Book a Demo!
CoCalc Logo Icon
StoreFeaturesDocsShareSupportNewsAboutPoliciesSign UpSign In
torvalds
GitHub Repository: torvalds/linux
Path: blob/master/arch/sh/boards/mach-kfr2r09/setup.c
26490 views
1
// SPDX-License-Identifier: GPL-2.0
2
/*
3
* KFR2R09 board support code
4
*
5
* Copyright (C) 2009 Magnus Damm
6
*/
7
8
#include <asm/clock.h>
9
#include <asm/io.h>
10
#include <asm/machvec.h>
11
#include <asm/suspend.h>
12
13
#include <cpu/sh7724.h>
14
15
#include <linux/clkdev.h>
16
#include <linux/delay.h>
17
#include <linux/gpio.h>
18
#include <linux/gpio/machine.h>
19
#include <linux/i2c.h>
20
#include <linux/init.h>
21
#include <linux/input.h>
22
#include <linux/input/sh_keysc.h>
23
#include <linux/interrupt.h>
24
#include <linux/memblock.h>
25
#include <linux/mmc/host.h>
26
#include <linux/mtd/physmap.h>
27
#include <linux/platform_data/lv5207lp.h>
28
#include <linux/platform_data/tmio.h>
29
#include <linux/platform_device.h>
30
#include <linux/regulator/fixed.h>
31
#include <linux/regulator/machine.h>
32
#include <linux/sh_intc.h>
33
#include <linux/usb/r8a66597.h>
34
#include <linux/videodev2.h>
35
#include <linux/dma-map-ops.h>
36
37
#include <mach/kfr2r09.h>
38
39
#include <media/drv-intf/renesas-ceu.h>
40
#include <media/i2c/rj54n1cb0c.h>
41
42
#include <video/sh_mobile_lcdc.h>
43
44
#define CEU_BUFFER_MEMORY_SIZE (4 << 20)
45
static phys_addr_t ceu_dma_membase;
46
47
/* set VIO_CKO clock to 25MHz */
48
#define CEU_MCLK_FREQ 25000000
49
#define DRVCRB 0xA405018C
50
51
static struct mtd_partition kfr2r09_nor_flash_partitions[] =
52
{
53
{
54
.name = "boot",
55
.offset = 0,
56
.size = (4 * 1024 * 1024),
57
.mask_flags = MTD_WRITEABLE, /* Read-only */
58
},
59
{
60
.name = "other",
61
.offset = MTDPART_OFS_APPEND,
62
.size = MTDPART_SIZ_FULL,
63
},
64
};
65
66
static struct physmap_flash_data kfr2r09_nor_flash_data = {
67
.width = 2,
68
.parts = kfr2r09_nor_flash_partitions,
69
.nr_parts = ARRAY_SIZE(kfr2r09_nor_flash_partitions),
70
};
71
72
static struct resource kfr2r09_nor_flash_resources[] = {
73
[0] = {
74
.name = "NOR Flash",
75
.start = 0x00000000,
76
.end = 0x03ffffff,
77
.flags = IORESOURCE_MEM,
78
}
79
};
80
81
static struct platform_device kfr2r09_nor_flash_device = {
82
.name = "physmap-flash",
83
.resource = kfr2r09_nor_flash_resources,
84
.num_resources = ARRAY_SIZE(kfr2r09_nor_flash_resources),
85
.dev = {
86
.platform_data = &kfr2r09_nor_flash_data,
87
},
88
};
89
90
static struct resource kfr2r09_nand_flash_resources[] = {
91
[0] = {
92
.name = "NAND Flash",
93
.start = 0x10000000,
94
.end = 0x1001ffff,
95
.flags = IORESOURCE_MEM,
96
}
97
};
98
99
static struct platform_device kfr2r09_nand_flash_device = {
100
.name = "onenand-flash",
101
.resource = kfr2r09_nand_flash_resources,
102
.num_resources = ARRAY_SIZE(kfr2r09_nand_flash_resources),
103
};
104
105
static struct sh_keysc_info kfr2r09_sh_keysc_info = {
106
.mode = SH_KEYSC_MODE_1, /* KEYOUT0->4, KEYIN0->4 */
107
.scan_timing = 3,
108
.delay = 10,
109
.keycodes = {
110
