Real-time collaboration for Jupyter Notebooks, Linux Terminals, LaTeX, VS Code, R IDE, and more,
all in one place.
Real-time collaboration for Jupyter Notebooks, Linux Terminals, LaTeX, VS Code, R IDE, and more,
all in one place.
| Download
GAP 4.8.9 installation with standard packages -- copy to your CoCalc project to get it
Project: cocalc-sagemath-dev-slelievre
Views: 418346# Makefile.in generated by automake 1.11.6 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
# Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
# Copyright 1991, 1993, 1994, 1996, 1997, 1999-2004, 2006-2009, 2011-2014 Free
# Software Foundation, Inc.
#
# This file is part of the GNU MP Library.
#
# The GNU MP Library is free software; you can redistribute it and/or modify
# it under the terms of either:
#
# * the GNU Lesser General Public License as published by the Free
# Software Foundation; either version 3 of the License, or (at your
# option) any later version.
#
# or
#
# * the GNU General Public License as published by the Free Software
# Foundation; either version 2 of the License, or (at your option) any
# later version.
#
# or both in parallel, as here.
#
# The GNU MP Library is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
# for more details.
#
# You should have received copies of the GNU General Public License and the
# GNU Lesser General Public License along with the GNU MP Library. If not,
# see https://www.gnu.org/licenses/.
# The following options are the same as AM_INIT_AUTOMAKE in configure.in,
# except no $(top_builddir) on ansi2knr. That directory is wanted for the
# Makefiles in subdirectories, but here we must omit it so automake gives
# the actual ansi2knr build rule, not "cd $(top_builddir) && make ansi2knr".
#
# AUTOMAKE_OPTIONS = 1.8 gnu no-dependencies
# Libtool -version-info for libgmp.la and libmp.la. See "Versioning" in the
# libtool manual.
#
# CURRENT:REVISION:AGE
#
# 1. No interfaces changed, only implementations (good): Increment REVISION.
#
# 2. Interfaces added, none removed (good): Increment CURRENT, increment
# AGE, set REVISION to 0.
#
# 3. Interfaces removed (BAD, breaks upward compatibility): Increment
# CURRENT, set AGE and REVISION to 0.
#
# Do this separately for libgmp, libgmpxx and libmp, and only for releases.
#
# GMP -version-info
# release libgmp libgmpxx libmp
# 2.0.x - - -
# 3.0 3:0:0 - 3:0:0
# 3.0.1 3:1:0 - 3:0:0
# 3.1 4:0:1 - 4:0:1
# 3.1.1 4:1:1 - 4:1:1
# 4.0 5:0:2 3:0:0 4:2:1
# 4.0.1 5:1:2 3:1:0 4:3:1
# 4.1 6:0:3 3:2:0 4:4:1
# 4.1.1 6:1:3 3:3:0 4:5:1
# 4.1.2 6:2:3 3:4:0 4:6:1
# 4.1.3 6:3:3 3:5:0 4:7:1
# 4.1.4 6:3:3 3:5:0 4:7:1 WRONG, same as 4.1.3!
# 4.2 6:0:3 3:2:0 4:4:1 REALLY WRONG, same as 4.1!
# 4.2.1 7:1:4 4:1:1 4:10:1 WRONG for libgmpxx
# 4.2.2 7:2:4 4:2:0 4:11:1
# 4.2.3 7:3:4 4:3:0 4:12:1
# 4.2.4 7:4:4 4:4:0 4:13:1
# 4.3.0 8:0:5 5:0:1 4:14:1
# 4.3.1 8:1:5 5:1:1 4:15:1 WRONG Really used same as 4.3.0
# 4.3.2 8:2:5 5:2:1 4:16:1
# 5.0.0 9:0:6 6:0:2 4:20:1 Should have been 10:0:0
# 5.0.1 10:1:0 6:1:2 4:21:1
# 5.0.2 10:2:0 6:2:2 4:22:1
# 5.0.3 10:3:0 6:3:2 4:23:1
# 5.0.4 10:4:0 6:4:2 4:24:1
# 5.0.5 10:5:0 6:5:2 4:25:1
# 5.1.0 11:0:1 7:0:3 -
# 5.1.1 11:1:1 7:1:3 -
# 5.1.2 11:2:1 7:2:3 -
# 6.0.0 12:0:2 8:0:4 -
#
# Starting at 3:0:0 is a slight abuse of the versioning system, but it
# ensures we're past soname libgmp.so.2, which was used on Debian GNU/Linux
# packages of gmp 2. Pretend gmp 2 was 2:0:0, so the interface changes for
# gmp 3 mean 3:0:0 is right.
