Book a Demo!
CoCalc Logo Icon
StoreFeaturesDocsShareSupportNewsAboutPoliciesSign UpSign In
torvalds
GitHub Repository: torvalds/linux
Path: blob/master/drivers/char/pc8736x_gpio.c
26278 views
1
// SPDX-License-Identifier: GPL-2.0-only
2
/* linux/drivers/char/pc8736x_gpio.c
3
4
National Semiconductor PC8736x GPIO driver. Allows a user space
5
process to play with the GPIO pins.
6
7
Copyright (c) 2005,2006 Jim Cromie <[email protected]>
8
9
adapted from linux/drivers/char/scx200_gpio.c
10
Copyright (c) 2001,2002 Christer Weinigel <[email protected]>,
11
*/
12
13
#include <linux/fs.h>
14
#include <linux/module.h>
15
#include <linux/errno.h>
16
#include <linux/kernel.h>
17
#include <linux/init.h>
18
#include <linux/cdev.h>
19
#include <linux/io.h>
20
#include <linux/ioport.h>
21
#include <linux/mutex.h>
22
#include <linux/nsc_gpio.h>
23
#include <linux/platform_device.h>
24
#include <linux/uaccess.h>
25
26
#define DEVNAME "pc8736x_gpio"
27
28
MODULE_AUTHOR("Jim Cromie <[email protected]>");
29
MODULE_DESCRIPTION("NatSemi/Winbond PC-8736x GPIO Pin Driver");
30
MODULE_LICENSE("GPL");
31
32
static int major; /* default to dynamic major */
33
module_param(major, int, 0);
34
MODULE_PARM_DESC(major, "Major device number");
35
36
static DEFINE_MUTEX(pc8736x_gpio_config_lock);
37
static unsigned pc8736x_gpio_base;
38
static u8 pc8736x_gpio_shadow[4];
39
40
#define SIO_BASE1 0x2E /* 1st command-reg to check */
41
#define SIO_BASE2 0x4E /* alt command-reg to check */
42
43
#define SIO_SID 0x20 /* SuperI/O ID Register */
44
#define SIO_SID_PC87365 0xe5 /* Expected value in ID Register for PC87365 */
45
#define SIO_SID_PC87366 0xe9 /* Expected value in ID Register for PC87366 */
46
47
#define SIO_CF1 0x21 /* chip config, bit0 is chip enable */
48
49
#define PC8736X_GPIO_RANGE 16 /* ioaddr range */
50
#define PC8736X_GPIO_CT 32 /* minors matching 4 8 bit ports */
51
52
#define SIO_UNIT_SEL 0x7 /* unit select reg */
53
#define SIO_UNIT_ACT 0x30 /* unit enable */
54
#define SIO_GPIO_UNIT 0x7 /* unit number of GPIO */
55
#define SIO_VLM_UNIT 0x0D
56
#define SIO_TMS_UNIT 0x0E
57
58
/* config-space addrs to read/write each unit's runtime addr */
59
#define SIO_BASE_HADDR 0x60
60
#define SIO_BASE_LADDR 0x61
61
62
/* GPIO config-space pin-control addresses */
63
#define SIO_GPIO_PIN_SELECT 0xF0
64
#define SIO_GPIO_PIN_CONFIG 0xF1
65
#define SIO_GPIO_PIN_EVENT 0xF2
66
67
static unsigned char superio_cmd = 0;
68
static unsigned char selected_device = 0xFF; /* bogus start val */
69
70
/* GPIO port runtime access, functionality */
71
static int port_offset[] = { 0, 4, 8, 10 }; /* non-uniform offsets ! */
72
/* static int event_capable[] = { 1, 1, 0, 0 }; ports 2,3 are hobbled */
73
74
#define PORT_OUT 0
75
#define PORT_IN 1
76
#define PORT_EVT_EN 2
77
#define PORT_EVT_STST 3
78
79
static struct platform_device *pdev; /* use in dev_*() */
80
81
static inline void superio_outb(int addr, int val)
82
{
83
outb_p(addr, superio_cmd);
84
outb_p(val, superio_cmd + 1);
85
}
86
87
static inline int superio_inb(int addr)
88
{
89
outb_p(addr, superio_cmd);
90
return inb_p(superio_cmd + 1);
91
}
92
93
static int pc8736x_superio_present(void)
94
{
95
int id;
96
97
/* try the 2 possible values, read a hardware reg to verify */
98
superio_cmd = SIO_BASE1;
99
id = superio_inb(SIO_SID);
100
if (id == SIO_SID_PC87365 || id == SIO_SID_PC87366)
101
return superio_cmd;