KEY_PHONE, KEY_CLEAR, KEY_MAIL, KEY_WWW, KEY_ENTER,
111
KEY_1, KEY_2, KEY_3, 0, KEY_UP,
112
KEY_4, KEY_5, KEY_6, 0, KEY_LEFT,
113
KEY_7, KEY_8, KEY_9, KEY_PROG1, KEY_RIGHT,
114
KEY_S, KEY_0, KEY_P, KEY_PROG2, KEY_DOWN,
115
0, 0, 0, 0, 0
116
},
117
};
118
119
static struct resource kfr2r09_sh_keysc_resources[] = {
120
[0] = {
121
.name = "KEYSC",
122
.start = 0x044b0000,
123
.end = 0x044b000f,
124
.flags = IORESOURCE_MEM,
125
},
126
[1] = {
127
.start = evt2irq(0xbe0),
128
.flags = IORESOURCE_IRQ,
129
},
130
};
131
132
static struct platform_device kfr2r09_sh_keysc_device = {
133
.name = "sh_keysc",
134
.id = 0, /* "keysc0" clock */
135
.num_resources = ARRAY_SIZE(kfr2r09_sh_keysc_resources),
136
.resource = kfr2r09_sh_keysc_resources,
137
.dev = {
138
.platform_data = &kfr2r09_sh_keysc_info,
139
},
140
};
141
142
static const struct fb_videomode kfr2r09_lcdc_modes[] = {
143
{
144
.name = "TX07D34VM0AAA",
145
.xres = 240,
146
.yres = 400,
147
.left_margin = 0,
148
.right_margin = 16,
149
.hsync_len = 8,
150
.upper_margin = 0,
151
.lower_margin = 1,
152
.vsync_len = 1,
153
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
154
},
155
};
156
157
static struct sh_mobile_lcdc_info kfr2r09_sh_lcdc_info = {
158
.clock_source = LCDC_CLK_BUS,
159
.ch[0] = {
160
.chan = LCDC_CHAN_MAINLCD,
161
.fourcc = V4L2_PIX_FMT_RGB565,
162
.interface_type = SYS18,
163
.clock_divider = 6,
164
.flags = LCDC_FLAGS_DWPOL,
165
.lcd_modes = kfr2r09_lcdc_modes,
166
.num_modes = ARRAY_SIZE(kfr2r09_lcdc_modes),
167
.panel_cfg = {
168
.width = 35,
169
.height = 58,
170
.setup_sys = kfr2r09_lcd_setup,
171
.start_transfer = kfr2r09_lcd_start,
172
},
173
.sys_bus_cfg = {
174
.ldmt2r = 0x07010904,
175
.ldmt3r = 0x14012914,
176
/* set 1s delay to encourage fsync() */
177
.deferred_io_msec = 1000,
178
},
179
}
180
};
181
182
static struct resource kfr2r09_sh_lcdc_resources[] = {
183
[0] = {
184
.name = "LCDC",
185
.start = 0xfe940000, /* P4-only space */
186
.end = 0xfe942fff,
187
.flags = IORESOURCE_MEM,
188
},
189
[1] = {
190
.start = evt2irq(0xf40),
191
.flags = IORESOURCE_IRQ,
192
},
193
};
194
195
static struct platform_device kfr2r09_sh_lcdc_device = {
196
.name = "sh_mobile_lcdc_fb",
197
.num_resources = ARRAY_SIZE(kfr2r09_sh_lcdc_resources),
198
.resource = kfr2r09_sh_lcdc_resources,
199
.dev = {
200
.platform_data = &kfr2r09_sh_lcdc_info,
201
},
202
};
203
204
static struct lv5207lp_platform_data kfr2r09_backlight_data = {
205
.dev = &kfr2r09_sh_lcdc_device.dev,
206
.def_value = 13,
207
.max_value = 13,
208
};
209
210
static struct i2c_board_info kfr2r09_backlight_board_info = {
211
I2C_BOARD_INFO("lv5207lp", 0x75),
212
.platform_data = &kfr2r09_backlight_data,
213
};
214
215
static struct r8a66597_platdata kfr2r09_usb0_gadget_data = {
216
.on_chip = 1,
217
};
218
219
static struct resource kfr2r09_usb0_gadget_resources[] = {
220
[0] = {
221
.start = 0x04d80000,
222
.end = 0x04d80123,
223
.flags = IORESOURCE_MEM,
224
},
225
[1] = {
226
.start = evt2irq(0xa20),
227
.end = evt2irq(0xa20),