#
# We interpret "implementation changed" in item "1." above as meaning any
# release, ie. the REVISION is incremented every time (if nothing else).
# Even if we thought the code generated will be identical on all systems,
# it's still good to get the shared library filename (like
# libgmpxx.so.3.0.4) incrementing, to make it clear which GMP it's from.
VPATH = @srcdir@
am__make_dryrun = \
{ \
am__dry=no; \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
| grep '^AM OK$$' >/dev/null || am__dry=yes;; \
*) \
for am__flg in $$MAKEFLAGS; do \
case $$am__flg in \
*=*|--*) ;; \
*n*) am__dry=yes; break;; \
esac; \
done;; \
esac; \
test $$am__dry = yes; \
}
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = .
DIST_COMMON = README $(am__configure_deps) $(am__include_HEADERS_DIST) \
$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
$(srcdir)/config.in $(srcdir)/gmp-h.in $(top_srcdir)/configure \
AUTHORS COPYING ChangeLog INSTALL NEWS config.guess config.sub \
install-sh ltmain.sh missing ylwrap
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = gmp.h gmp-mparam.h
CONFIG_CLEAN_VPATH_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
test -z "$$files" \
|| { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && rm -f $$files; }; \
}
am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)" \
"$(DESTDIR)$(includeexecdir)"
LTLIBRARIES = $(lib_LTLIBRARIES)
am__DEPENDENCIES_1 = $(MPF_OBJECTS) $(MPZ_OBJECTS) $(MPQ_OBJECTS) \
$(MPN_OBJECTS) $(PRINTF_OBJECTS) $(SCANF_OBJECTS) \
$(RANDOM_OBJECTS)
am_libgmp_la_OBJECTS = assert.lo compat.lo errno.lo extract-dbl.lo \
invalid.lo memory.lo mp_bpl.lo mp_clz_tab.lo mp_dv_tab.lo \
mp_minv_tab.lo mp_get_fns.lo mp_set_fns.lo version.lo \
nextprime.lo primesieve.lo
libgmp_la_OBJECTS = $(am_libgmp_la_OBJECTS)
libgmp_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
$(libgmp_la_LDFLAGS) $(LDFLAGS) -o $@
am_libgmpxx_la_OBJECTS = dummy.lo
libgmpxx_la_OBJECTS = $(am_libgmpxx_la_OBJECTS)
libgmpxx_la_LINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) \
$(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \
$(CXXFLAGS) $(libgmpxx_la_LDFLAGS) $(LDFLAGS) -o $@
@WANT_CXX_TRUE@am_libgmpxx_la_rpath = -rpath $(libdir)
DEFAULT_INCLUDES = -I.@am__isrc@
depcomp =
am__depfiles_maybe =
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
$(LDFLAGS) -o $@
CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
--mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
CXXLD = $(CXX)
CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
--mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \
$(LDFLAGS) -o $@
SOURCES = $(libgmp_la_SOURCES) $(EXTRA_libgmp_la_SOURCES) \
$(libgmpxx_la_SOURCES)
DIST_SOURCES = $(libgmp_la_SOURCES) $(EXTRA_libgmp_la_SOURCES) \
$(libgmpxx_la_SOURCES)
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
install-dvi-recursive install-exec-recursive \
install-html-recursive install-info-recursive \