102
103
superio_cmd = SIO_BASE2;
104
id = superio_inb(SIO_SID);
105
if (id == SIO_SID_PC87365 || id == SIO_SID_PC87366)
106
return superio_cmd;
107
108
return 0;
109
}
110
111
static void device_select(unsigned devldn)
112
{
113
superio_outb(SIO_UNIT_SEL, devldn);
114
selected_device = devldn;
115
}
116
117
static void select_pin(unsigned iminor)
118
{
119
/* select GPIO port/pin from device minor number */
120
device_select(SIO_GPIO_UNIT);
121
superio_outb(SIO_GPIO_PIN_SELECT,
122
((iminor << 1) & 0xF0) | (iminor & 0x7));
123
}
124
125
static inline u32 pc8736x_gpio_configure_fn(unsigned index, u32 mask, u32 bits,
126
u32 func_slct)
127
{
128
u32 config, new_config;
129
130
mutex_lock(&pc8736x_gpio_config_lock);
131
132
device_select(SIO_GPIO_UNIT);
133
select_pin(index);
134
135
/* read current config value */
136
config = superio_inb(func_slct);
137
138
/* set new config */
139
new_config = (config & mask) | bits;
140
superio_outb(func_slct, new_config);
141
142
mutex_unlock(&pc8736x_gpio_config_lock);
143
144
return config;
145
}
146
147
static u32 pc8736x_gpio_configure(unsigned index, u32 mask, u32 bits)
148
{
149
return pc8736x_gpio_configure_fn(index, mask, bits,
150
SIO_GPIO_PIN_CONFIG);
151
}
152
153
static int pc8736x_gpio_get(unsigned minor)
154
{
155
int port, bit, val;
156
157
port = minor >> 3;
158
bit = minor & 7;
159
val = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_IN);
160
val >>= bit;
161
val &= 1;
162
163
dev_dbg(&pdev->dev, "_gpio_get(%d from %x bit %d) == val %d\n",
164
minor, pc8736x_gpio_base + port_offset[port] + PORT_IN, bit,
165
val);
166
167
return val;
168
}
169
170
static void pc8736x_gpio_set(unsigned minor, int val)
171
{
172
int port, bit, curval;
173
174
minor &= 0x1f;
175
port = minor >> 3;
176
bit = minor & 7;
177
curval = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_OUT);
178
179
dev_dbg(&pdev->dev, "addr:%x cur:%x bit-pos:%d cur-bit:%x + new:%d -> bit-new:%d\n",
180
pc8736x_gpio_base + port_offset[port] + PORT_OUT,
181
curval, bit, (curval & ~(1 << bit)), val, (val << bit));
182
183
val = (curval & ~(1 << bit)) | (val << bit);
184
185
dev_dbg(&pdev->dev, "gpio_set(minor:%d port:%d bit:%d)"
186
" %2x -> %2x\n", minor, port, bit, curval, val);
187
188
outb_p(val, pc8736x_gpio_base + port_offset[port] + PORT_OUT);
189
190
curval = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_OUT);
191
val = inb_p(pc8736x_gpio_base + port_offset[port] + PORT_IN);
192
193
dev_dbg(&pdev->dev, "wrote %x, read: %x\n", curval, val);
194
pc8736x_gpio_shadow[port] = val;
195
}
196
197
static int pc8736x_gpio_current(unsigned minor)
198
{
199
int port, bit;
200
minor &= 0x1f;
201
port = minor >> 3;
202
bit = minor & 7;
203
return ((pc8736x_gpio_shadow[port] >> bit) & 0x01);
204
}
205
206
static void pc8736x_gpio_change(unsigned index)
207
{
208
pc8736x_gpio_set(index, !pc8736x_gpio_current(index));
209
}
210
211
static struct nsc_gpio_ops pc8736x_gpio_ops = {
212
.owner = THIS_MODULE,
213
.gpio_config = pc8736x_gpio_configure,
214
.gpio_dump = nsc_gpio_dump,
215
.gpio_get = pc8736x_gpio_get,
216
.gpio_set = pc8736x_gpio_set,
217
.gpio_change = pc8736x_gpio_change,
218
.gpio_current = pc8736x_gpio_current
219
};
220
221
static int pc8736x_gpio_open(struct inode *inode, struct file *file)
222
{
223
unsigned m = iminor(inode);
224
file->private_data = &pc8736x_gpio_ops;
225
226
