/* SPDX-License-Identifier: GPL-2.0+1*2* Copyright (c) by Jaroslav Kysela <[email protected]>3* Universal interface for Audio Codec '974*5* For more details look to AC '97 component specification revision 2.16* by Intel Corporation (http://developer.intel.com).7*/8/*9* AC'97 codec registers10*/1112#define AC97_RESET 0x00 /* Reset */13#define AC97_MASTER 0x02 /* Master Volume */14#define AC97_HEADPHONE 0x04 /* Headphone Volume (optional) */15#define AC97_MASTER_MONO 0x06 /* Master Volume Mono (optional) */16#define AC97_MASTER_TONE 0x08 /* Master Tone (Bass & Treble) (optional) */17#define AC97_PC_BEEP 0x0a /* PC Beep Volume (optional) */18#define AC97_PHONE 0x0c /* Phone Volume (optional) */19#define AC97_MIC 0x0e /* MIC Volume */20#define AC97_LINE 0x10 /* Line In Volume */21#define AC97_CD 0x12 /* CD Volume */22#define AC97_VIDEO 0x14 /* Video Volume (optional) */23#define AC97_AUX 0x16 /* AUX Volume (optional) */24#define AC97_PCM 0x18 /* PCM Volume */25#define AC97_REC_SEL 0x1a /* Record Select */26#define AC97_REC_GAIN 0x1c /* Record Gain */27#define AC97_REC_GAIN_MIC 0x1e /* Record Gain MIC (optional) */28#define AC97_GENERAL_PURPOSE 0x20 /* General Purpose (optional) */29#define AC97_3D_CONTROL 0x22 /* 3D Control (optional) */30#define AC97_INT_PAGING 0x24 /* Audio Interrupt & Paging (AC'97 2.3) */31#define AC97_POWERDOWN 0x26 /* Powerdown control / status */32/* range 0x28-0x3a - AUDIO AC'97 2.0 extensions */33#define AC97_EXTENDED_ID 0x28 /* Extended Audio ID */34#define AC97_EXTENDED_STATUS 0x2a /* Extended Audio Status and Control */35#define AC97_PCM_FRONT_DAC_RATE 0x2c /* PCM Front DAC Rate */36#define AC97_PCM_SURR_DAC_RATE 0x2e /* PCM Surround DAC Rate */37#define AC97_PCM_LFE_DAC_RATE 0x30 /* PCM LFE DAC Rate */38#define AC97_PCM_LR_ADC_RATE 0x32 /* PCM LR ADC Rate */39#define AC97_PCM_MIC_ADC_RATE 0x34 /* PCM MIC ADC Rate */40#define AC97_CENTER_LFE_MASTER 0x36 /* Center + LFE Master Volume */41#define AC97_SURROUND_MASTER 0x38 /* Surround (Rear) Master Volume */42#define AC97_SPDIF 0x3a /* S/PDIF control */43/* range 0x3c-0x58 - MODEM */44#define AC97_EXTENDED_MID 0x3c /* Extended Modem ID */45#define AC97_EXTENDED_MSTATUS 0x3e /* Extended Modem Status and Control */46#define AC97_LINE1_RATE 0x40 /* Line1 DAC/ADC Rate */47#define AC97_LINE2_RATE 0x42 /* Line2 DAC/ADC Rate */48#define AC97_HANDSET_RATE 0x44 /* Handset DAC/ADC Rate */49#define AC97_LINE1_LEVEL 0x46 /* Line1 DAC/ADC Level */50#define AC97_LINE2_LEVEL 0x48 /* Line2 DAC/ADC Level */51#define AC97_HANDSET_LEVEL 0x4a /* Handset DAC/ADC Level */52#define AC97_GPIO_CFG 0x4c /* GPIO Configuration */53#define AC97_GPIO_POLARITY 0x4e /* GPIO Pin Polarity/Type, 0=low, 1=high active */54#define AC97_GPIO_STICKY 0x50 /* GPIO Pin Sticky, 0=not, 1=sticky */55#define AC97_GPIO_WAKEUP 0x52 /* GPIO Pin Wakeup, 0=no int, 1=yes int */56#define AC97_GPIO_STATUS 0x54 /* GPIO Pin Status, slot 12 */57#define AC97_MISC_AFE 0x56 /* Miscellaneous Modem AFE Status and Control */58/* range 0x5a-0x7b - Vendor Specific */59#define AC97_VENDOR_ID1 0x7c /* Vendor ID1 */60#define AC97_VENDOR_ID2 0x7e /* Vendor ID2 / revision */61/* range 0x60-0x6f (page 1) - extended codec registers */62#define