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__include_HEADERS_DIST = gmpxx.h
HEADERS = $(include_HEADERS) $(nodist_includeexec_HEADERS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
distdir dist dist-all distcheck
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
if test -d "$(distdir)"; then \
find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
&& rm -rf "$(distdir)" \
|| { sleep 5 && rm -rf "$(distdir)"; }; \
else :; fi
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]*/*,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
if test "$$first" != "."; then \
if test "$$first" = ".."; then \
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
else \
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
if test "$$first2" = "$$first"; then \
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
else \
dir2="../$$dir2"; \
fi; \
dir0="$$dir0"/"$$first"; \
fi; \
fi; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
| sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ABI = @ABI@
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AR = @AR@
AS = @AS@
ASMFLAGS = @ASMFLAGS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CALLING_CONVENTIONS_OBJS = @CALLING_CONVENTIONS_OBJS@
CC = @CC@
CCAS = @CCAS@
CC_FOR_BUILD = @CC_FOR_BUILD@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CPP_FOR_BUILD = @CPP_FOR_BUILD@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFN_LONG_LONG_LIMB = @DEFN_LONG_LONG_LIMB@
DEFS = @DEFS@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
FGREP = @FGREP@
GMP_LDFLAGS = @GMP_LDFLAGS@
GMP_LIMB_BITS = @GMP_LIMB_BITS@
GMP_NAIL_BITS = @GMP_NAIL_BITS@
GREP = @GREP@
HAVE_CLOCK_01 = @HAVE_CLOCK_01@
HAVE_CPUTIME_01 = @HAVE_CPUTIME_01@
HAVE_GETRUSAGE_01 = @HAVE_GETRUSAGE_01@
HAVE_GETTIMEOFDAY_01 = @HAVE_GETTIMEOFDAY_01@
HAVE_HOST_CPU_FAMILY_power = @HAVE_HOST_CPU_FAMILY_power@
HAVE_HOST_CPU_FAMILY_powerpc = @HAVE_HOST_CPU_FAMILY_powerpc@
HAVE_SIGACTION_01 = @HAVE_SIGACTION_01@
HAVE_SIGALTSTACK_01 = @HAVE_SIGALTSTACK_01@
HAVE_SIGSTACK_01 = @HAVE_SIGSTACK_01@
HAVE_STACK_T_01 = @HAVE_STACK_T_01@
HAVE_SYS_RESOURCE_H_01 = @HAVE_SYS_RESOURCE_H_01@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDFLAGS = @LDFLAGS@
LEX = @LEX@
LEXLIB = @LEXLIB@
LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
LIBCURSES = @LIBCURSES@
LIBGMPXX_LDFLAGS = @LIBGMPXX_LDFLAGS@
LIBGMP_DLL = @LIBGMP_DLL@
LIBGMP_LDFLAGS = @LIBGMP_LDFLAGS@
LIBM = @LIBM@
LIBM_FOR_BUILD = @LIBM_FOR_BUILD@
LIBOBJS = @LIBOBJS@
LIBREADLINE = @LIBREADLINE@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
M4 = @M4@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SPEED_CYCLECOUNTER_OBJ = @SPEED_CYCLECOUNTER_OBJ@
STRIP = @STRIP@
TAL_OBJECT = @TAL_OBJECT@
TUNE_LIBS = @TUNE_LIBS@
TUNE_SQR_OBJ = @TUNE_SQR_OBJ@
U_FOR_BUILD = @U_FOR_BUILD@
VERSION = @VERSION@
WITH_READLINE_01 = @WITH_READLINE_01@
YACC = @YACC@
YFLAGS = @YFLAGS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__leading_dot = @am__leading_dot@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
gmp_srclinks = @gmp_srclinks@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
mpn_objects = @mpn_objects@
mpn_objs_in_libgmp = @mpn_objs_in_libgmp@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
