi_3-critical {
temperature = <125000>;
hysteresis = <1000>;
type = "critical";
};
};
};
cpuss0-thermal {
thermal-sensors = <&tsens 8>;
trips {
cpu-critical {
temperature = <125000>;
hysteresis = <1000>;
type = "critical";
};
};
};
cpuss1-thermal {
thermal-sensors = <&tsens 9>;
trips {
cpu-critical {
temperature = <125000>;
hysteresis = <1000>;
type = "critical";
};
};
};
cpu0-thermal {
thermal-sensors = <&tsens 10>;
trips {
cpu0_crit: cpu-critical {
temperature = <120000>;
hysteresis = <10000>;
type = "critical";
};
cpu0_alert: cpu-passive {
temperature = <110000>;
hysteresis = <1000>;
type = "passive";
};
};
cooling-maps {
map0 {
trip = <&cpu0_alert>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu1-thermal {
thermal-sensors = <&tsens 11>;
trips {
cpu1_crit: cpu-critical {
temperature = <120000>;
hysteresis = <10000>;
type = "critical";
};
cpu1_alert: cpu-passive {
temperature = <110000>;
hysteresis = <1000>;
type = "passive";
};
};
cooling-maps {
map0 {
trip = <&cpu1_alert>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu2-thermal {
thermal-sensors = <&tsens 12>;
trips {
cpu2_crit: cpu-critical {
temperature = <120000>;
hysteresis = <10000>;
type = "critical";
};
cpu2_alert: cpu-passive {
temperature = <110000>;
hysteresis = <1000>;
type = "passive";
};
};
cooling-maps {
map0 {
trip = <&cpu2_alert>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu3-thermal {
thermal-sensors = <&tsens 13>;
trips {
cpu3_crit: cpu-critical {
temperature = <120000>;
hysteresis = <10000>;
type = "critical";
};
cpu3_alert: cpu-passive {
temperature = <110000>;
hysteresis = <1000>;
type = "passive";
};
};
cooling-maps {
map0 {
trip = <&cpu3_alert>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
wcss-phyb-thermal {
thermal-sensors = <&tsens 14>;
trips {
wcss_phyb-critical {
temperature = <125000>;
hysteresis = <1000>;
type = "critical";
};
};
};
top-glue-thermal {
thermal-sensors = <&tsens 15>;
trips {
top_glue-critical {
temperature = <125000>;
hysteresis = <1000>;
type = "critical";
};
};
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
};