AC97_CODEC_CLASS_REV 0x60 /* Codec Class/Revision */63#define AC97_PCI_SVID 0x62 /* PCI Subsystem Vendor ID */64#define AC97_PCI_SID 0x64 /* PCI Subsystem ID */65#define AC97_FUNC_SELECT 0x66 /* Function Select */66#define AC97_FUNC_INFO 0x68 /* Function Information */67#define AC97_SENSE_INFO 0x6a /* Sense Details */6869/* volume controls */70#define AC97_MUTE_MASK_MONO 0x800071#define AC97_MUTE_MASK_STEREO 0x80807273/* slot allocation */74#define AC97_SLOT_TAG 075#define AC97_SLOT_CMD_ADDR 176#define AC97_SLOT_CMD_DATA 277#define AC97_SLOT_PCM_LEFT 378#define AC97_SLOT_PCM_RIGHT 479#define AC97_SLOT_MODEM_LINE1 580#define AC97_SLOT_PCM_CENTER 681#define AC97_SLOT_MIC 6 /* input */82#define AC97_SLOT_SPDIF_LEFT1 683#define AC97_SLOT_PCM_SLEFT 7 /* surround left */84#define AC97_SLOT_PCM_LEFT_0 7 /* double rate operation */85#define AC97_SLOT_SPDIF_LEFT 786#define AC97_SLOT_PCM_SRIGHT 8 /* surround right */87#define AC97_SLOT_PCM_RIGHT_0 8 /* double rate operation */88#define AC97_SLOT_SPDIF_RIGHT 889#define AC97_SLOT_LFE 990#define AC97_SLOT_SPDIF_RIGHT1 991#define AC97_SLOT_MODEM_LINE2 1092#define AC97_SLOT_PCM_LEFT_1 10 /* double rate operation */93#define AC97_SLOT_SPDIF_LEFT2 1094#define AC97_SLOT_HANDSET 11 /* output */95#define AC97_SLOT_PCM_RIGHT_1 11 /* double rate operation */96#define AC97_SLOT_SPDIF_RIGHT2 1197#define AC97_SLOT_MODEM_GPIO 12 /* modem GPIO */98#define AC97_SLOT_PCM_CENTER_1 12 /* double rate operation */99100/* basic capabilities (reset register) */101#define AC97_BC_DEDICATED_MIC 0x0001 /* Dedicated Mic PCM In Channel */102#define AC97_BC_RESERVED1 0x0002 /* Reserved (was Modem Line Codec support) */103#define AC97_BC_BASS_TREBLE 0x0004 /* Bass & Treble Control */104#define AC97_BC_SIM_STEREO 0x0008 /* Simulated stereo */105#define AC97_BC_HEADPHONE 0x0010 /* Headphone Out Support */106#define AC97_BC_LOUDNESS 0x0020 /* Loudness (bass boost) Support */107#define AC97_BC_16BIT_DAC 0x0000 /* 16-bit DAC resolution */108#define AC97_BC_18BIT_DAC 0x0040 /* 18-bit DAC resolution */109#define AC97_BC_20BIT_DAC 0x0080 /* 20-bit DAC resolution */110#define AC97_BC_DAC_MASK 0x00c0111#define AC97_BC_16BIT_ADC 0x0000 /* 16-bit ADC resolution */112#define AC97_BC_18BIT_ADC 0x0100 /* 18-bit ADC resolution */113#define AC97_BC_20BIT_ADC 0x0200 /* 20-bit ADC resolution */114#define AC97_BC_ADC_MASK 0x0300115#define AC97_BC_3D_TECH_ID_MASK 0x7c00 /* Per-vendor ID of 3D enhancement */116117/* general purpose */118#define AC97_GP_DRSS_MASK 0x0c00 /* double rate slot select */119#define AC97_GP_DRSS_1011 0x0000 /* LR(C) 10+11(+12) */120#define AC97_GP_DRSS_78 0x0400 /* LR 7+8 */121122/* powerdown bits */123#define AC97_PD_ADC_STATUS 0x0001 /* ADC status (RO) */124#define AC97_PD_DAC_STATUS 0x0002 /* DAC status (RO) */125#define AC97_PD_MIXER_STATUS 0x0004 /* Analog mixer status (RO) */126#define AC97_PD_VREF_STATUS 0x0008 /* Vref status (RO) */127#define AC97_PD_PR0 0x0100 /* Power down PCM ADCs and input MUX */128#define AC97_PD_PR1 0x0200 /* Power down PCM front DAC */129#define AC97_PD_PR2 0x0400 /* Power down Mixer (Vref still on) */130#define AC97_PD_PR3 0x0800 /* Power down Mixer (Vref off) */131#define AC97_PD_PR4 0x1000 /* Power down AC-Link */132#define AC97_PD_PR5 0x2000 /* Disable internal clock usage */133#define AC97_PD_PR6 0x4000 /* Headphone amplifier */134#define AC97_PD_EAPD 0x8000 /* External Amplifer Power Down (EAPD) */135136/* extended audio ID bit defines */137#define AC97_EI_VRA 0x0001 /* Variable bit rate supported */138#define AC97_EI_DRA 0x0002 /* Double rate supported */139#define AC97_EI_SPDIF 0x0004 /* S/PDIF out supported */140#define AC97_EI_VRM 0x0008 /* Variable bit rate supported for MIC */141#define AC97_EI_DACS_SLOT_MASK 0x0030 /* DACs slot assignment */142#define AC97_EI_DACS_SLOT_SHIFT 4143#define AC97_EI_CDAC 0x0040 /* PCM Center DAC available */144#define AC97_EI_SDAC 0x0080 /* PCM Surround DACs available */145#define AC97_EI_LDAC 0x0100 /* PCM LFE DAC available */146#define AC97_EI_AMAP 0x0200 /* indicates optional slot/DAC mapping based on codec ID */147#define AC97_EI_REV_MASK 0x0c00 /* AC'97 revision mask */148#define AC97_EI_REV_22 0x0400 /* AC'97 revision 2.2 */149#define AC97_EI_REV_23 0x0800 /* AC'97 revision 2.3 */150#define AC97_EI_REV_SHIFT 10151#define AC97_EI_ADDR_MASK 0xc000 /* physical codec ID (address) */152#define AC97_EI_ADDR_SHIFT 14153154/* extended audio status and control bit defines */155#define AC97_EA_VRA 0x0001 /* Variable bit rate enable bit */156#define AC97_EA_DRA 0x0002 /* Double-rate audio enable bit */157#define AC97_EA_SPDIF 0x0004 /* S/PDIF out enable bit */158#define AC97_EA_VRM 0x0008 /* Variable bit rate for MIC enable bit */159#define AC97_EA_SPSA_SLOT_MASK 0x0030 /* Mask for slot assignment bits */160#define AC97_EA_SPSA_SLOT_SHIFT 4161#define AC97_EA_SPSA_3_4 0x0000 /* Slot assigned to 3 & 4 */162#define AC97_EA_SPSA_7_8 0x0010 /* Slot assigned to 7 & 8 */163#define AC97_EA_SPSA_6_9 0x0020 /* Slot assigned to 6 & 9 */164#define AC97_EA_SPSA_10_11 0x0030 /* Slot assigned to 10 & 11 */165#define AC97_EA_CDAC 0x0040 /* PCM Center DAC is ready (Read only) */166#define AC97_EA_SDAC 0x0080 /* PCM Surround DACs are ready (Read only) */167#define AC97_EA_LDAC 0x0100 /* PCM LFE DAC is ready (Read only) */168#define AC97_EA_MDAC 0x0200 /* MIC ADC is ready (Read only) */169#define AC97_EA_SPCV 0x0400 /* S/PDIF configuration valid (Read only) */170#define AC97_EA_PRI 0x0800 /* Turns the PCM Center DAC off */171#define AC97_EA_PRJ 0x1000 /* Turns the PCM Surround DACs off */172#define AC97_EA_PRK 0x2000 /* Turns the PCM LFE DAC off */173#define AC97_EA_PRL 0x4000 /* Turns the MIC ADC off */174175/* S/PDIF control bit defines */176#define AC97_SC_PRO 0x0001 /* Professional status */177#define AC97_SC_NAUDIO 0x0002 /* Non audio stream */178#define AC97_SC_COPY 0x0004 /* Copyright status */179#define AC97_SC_PRE 0x0008 /* Preemphasis status */180#define AC97_SC_CC_MASK 0x07f0 /* Category Code mask */181#define AC97_SC_CC_SHIFT 4182#define AC97_SC_L 0x0800 /* Generation Level status */183#define AC97_SC_SPSR_MASK 0x3000 /* S/PDIF Sample Rate bits */184#define AC97_SC_SPSR_SHIFT 12185#define AC97_SC_SPSR_44K 0x0000 /* Use 44.1kHz Sample rate */186#define AC97_SC_SPSR_48K 0x2000 /* Use 48kHz Sample rate */187#define AC97_SC_SPSR_32K 0x3000 /* Use 32kHz Sample rate */188#define AC97_SC_DRS 0x4000 /* Double Rate S/PDIF */189#define AC97_SC_V 