LIBGMP_LT_CURRENT = 12
LIBGMP_LT_REVISION = 0
LIBGMP_LT_AGE = 2
LIBGMPXX_LT_CURRENT = 8
LIBGMPXX_LT_REVISION = 0
LIBGMPXX_LT_AGE = 4
SUBDIRS = tests mpn mpz mpq mpf printf scanf rand cxx demos tune doc
# The "test -f" support for srcdir!=builddir is similar to the automake .c.o
# etc rules, but with each foo.c explicitly, since $< is not portable
# outside an inference rule.
#
# A quoted 'foo.c' is used with the "test -f"'s to avoid Sun make rewriting
# it as part of its VPATH support. See the autoconf manual "Limitations of
# Make".
#
# Generated .h files which are used by gmp-impl.h are BUILT_SOURCES since
# they must exist before anything can be compiled.
#
# Other generated .h files are also BUILT_SOURCES so as to get all the
# build-system stuff over and done with at the start. Also, dependencies on
# the .h files are not properly expressed for the various objects that use
# them.
# Distribute mini-gmp. Test sources copied by dist-hook.
EXTRA_DIST = configfsf.guess configfsf.sub .gdbinit INSTALL.autoconf \
COPYING.LESSERv3 COPYINGv2 COPYINGv3 gmpxx.h bootstrap.c \
gen-fac.c gen-fib.c gen-bases.c gen-trialdivtab.c \
gen-jacobitab.c gen-psqr.c mini-gmp/README mini-gmp/mini-gmp.c \
mini-gmp/mini-gmp.h mini-gmp/tests/Makefile \
mini-gmp/tests/run-tests
@WANT_CXX_TRUE@GMPXX_HEADERS_OPTION = gmpxx.h
# gmp.h and mp.h are architecture dependent, mainly since they encode the
# limb size used in libgmp. For that reason they belong under $exec_prefix
# not $prefix, strictly speaking.
#
# $exec_prefix/include is not in the default include path for gcc built to
# the same $prefix and $exec_prefix, which might mean gmp.h is not found,
# but anyone knowledgeable enough to be playing with exec_prefix will be able
# to address that.
#
includeexecdir = $(exec_prefix)/include
include_HEADERS = $(GMPXX_HEADERS_OPTION)
nodist_includeexec_HEADERS = gmp.h
lib_LTLIBRARIES = libgmp.la $(GMPXX_LTLIBRARIES_OPTION)
BUILT_SOURCES = gmp.h fac_table.h fib_table.h mpn/fib_table.c \
mp_bases.h mpn/mp_bases.c trialdivtab.h mpn/jacobitab.h \
mpn/perfsqr.h
DISTCLEANFILES = $(BUILT_SOURCES) config.m4 @gmp_srclinks@ \
gen-fac$(EXEEXT_FOR_BUILD) gen-fib$(EXEEXT_FOR_BUILD) \
gen-bases$(EXEEXT_FOR_BUILD) \
gen-trialdivtab$(EXEEXT_FOR_BUILD) \
gen-jacobitab$(EXEEXT_FOR_BUILD) gen-psqr$(EXEEXT_FOR_BUILD)
