exynos-ppmu.h

/* SPDX-License-Identifier: GPL-2.0-only */
/*
 * exynos_ppmu.h - Exynos PPMU header file
 *
 * Copyright (c) 2015 Samsung Electronics Co., Ltd.
 * Author : Chanwoo Choi <[email protected]>
 */

#ifndef __EXYNOS_PPMU_H__
#define __EXYNOS_PPMU_H__

enum ppmu_state {
	PPMU_DISABLE = 0,
	PPMU_ENABLE,
};

enum ppmu_counter {
	PPMU_PMNCNT0 = 0,
	PPMU_PMNCNT1,
	PPMU_PMNCNT2,
	PPMU_PMNCNT3,

	PPMU_PMNCNT_MAX,
};

/***
 * PPMUv1.1 Definitions
 */
enum ppmu_event_type {
	PPMU_RO_BUSY_CYCLE_CNT	= 0x0,
	PPMU_WO_BUSY_CYCLE_CNT	= 0x1,
	PPMU_RW_BUSY_CYCLE_CNT	= 0x2,
	PPMU_RO_REQUEST_CNT	= 0x3,
	PPMU_WO_REQUEST_CNT	= 0x4,
	PPMU_RO_DATA_CNT	= 0x5,
	PPMU_WO_DATA_CNT	= 0x6,
	PPMU_RO_LATENCY		= 0x12,
	PPMU_WO_LATENCY		= 0x16,
};

enum ppmu_reg {
	/* PPC control register */
	PPMU_PMNC		= 0x00,
	PPMU_CNTENS		= 0x10,
	PPMU_CNTENC		= 0x20,
	PPMU_INTENS		= 0x30,
	PPMU_INTENC		= 0x40,
	PPMU_FLAG		= 0x50,

	/* Cycle Counter and Performance Event Counter Register */
	PPMU_CCNT		= 0x100,
	PPMU_PMCNT0		= 0x110,
	PPMU_PMCNT1		= 0x120,
	PPMU_PMCNT2		= 0x130,
	PPMU_PMCNT3_HIGH	= 0x140,
	PPMU_PMCNT3_LOW		= 0x150,

	/* Bus Event Generator */
	PPMU_BEVT0SEL		= 0x1000,
	PPMU_BEVT1SEL		= 0x1100,
	PPMU_BEVT2SEL		= 0x1200,
	PPMU_BEVT3SEL		= 0x1300,
	PPMU_COUNTER_RESET	= 0x1810,
	PPMU_READ_OVERFLOW_CNT	= 0x1810,
	PPMU_READ_UNDERFLOW_CNT	= 0x1814,
	PPMU_WRITE_OVERFLOW_CNT	= 0x1850,
	PPMU_WRITE_UNDERFLOW_CNT = 0x1854,
	PPMU_READ_PENDING_CNT	= 0x1880,
	PPMU_WRITE_PENDING_CNT	= 0x1884
};

/* PMNC register */
#define PPMU_PMNC_CC_RESET_SHIFT	2
#define PPMU_PMNC_COUNTER_RESET_SHIFT	1
#define PPMU_PMNC_ENABLE_SHIFT		0
#define PPMU_PMNC_START_MODE_MASK	BIT(16)
#define PPMU_PMNC_CC_DIVIDER_MASK	BIT(3)
#define PPMU_PMNC_CC_RESET_MASK		BIT(2)
#define PPMU_PMNC_COUNTER_RESET_MASK	BIT(1)
#define PPMU_PMNC_ENABLE_MASK		BIT(0)

/* CNTENS/CNTENC/INTENS/INTENC/FLAG register */
#define PPMU_CCNT_MASK			BIT(31)
#define PPMU_PMCNT3_MASK		BIT(3)
#define PPMU_PMCNT2_MASK		BIT(2)
#define PPMU_PMCNT1_MASK		BIT(1)
#define PPMU_PMCNT0_MASK		BIT(0)