228
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
229
},
230
};
231
232
static struct platform_device kfr2r09_usb0_gadget_device = {
233
.name = "r8a66597_udc",
234
.id = 0,
235
.dev = {
236
.dma_mask = NULL, /* not use dma */
237
.coherent_dma_mask = 0xffffffff,
238
.platform_data = &kfr2r09_usb0_gadget_data,
239
},
240
.num_resources = ARRAY_SIZE(kfr2r09_usb0_gadget_resources),
241
.resource = kfr2r09_usb0_gadget_resources,
242
};
243
244
static struct ceu_platform_data ceu_pdata = {
245
.num_subdevs = 1,
246
.subdevs = {
247
{ /* [0] = rj54n1cb0c */
248
.flags = 0,
249
.bus_width = 8,
250
.bus_shift = 0,
251
.i2c_adapter_id = 1,
252
.i2c_address = 0x50,
253
},
254
},
255
};
256
257
static struct resource kfr2r09_ceu_resources[] = {
258
[0] = {
259
.name = "CEU",
260
.start = 0xfe910000,
261
.end = 0xfe91009f,
262
.flags = IORESOURCE_MEM,
263
},
264
[1] = {
265
.start = evt2irq(0x880),
266
.end = evt2irq(0x880),
267
.flags = IORESOURCE_IRQ,
268
},
269
};
270
271
static struct platform_device kfr2r09_ceu_device = {
272
.name = "renesas-ceu",
273
.id = 0, /* "ceu0" clock */
274
.num_resources = ARRAY_SIZE(kfr2r09_ceu_resources),
275
.resource = kfr2r09_ceu_resources,
276
.dev = {
277
.platform_data = &ceu_pdata,
278
},
279
};
280
281
static struct rj54n1_pdata rj54n1_priv = {
282
.mclk_freq = CEU_MCLK_FREQ,
283
.ioctl_high = false,
284
};
285
286
static struct i2c_board_info kfr2r09_i2c_camera = {
287
I2C_BOARD_INFO("rj54n1cb0c", 0x50),
288
.platform_data = &rj54n1_priv,
289
};
290
291
static struct gpiod_lookup_table rj54n1_gpios = {
292
.dev_id = "1-0050",
293
.table = {
294
GPIO_LOOKUP("sh7724_pfc", GPIO_PTB4, "poweron",
295
GPIO_ACTIVE_HIGH),
296
GPIO_LOOKUP("sh7724_pfc", GPIO_PTB7, "enable",
297
GPIO_ACTIVE_HIGH),
298
},
299
};
300
301
/* Fixed 3.3V regulator to be used by SDHI0 */
302
static struct regulator_consumer_supply fixed3v3_power_consumers[] =
303
{
304
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
305
REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
306
};
307
308
static struct resource kfr2r09_sh_sdhi0_resources[] = {
309
[0] = {
310
.name = "SDHI0",
311
.start = 0x04ce0000,
312
.end = 0x04ce00ff,
313
.flags = IORESOURCE_MEM,
314
},
315
[1] = {
316
.start = evt2irq(0xe80),
317
.flags = IORESOURCE_IRQ,
318
},
319
};
320
321
static struct tmio_mmc_data sh7724_sdhi0_data = {
322
.chan_priv_tx = (void *)SHDMA_SLAVE_SDHI0_TX,
323
.chan_priv_rx = (void *)SHDMA_SLAVE_SDHI0_RX,
324
.capabilities = MMC_CAP_SDIO_IRQ,
325
.capabilities2 = MMC_CAP2_NO_WRITE_PROTECT,
326
};
327
328
static struct platform_device kfr2r09_sh_sdhi0_device = {
329
.name = "sh_mobile_sdhi",
330
.num_resources = ARRAY_SIZE(kfr2r09_sh_sdhi0_resources),
331
.resource = kfr2r09_sh_sdhi0_resources,
332
.dev = {
333
.platform_data = &sh7724_sdhi0_data,
334
},
335
};
336
337
static struct platform_device *kfr2r09_devices[] __initdata = {
338
&kfr2r09_nor_flash_device,
339
&kfr2r09_nand_flash_device,
340
&kfr2r09_sh_keysc_device,
341
&kfr2r09_sh_lcdc_device,