# Tell gmp.h it's building gmp, not an application, used by windows DLL stuff.
INCLUDES = -D__GMP_WITHIN_GMP
MPF_OBJECTS = mpf/init$U.lo mpf/init2$U.lo mpf/inits$U.lo mpf/set$U.lo \
mpf/set_ui$U.lo mpf/set_si$U.lo mpf/set_str$U.lo mpf/set_d$U.lo \
mpf/set_z$U.lo mpf/iset$U.lo mpf/iset_ui$U.lo mpf/iset_si$U.lo \
mpf/iset_str$U.lo mpf/iset_d$U.lo mpf/clear$U.lo mpf/clears$U.lo \
mpf/get_str$U.lo mpf/dump$U.lo mpf/size$U.lo mpf/eq$U.lo mpf/reldiff$U.lo \
mpf/sqrt$U.lo mpf/random2$U.lo mpf/inp_str$U.lo mpf/out_str$U.lo \
mpf/add$U.lo mpf/add_ui$U.lo mpf/sub$U.lo mpf/sub_ui$U.lo mpf/ui_sub$U.lo \
mpf/mul$U.lo mpf/mul_ui$U.lo mpf/div$U.lo mpf/div_ui$U.lo \
mpf/cmp$U.lo mpf/cmp_d$U.lo mpf/cmp_ui$U.lo mpf/cmp_si$U.lo \
mpf/mul_2exp$U.lo mpf/div_2exp$U.lo mpf/abs$U.lo mpf/neg$U.lo \
mpf/set_q$U.lo mpf/get_d$U.lo mpf/get_d_2exp$U.lo mpf/set_dfl_prec$U.lo \
mpf/set_prc$U.lo mpf/set_prc_raw$U.lo mpf/get_dfl_prec$U.lo \
mpf/get_prc$U.lo mpf/ui_div$U.lo mpf/sqrt_ui$U.lo \
mpf/ceilfloor$U.lo mpf/trunc$U.lo mpf/pow_ui$U.lo \
mpf/urandomb$U.lo mpf/swap$U.lo \
mpf/fits_sint$U.lo mpf/fits_slong$U.lo mpf/fits_sshort$U.lo \
mpf/fits_uint$U.lo mpf/fits_ulong$U.lo mpf/fits_ushort$U.lo \
mpf/get_si$U.lo mpf/get_ui$U.lo \
mpf/int_p$U.lo
MPZ_OBJECTS = mpz/abs$U.lo mpz/add$U.lo mpz/add_ui$U.lo \
mpz/aorsmul$U.lo mpz/aorsmul_i$U.lo mpz/and$U.lo mpz/array_init$U.lo \
mpz/bin_ui$U.lo mpz/bin_uiui$U.lo \
mpz/cdiv_q$U.lo mpz/cdiv_q_ui$U.lo \
mpz/cdiv_qr$U.lo mpz/cdiv_qr_ui$U.lo \
mpz/cdiv_r$U.lo mpz/cdiv_r_ui$U.lo mpz/cdiv_ui$U.lo \
mpz/cfdiv_q_2exp$U.lo mpz/cfdiv_r_2exp$U.lo \
mpz/clear$U.lo mpz/clears$U.lo mpz/clrbit$U.lo \
mpz/cmp$U.lo mpz/cmp_d$U.lo mpz/cmp_si$U.lo mpz/cmp_ui$U.lo \
mpz/cmpabs$U.lo mpz/cmpabs_d$U.lo mpz/cmpabs_ui$U.lo \
mpz/com$U.lo mpz/combit$U.lo \
mpz/cong$U.lo mpz/cong_2exp$U.lo mpz/cong_ui$U.lo \
mpz/divexact$U.lo mpz/divegcd$U.lo mpz/dive_ui$U.lo \
mpz/divis$U.lo mpz/divis_ui$U.lo mpz/divis_2exp$U.lo mpz/dump$U.lo \
mpz/export$U.lo mpz/mfac_uiui$U.lo \
mpz/2fac_ui$U.lo mpz/fac_ui$U.lo mpz/oddfac_1$U.lo mpz/prodlimbs$U.lo \
mpz/fdiv_q_ui$U.lo mpz/fdiv_qr$U.lo mpz/fdiv_qr_ui$U.lo \
mpz/fdiv_r$U.lo mpz/fdiv_r_ui$U.lo mpz/fdiv_q$U.lo \
mpz/fdiv_ui$U.lo mpz/fib_ui$U.lo mpz/fib2_ui$U.lo mpz/fits_sint$U.lo \
mpz/fits_slong$U.lo mpz/fits_sshort$U.lo mpz/fits_uint$U.lo \
mpz/fits_ulong$U.lo mpz/fits_ushort$U.lo mpz/gcd$U.lo \