/* PPMU_PMNCTx/PPMU_BETxSEL registers */
#define PPMU_PMNCT(x)			(PPMU_PMCNT0 + (0x10 * x))
#define PPMU_BEVTxSEL(x)		(PPMU_BEVT0SEL + (0x100 * x))

/***
 * PPMU_V2.0 definitions
 */
enum ppmu_v2_mode {
	PPMU_V2_MODE_MANUAL = 0,
	PPMU_V2_MODE_AUTO = 1,
	PPMU_V2_MODE_CIG = 2,	/* CIG (Conditional Interrupt Generation) */
};

enum ppmu_v2_event_type {
	PPMU_V2_RO_DATA_CNT	= 0x4,
	PPMU_V2_WO_DATA_CNT	= 0x5,

	PPMU_V2_EVT3_RW_DATA_CNT = 0x22,	/* Only for Event3 */
};

enum ppmu_V2_reg {
	/* PPC control register */
	PPMU_V2_PMNC		= 0x04,
	PPMU_V2_CNTENS		= 0x08,
	PPMU_V2_CNTENC		= 0x0c,
	PPMU_V2_INTENS		= 0x10,
	PPMU_V2_INTENC		= 0x14,
	PPMU_V2_FLAG		= 0x18,

	/* Cycle Counter and Performance Event Counter Register */
	PPMU_V2_CCNT		= 0x48,
	PPMU_V2_PMCNT0		= 0x34,
	PPMU_V2_PMCNT1		= 0x38,
	PPMU_V2_PMCNT2		= 0x3c,
	PPMU_V2_PMCNT3_LOW	= 0x40,
	PPMU_V2_PMCNT3_HIGH	= 0x44,

	/* Bus Event Generator */
	PPMU_V2_CIG_CFG0		= 0x1c,
	PPMU_V2_CIG_CFG1		= 0x20,
	PPMU_V2_CIG_CFG2		= 0x24,
	PPMU_V2_CIG_RESULT	= 0x28,
	PPMU_V2_CNT_RESET	= 0x2c,
	PPMU_V2_CNT_AUTO		= 0x30,
	PPMU_V2_CH_EV0_TYPE	= 0x200,
	PPMU_V2_CH_EV1_TYPE	= 0x204,
	PPMU_V2_CH_EV2_TYPE	= 0x208,
	PPMU_V2_CH_EV3_TYPE	= 0x20c,
	PPMU_V2_SM_ID_V		= 0x220,
	PPMU_V2_SM_ID_A		= 0x224,
	PPMU_V2_SM_OTHERS_V	= 0x228,
	PPMU_V2_SM_OTHERS_A	= 0x22c,
	PPMU_V2_INTERRUPT_RESET	= 0x260,
};

/* PMNC register */
#define PPMU_V2_PMNC_START_MODE_SHIFT	20
#define PPMU_V2_PMNC_START_MODE_MASK	(0x3 << PPMU_V2_PMNC_START_MODE_SHIFT)

#define PPMU_PMNC_CC_RESET_SHIFT	2
#define PPMU_PMNC_COUNTER_RESET_SHIFT	1
#define PPMU_PMNC_ENABLE_SHIFT		0
#define PPMU_PMNC_START_MODE_MASK	BIT(16)
#define PPMU_PMNC_CC_DIVIDER_MASK	BIT(3)
#define PPMU_PMNC_CC_RESET_MASK		BIT(2)
#define PPMU_PMNC_COUNTER_RESET_MASK	BIT(1)
#define PPMU_PMNC_ENABLE_MASK		BIT(0)

#define PPMU_V2_PMNCT(x)		(PPMU_V2_PMCNT0 + (0x4 * x))
#define PPMU_V2_CH_EVx_TYPE(x)		(PPMU_V2_CH_EV0_TYPE + (0x4 * x))

#endif /* __EXYNOS_PPMU_H__ */