342
&kfr2r09_sh_sdhi0_device,
343
};
344
345
#define BSC_CS0BCR 0xfec10004
346
#define BSC_CS0WCR 0xfec10024
347
#define BSC_CS4BCR 0xfec10010
348
#define BSC_CS4WCR 0xfec10030
349
#define PORT_MSELCRB 0xa4050182
350
351
#ifdef CONFIG_I2C
352
static int kfr2r09_usb0_gadget_i2c_setup(void)
353
{
354
struct i2c_adapter *a;
355
struct i2c_msg msg;
356
unsigned char buf[2];
357
int ret;
358
359
a = i2c_get_adapter(0);
360
if (!a)
361
return -ENODEV;
362
363
/* set bit 1 (the second bit) of chip at 0x09, register 0x13 */
364
buf[0] = 0x13;
365
msg.addr = 0x09;
366
msg.buf = buf;
367
msg.len = 1;
368
msg.flags = 0;
369
ret = i2c_transfer(a, &msg, 1);
370
if (ret != 1)
371
return -ENODEV;
372
373
buf[0] = 0;
374
msg.addr = 0x09;
375
msg.buf = buf;
376
msg.len = 1;
377
msg.flags = I2C_M_RD;
378
ret = i2c_transfer(a, &msg, 1);
379
if (ret != 1)
380
return -ENODEV;
381
382
buf[1] = buf[0] | (1 << 1);
383
buf[0] = 0x13;
384
msg.addr = 0x09;
385
msg.buf = buf;
386
msg.len = 2;
387
msg.flags = 0;
388
ret = i2c_transfer(a, &msg, 1);
389
if (ret != 1)
390
return -ENODEV;
391
392
return 0;
393
}
394
395
static int kfr2r09_serial_i2c_setup(void)
396
{
397
struct i2c_adapter *a;
398
struct i2c_msg msg;
399
unsigned char buf[2];
400
int ret;
401
402
a = i2c_get_adapter(0);
403
if (!a)
404
return -ENODEV;
405
406
/* set bit 6 (the 7th bit) of chip at 0x09, register 0x13 */
407
buf[0] = 0x13;
408
msg.addr = 0x09;
409
msg.buf = buf;
410
msg.len = 1;
411
msg.flags = 0;
412
ret = i2c_transfer(a, &msg, 1);
413
if (ret != 1)
414
return -ENODEV;
415
416
buf[0] = 0;
417
msg.addr = 0x09;
418
msg.buf = buf;
419
msg.len = 1;
420
msg.flags = I2C_M_RD;
421
ret = i2c_transfer(a, &msg, 1);
422
if (ret != 1)
423
return -ENODEV;
424
425
buf[1] = buf[0] | (1 << 6);
426
buf[0] = 0x13;
427
msg.addr = 0x09;
428
msg.buf = buf;
429
msg.len = 2;
430
msg.flags = 0;
431
ret = i2c_transfer(a, &msg, 1);
432
if (ret != 1)
433
return -ENODEV;
434
435
return 0;
436
}
437
#else
438
static int kfr2r09_usb0_gadget_i2c_setup(void)
439
{
440
return -ENODEV;
441
}
442
443
static int kfr2r09_serial_i2c_setup(void)
444
{
445
return -ENODEV;
446
}
447
#endif
448
449
static int kfr2r09_usb0_gadget_setup(void)
450
{
451
int plugged_in;
452
453
gpio_request(GPIO_PTN4, NULL); /* USB_DET */
454
gpio_direction_input(GPIO_PTN4);
455
plugged_in = gpio_get_value(GPIO_PTN4);
456
if (!plugged_in)
457
return -ENODEV; /* no cable plugged in */
458
459
if (kfr2r09_usb0_gadget_i2c_setup() != 0)
460
return -ENODEV; /* unable to configure using i2c */
461
462
__raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
463
gpio_request(GPIO_FN_PDSTATUS, NULL); /* R-standby disables USB clock */
464
gpio_request(GPIO_PTV6, NULL); /* USBCLK_ON */
465
gpio_direction_output(GPIO_PTV6, 1); /* USBCLK_ON = H */
466
msleep(20); /* wait 20ms to let the clock settle */
467
clk_enable(clk_get(NULL, "usb0"));
468
__raw_writew(0x0600, 0xa40501d4);
469
470
return 0;
471
}
472
473
extern char kfr2r09_sdram_enter_start;
474