0x8000 /* Validity status */190191/* Interrupt and Paging bit defines (AC'97 2.3) */192#define AC97_PAGE_MASK 0x000f /* Page Selector */193#define AC97_PAGE_VENDOR 0 /* Vendor-specific registers */194#define AC97_PAGE_1 1 /* Extended Codec Registers page 1 */195#define AC97_INT_ENABLE 0x0800 /* Interrupt Enable */196#define AC97_INT_SENSE 0x1000 /* Sense Cycle */197#define AC97_INT_CAUSE_SENSE 0x2000 /* Sense Cycle Completed (RO) */198#define AC97_INT_CAUSE_GPIO 0x4000 /* GPIO bits changed (RO) */199#define AC97_INT_STATUS 0x8000 /* Interrupt Status */200201/* extended modem ID bit defines */202#define AC97_MEI_LINE1 0x0001 /* Line1 present */203#define AC97_MEI_LINE2 0x0002 /* Line2 present */204#define AC97_MEI_HANDSET 0x0004 /* Handset present */205#define AC97_MEI_CID1 0x0008 /* caller ID decode for Line1 is supported */206#define AC97_MEI_CID2 0x0010 /* caller ID decode for Line2 is supported */207#define AC97_MEI_ADDR_MASK 0xc000 /* physical codec ID (address) */208#define AC97_MEI_ADDR_SHIFT 14209210/* extended modem status and control bit defines */211#define AC97_MEA_GPIO 0x0001 /* GPIO is ready (ro) */212#define AC97_MEA_MREF 0x0002 /* Vref is up to nominal level (ro) */213#define AC97_MEA_ADC1 0x0004 /* ADC1 operational (ro) */214#define AC97_MEA_DAC1 0x0008 /* DAC1 operational (ro) */215#define AC97_MEA_ADC2 0x0010 /* ADC2 operational (ro) */216#define AC97_MEA_DAC2 0x0020 /* DAC2 operational (ro) */217#define AC97_MEA_HADC 0x0040 /* HADC operational (ro) */218#define AC97_MEA_HDAC 0x0080 /* HDAC operational (ro) */219#define AC97_MEA_PRA 0x0100 /* GPIO power down (high) */220#define AC97_MEA_PRB 0x0200 /* reserved */221#define AC97_MEA_PRC 0x0400 /* ADC1 power down (high) */222#define AC97_MEA_PRD 0x0800 /* DAC1 power down (high) */223#define AC97_MEA_PRE 0x1000 /* ADC2 power down (high) */224#define AC97_MEA_PRF 0x2000 /* DAC2 power down (high) */225#define AC97_MEA_PRG 0x4000 /* HADC power down (high) */226#define AC97_MEA_PRH 0x8000 /* HDAC power down (high) */227228/* modem gpio status defines */229#define AC97_GPIO_LINE1_OH 0x0001 /* Off Hook Line1 */230#define AC97_GPIO_LINE1_RI 0x0002 /* Ring Detect Line1 */231#define AC97_GPIO_LINE1_CID 0x0004 /* Caller ID path enable Line1 */232#define AC97_GPIO_LINE1_LCS 0x0008 /* Loop Current Sense Line1 */233#define AC97_GPIO_LINE1_PULSE 0x0010 /* Opt./ Pulse Dial Line1 (out) */234#define AC97_GPIO_LINE1_HL1R 0x0020 /* Opt./ Handset to Line1 relay control (out) */235#define AC97_GPIO_LINE1_HOHD 0x0040 /* Opt./ Handset off hook detect Line1 (in) */236#define AC97_GPIO_LINE12_AC 0x0080 /* Opt./ Int.bit 1 / Line1/2 AC (out) */237#define AC97_GPIO_LINE12_DC 0x0100 /* Opt./ Int.bit 2 / Line1/2 DC (out) */238#define AC97_GPIO_LINE12_RS 0x0200 /* Opt./ Int.bit 3 / Line1/2 RS (out) */239#define AC97_GPIO_LINE2_OH 0x0400 /* Off Hook Line2 */240#define AC97_GPIO_LINE2_RI 0x0800 /* Ring Detect Line2 */241#define AC97_GPIO_LINE2_CID 0x1000 /* Caller ID path enable Line2 */242#define AC97_GPIO_LINE2_LCS 0x2000 /* Loop Current Sense Line2 */243#define AC97_GPIO_LINE2_PULSE 0x4000 /* Opt./ Pulse Dial Line2 (out) */244#define AC97_GPIO_LINE2_HL1R 0x8000 /* Opt./ Handset to Line2 relay control (out) */245246247248