mpz/gcd_ui$U.lo mpz/gcdext$U.lo mpz/get_d$U.lo mpz/get_d_2exp$U.lo \
mpz/get_si$U.lo mpz/get_str$U.lo mpz/get_ui$U.lo mpz/getlimbn$U.lo \
mpz/hamdist$U.lo \
mpz/import$U.lo mpz/init$U.lo mpz/init2$U.lo mpz/inits$U.lo \
mpz/inp_raw$U.lo mpz/inp_str$U.lo mpz/invert$U.lo \
mpz/ior$U.lo mpz/iset$U.lo mpz/iset_d$U.lo mpz/iset_si$U.lo \
mpz/iset_str$U.lo mpz/iset_ui$U.lo mpz/jacobi$U.lo mpz/kronsz$U.lo \
mpz/kronuz$U.lo mpz/kronzs$U.lo mpz/kronzu$U.lo \
mpz/lcm$U.lo mpz/lcm_ui$U.lo mpz/limbs_finish$U.lo \
mpz/limbs_modify$U.lo mpz/limbs_read$U.lo mpz/limbs_write$U.lo \
mpz/lucnum_ui$U.lo mpz/lucnum2_ui$U.lo \
mpz/millerrabin$U.lo mpz/mod$U.lo mpz/mul$U.lo mpz/mul_2exp$U.lo \
mpz/mul_si$U.lo mpz/mul_ui$U.lo \
mpz/n_pow_ui$U.lo mpz/neg$U.lo mpz/nextprime$U.lo \
mpz/out_raw$U.lo mpz/out_str$U.lo mpz/perfpow$U.lo mpz/perfsqr$U.lo \
mpz/popcount$U.lo mpz/pow_ui$U.lo mpz/powm$U.lo mpz/powm_sec$U.lo \
mpz/powm_ui$U.lo mpz/primorial_ui$U.lo \
mpz/pprime_p$U.lo mpz/random$U.lo mpz/random2$U.lo \
mpz/realloc$U.lo mpz/realloc2$U.lo mpz/remove$U.lo mpz/roinit_n$U.lo \
mpz/root$U.lo mpz/rootrem$U.lo mpz/rrandomb$U.lo mpz/scan0$U.lo \
mpz/scan1$U.lo mpz/set$U.lo mpz/set_d$U.lo mpz/set_f$U.lo \
mpz/set_q$U.lo mpz/set_si$U.lo mpz/set_str$U.lo mpz/set_ui$U.lo \
mpz/setbit$U.lo \
mpz/size$U.lo mpz/sizeinbase$U.lo mpz/sqrt$U.lo \
mpz/sqrtrem$U.lo mpz/sub$U.lo mpz/sub_ui$U.lo mpz/swap$U.lo \
mpz/tdiv_ui$U.lo mpz/tdiv_q$U.lo mpz/tdiv_q_2exp$U.lo \
mpz/tdiv_q_ui$U.lo mpz/tdiv_qr$U.lo mpz/tdiv_qr_ui$U.lo \
mpz/tdiv_r$U.lo mpz/tdiv_r_2exp$U.lo mpz/tdiv_r_ui$U.lo \
mpz/tstbit$U.lo mpz/ui_pow_ui$U.lo mpz/ui_sub$U.lo mpz/urandomb$U.lo \
mpz/urandomm$U.lo mpz/xor$U.lo
MPQ_OBJECTS = mpq/abs$U.lo mpq/aors$U.lo \
mpq/canonicalize$U.lo mpq/clear$U.lo mpq/clears$U.lo \
mpq/cmp$U.lo mpq/cmp_si$U.lo mpq/cmp_ui$U.lo mpq/div$U.lo \
mpq/get_d$U.lo mpq/get_den$U.lo mpq/get_num$U.lo mpq/get_str$U.lo \
mpq/init$U.lo mpq/inits$U.lo mpq/inp_str$U.lo mpq/inv$U.lo \
mpq/md_2exp$U.lo mpq/mul$U.lo mpq/neg$U.lo mpq/out_str$U.lo \
mpq/set$U.lo mpq/set_den$U.lo mpq/set_num$U.lo \
mpq/set_si$U.lo mpq/set_str$U.lo mpq/set_ui$U.lo \
mpq/equal$U.lo mpq/set_z$U.lo mpq/set_d$U.lo \
mpq/set_f$U.lo mpq/swap$U.lo
MPN_OBJECTS = mpn/fib_table$U.lo mpn/mp_bases$U.lo
PRINTF_OBJECTS = \
printf/asprintf$U.lo printf/asprntffuns$U.lo \
printf/doprnt$U.lo printf/doprntf$U.lo printf/doprnti$U.lo \