extern char kfr2r09_sdram_enter_end;
475
extern char kfr2r09_sdram_leave_start;
476
extern char kfr2r09_sdram_leave_end;
477
478
static int __init kfr2r09_devices_setup(void)
479
{
480
struct clk *camera_clk;
481
482
/* register board specific self-refresh code */
483
sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
484
SUSP_SH_RSTANDBY,
485
&kfr2r09_sdram_enter_start,
486
&kfr2r09_sdram_enter_end,
487
&kfr2r09_sdram_leave_start,
488
&kfr2r09_sdram_leave_end);
489
490
regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
491
ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
492
493
/* enable SCIF1 serial port for YC401 console support */
494
gpio_request(GPIO_FN_SCIF1_RXD, NULL);
495
gpio_request(GPIO_FN_SCIF1_TXD, NULL);
496
kfr2r09_serial_i2c_setup(); /* ECONTMSK(bit6=L10ONEN) set 1 */
497
gpio_request(GPIO_PTG3, NULL); /* HPON_ON */
498
gpio_direction_output(GPIO_PTG3, 1); /* HPON_ON = H */
499
500
/* setup NOR flash at CS0 */
501
__raw_writel(0x36db0400, BSC_CS0BCR);
502
__raw_writel(0x00000500, BSC_CS0WCR);
503
504
/* setup NAND flash at CS4 */
505
__raw_writel(0x36db0400, BSC_CS4BCR);
506
__raw_writel(0x00000500, BSC_CS4WCR);
507
508
/* setup KEYSC pins */
509
gpio_request(GPIO_FN_KEYOUT0, NULL);
510
gpio_request(GPIO_FN_KEYOUT1, NULL);
511
gpio_request(GPIO_FN_KEYOUT2, NULL);
512
gpio_request(GPIO_FN_KEYOUT3, NULL);
513
gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
514
gpio_request(GPIO_FN_KEYIN0, NULL);
515
gpio_request(GPIO_FN_KEYIN1, NULL);
516
gpio_request(GPIO_FN_KEYIN2, NULL);
517
gpio_request(GPIO_FN_KEYIN3, NULL);
518
gpio_request(GPIO_FN_KEYIN4, NULL);
519
gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
520
521
/* setup LCDC pins for SYS panel */
522
gpio_request(GPIO_FN_LCDD17, NULL);
523
gpio_request(GPIO_FN_LCDD16, NULL);
524
gpio_request(GPIO_FN_LCDD15, NULL);
525
gpio_request(GPIO_FN_LCDD14, NULL);
526
gpio_request(GPIO_FN_LCDD13, NULL);
527
gpio_request(GPIO_FN_LCDD12, NULL);
528
gpio_request(GPIO_FN_LCDD11, NULL);
529
gpio_request(GPIO_FN_LCDD10, NULL);
530
gpio_request(GPIO_FN_LCDD9, NULL);
531
gpio_request(GPIO_FN_LCDD8, NULL);
532
gpio_request(GPIO_FN_LCDD7, NULL);
533
gpio_request(GPIO_FN_LCDD6, NULL);
534
gpio_request(GPIO_FN_LCDD5, NULL);
535
gpio_request(GPIO_FN_LCDD4, NULL);
536
gpio_request(GPIO_FN_LCDD3, NULL);
537
gpio_request(GPIO_FN_LCDD2, NULL);
538
gpio_request(GPIO_FN_LCDD1, NULL);
539
gpio_request(GPIO_FN_LCDD0, NULL);
540
gpio_request(GPIO_FN_LCDRS, NULL); /* LCD_RS */
541
gpio_request(GPIO_FN_LCDCS, NULL); /* LCD_CS/ */
542
gpio_request(GPIO_FN_LCDRD, NULL); /* LCD_RD/ */
543
gpio_request(GPIO_FN_LCDWR, NULL); /* LCD_WR/ */
544
gpio_request(GPIO_FN_LCDVSYN, NULL); /* LCD_VSYNC */
545
gpio_request(GPIO_PTE4, NULL); /* LCD_RST/ */
546
gpio_direction_output(GPIO_PTE4, 1);
547
gpio_request(GPIO_PTF4, NULL); /* PROTECT/ */
548
gpio_direction_output(GPIO_PTF4, 1);
549
gpio_request(GPIO_PTU0, NULL); /* LEDSTDBY/ */
550
gpio_direction_output(GPIO_PTU0, 1);
551
552
/* setup USB function */
553