dev_dbg(&pdev->dev, "open %d\n", m);
227
228
if (m >= PC8736X_GPIO_CT)
229
return -EINVAL;
230
return nonseekable_open(inode, file);
231
}
232
233
static const struct file_operations pc8736x_gpio_fileops = {
234
.owner = THIS_MODULE,
235
.open = pc8736x_gpio_open,
236
.write = nsc_gpio_write,
237
.read = nsc_gpio_read,
238
};
239
240
static void __init pc8736x_init_shadow(void)
241
{
242
int port;
243
244
/* read the current values driven on the GPIO signals */
245
for (port = 0; port < 4; ++port)
246
pc8736x_gpio_shadow[port]
247
= inb_p(pc8736x_gpio_base + port_offset[port]
248
+ PORT_OUT);
249
250
}
251
252
static struct cdev pc8736x_gpio_cdev;
253
254
static int __init pc8736x_gpio_init(void)
255
{
256
int rc;
257
dev_t devid;
258
259
pdev = platform_device_alloc(DEVNAME, 0);
260
if (!pdev)
261
return -ENOMEM;
262
263
rc = platform_device_add(pdev);
264
if (rc) {
265
rc = -ENODEV;
266
goto undo_platform_dev_alloc;
267
}
268
dev_info(&pdev->dev, "NatSemi pc8736x GPIO Driver Initializing\n");
269
270
if (!pc8736x_superio_present()) {
271
rc = -ENODEV;
272
dev_err(&pdev->dev, "no device found\n");
273
goto undo_platform_dev_add;
274
}
275
pc8736x_gpio_ops.dev = &pdev->dev;
276
277
/* Verify that chip and it's GPIO unit are both enabled.
278
My BIOS does this, so I take minimum action here
279
*/
280
rc = superio_inb(SIO_CF1);
281
if (!(rc & 0x01)) {
282
rc = -ENODEV;
283
dev_err(&pdev->dev, "device not enabled\n");
284
goto undo_platform_dev_add;
285
}
286
device_select(SIO_GPIO_UNIT);
287
if (!superio_inb(SIO_UNIT_ACT)) {
288
rc = -ENODEV;
289
dev_err(&pdev->dev, "GPIO unit not enabled\n");
290
goto undo_platform_dev_add;
291
}
292
293
/* read the GPIO unit base addr that chip responds to */
294
pc8736x_gpio_base = (superio_inb(SIO_BASE_HADDR) << 8
295
| superio_inb(SIO_BASE_LADDR));
296
297
if (!request_region(pc8736x_gpio_base, PC8736X_GPIO_RANGE, DEVNAME)) {
298
rc = -ENODEV;
299
dev_err(&pdev->dev, "GPIO ioport %x busy\n",
300
pc8736x_gpio_base);
301
goto undo_platform_dev_add;
302
}
303
dev_info(&pdev->dev, "GPIO ioport %x reserved\n", pc8736x_gpio_base);
304
305
if (major) {
306
devid = MKDEV(major, 0);
307
rc = register_chrdev_region(devid, PC8736X_GPIO_CT, DEVNAME);
308
} else {
309
rc = alloc_chrdev_region(&devid, 0, PC8736X_GPIO_CT, DEVNAME);
310
major = MAJOR(devid);
311
}
312
313
if (rc < 0) {
314
dev_err(&pdev->dev, "register-chrdev failed: %d\n", rc);
315
goto undo_request_region;
316
}
317
if (!major) {
318
major = rc;
319
dev_dbg(&pdev->dev, "got dynamic major %d\n", major);
320
}
321
322
pc8736x_init_shadow();
323
324
/* ignore minor errs, and succeed */
325
cdev_init(&pc8736x_gpio_cdev, &pc8736x_gpio_fileops);
326
cdev_add(&pc8736x_gpio_cdev, devid, PC8736X_GPIO_CT);
327
328
return 0;
329
330
undo_request_region:
331
release_region(pc8736x_gpio_base, PC8736X_GPIO_RANGE);
332
undo_platform_dev_add:
333
platform_device_del(pdev);
334
undo_platform_dev_alloc:
335
platform_device_put(pdev);
336
337
return rc;
338
}
339
340
static void __exit pc8736x_gpio_cleanup(void)
341
{
342
dev_dbg(&pdev->dev, "cleanup\n");
343
344
cdev_del(&pc8736x_gpio_cdev);
345
unregister_chrdev_region(MKDEV(major,0), PC8736X_GPIO_CT);
346
release_region(pc8736x_gpio_base, PC8736X_GPIO_RANGE);
347
348
platform_device_unregister(pdev);
349
}
350
351
module_init(pc8736x_gpio_init);
352
module_exit(pc8736x_gpio_cleanup);
353
354