if (kfr2r09_usb0_gadget_setup() == 0)
554
platform_device_register(&kfr2r09_usb0_gadget_device);
555
556
/* CEU */
557
gpio_request(GPIO_FN_VIO_CKO, NULL);
558
gpio_request(GPIO_FN_VIO0_CLK, NULL);
559
gpio_request(GPIO_FN_VIO0_VD, NULL);
560
gpio_request(GPIO_FN_VIO0_HD, NULL);
561
gpio_request(GPIO_FN_VIO0_FLD, NULL);
562
gpio_request(GPIO_FN_VIO0_D7, NULL);
563
gpio_request(GPIO_FN_VIO0_D6, NULL);
564
gpio_request(GPIO_FN_VIO0_D5, NULL);
565
gpio_request(GPIO_FN_VIO0_D4, NULL);
566
gpio_request(GPIO_FN_VIO0_D3, NULL);
567
gpio_request(GPIO_FN_VIO0_D2, NULL);
568
gpio_request(GPIO_FN_VIO0_D1, NULL);
569
gpio_request(GPIO_FN_VIO0_D0, NULL);
570
571
/* SDHI0 connected to yc304 */
572
gpio_request(GPIO_FN_SDHI0CD, NULL);
573
gpio_request(GPIO_FN_SDHI0D3, NULL);
574
gpio_request(GPIO_FN_SDHI0D2, NULL);
575
gpio_request(GPIO_FN_SDHI0D1, NULL);
576
gpio_request(GPIO_FN_SDHI0D0, NULL);
577
gpio_request(GPIO_FN_SDHI0CMD, NULL);
578
gpio_request(GPIO_FN_SDHI0CLK, NULL);
579
580
i2c_register_board_info(0, &kfr2r09_backlight_board_info, 1);
581
582
/* Set camera clock frequency and register and alias for rj54n1. */
583
camera_clk = clk_get(NULL, "video_clk");
584
if (!IS_ERR(camera_clk)) {
585
clk_set_rate(camera_clk,
586
clk_round_rate(camera_clk, CEU_MCLK_FREQ));
587
clk_put(camera_clk);
588
}
589
clk_add_alias(NULL, "1-0050", "video_clk", NULL);
590
591
/* set DRVCRB
592
*
593
* use 1.8 V for VccQ_VIO
594
* use 2.85V for VccQ_SR
595
*/
596
__raw_writew((__raw_readw(DRVCRB) & ~0x0003) | 0x0001, DRVCRB);
597
598
gpiod_add_lookup_table(&rj54n1_gpios);
599
600
i2c_register_board_info(1, &kfr2r09_i2c_camera, 1);
601
602
/* Initialize CEU platform device separately to map memory first */
603
device_initialize(&kfr2r09_ceu_device.dev);
604
dma_declare_coherent_memory(&kfr2r09_ceu_device.dev,
605
ceu_dma_membase, ceu_dma_membase,
606
CEU_BUFFER_MEMORY_SIZE);
607
608
platform_device_add(&kfr2r09_ceu_device);
609
610
return platform_add_devices(kfr2r09_devices,
611
ARRAY_SIZE(kfr2r09_devices));
612
}
613
device_initcall(kfr2r09_devices_setup);
614
615
/* Return the board specific boot mode pin configuration */
616
static int kfr2r09_mode_pins(void)
617
{
618
/* MD0=1, MD1=1, MD2=0: Clock Mode 3
619
* MD3=0: 16-bit Area0 Bus Width
620
* MD5=1: Little Endian
621
* MD8=1: Test Mode Disabled
622
*/
623
return MODE_PIN0 | MODE_PIN1 | MODE_PIN5 | MODE_PIN8;
624
}
625
626
/* Reserve a portion of memory for CEU buffers */
627
static void __init kfr2r09_mv_mem_reserve(void)
628
{
629
phys_addr_t phys;
630
phys_addr_t size = CEU_BUFFER_MEMORY_SIZE;
631
632
phys = memblock_phys_alloc(size, PAGE_SIZE);
633
if (!phys)
634
panic("Failed to allocate CEU memory\n");
635
636
memblock_phys_free(phys, size);
637
memblock_remove(phys, size);
638
639
ceu_dma_membase = phys;
640
}
641
642
/*
643
* The Machine Vector
644
*/
645
static struct sh_machine_vector mv_kfr2r09 __initmv = {
646
.mv_name = "kfr2r09",
647
.mv_mode_pins = kfr2r09_mode_pins,
648
.mv_mem_reserve = kfr2r09_mv_mem_reserve,
649
};
650
651