printf/fprintf$U.lo \
printf/obprintf$U.lo printf/obvprintf$U.lo printf/obprntffuns$U.lo \
printf/printf$U.lo printf/printffuns$U.lo \
printf/snprintf$U.lo printf/snprntffuns$U.lo \
printf/sprintf$U.lo printf/sprintffuns$U.lo \
printf/vasprintf$U.lo printf/vfprintf$U.lo printf/vprintf$U.lo \
printf/vsnprintf$U.lo printf/vsprintf$U.lo \
printf/repl-vsnprintf$U.lo
SCANF_OBJECTS = \
scanf/doscan$U.lo scanf/fscanf$U.lo scanf/fscanffuns$U.lo \
scanf/scanf$U.lo scanf/sscanf$U.lo scanf/sscanffuns$U.lo \
scanf/vfscanf$U.lo scanf/vscanf$U.lo scanf/vsscanf$U.lo
RANDOM_OBJECTS = \
rand/rand$U.lo rand/randclr$U.lo rand/randdef$U.lo rand/randiset$U.lo \
rand/randlc2s$U.lo rand/randlc2x$U.lo rand/randmt$U.lo \
rand/randmts$U.lo rand/rands$U.lo rand/randsd$U.lo rand/randsdui$U.lo \
rand/randbui$U.lo rand/randmui$U.lo
# no $U for C++ files
CXX_OBJECTS = \
cxx/isfuns.lo cxx/ismpf.lo cxx/ismpq.lo cxx/ismpz.lo cxx/ismpznw.lo \
cxx/limits.lo cxx/osdoprnti.lo cxx/osfuns.lo \
cxx/osmpf.lo cxx/osmpq.lo cxx/osmpz.lo
# In libtool 1.5 it doesn't work to build libgmp.la from the convenience
# libraries like mpz/libmpz.la. Or rather it works, but it ends up putting
# PIC objects into libgmp.a if shared and static are both built. (The PIC
# objects go into mpz/.libs/libmpz.a, and thence into .libs/libgmp.a.)
#
# For now the big lists of objects above are used. Something like mpz/*.lo
# would probably work, but might risk missing something out or getting
# something extra. The source files for each .lo are listed in the
# Makefile.am's in the subdirectories.
#
# Currently, for libgmp, unlike libmp below, we're not using
# -export-symbols, since the tune and speed programs, and perhaps some of
# the test programs, want to access undocumented symbols.
libgmp_la_SOURCES = gmp-impl.h longlong.h \
assert.c compat.c errno.c extract-dbl.c invalid.c memory.c \
mp_bpl.c mp_clz_tab.c mp_dv_tab.c mp_minv_tab.c mp_get_fns.c mp_set_fns.c \
version.c nextprime.c primesieve.c
EXTRA_libgmp_la_SOURCES = tal-debug.c tal-notreent.c tal-reent.c
libgmp_la_DEPENDENCIES = @TAL_OBJECT@ \
$(MPF_OBJECTS) $(MPZ_OBJECTS) $(MPQ_OBJECTS) \
$(MPN_OBJECTS) @mpn_objs_in_libgmp@ \
$(PRINTF_OBJECTS) $(SCANF_OBJECTS) $(RANDOM_OBJECTS)
libgmp_la_LIBADD = $(libgmp_la_DEPENDENCIES)
libgmp_la_LDFLAGS = $(GMP_LDFLAGS) $(LIBGMP_LDFLAGS) \
-version-info $(LIBGMP_LT_CURRENT):$(LIBGMP_LT_REVISION):$(LIBGMP_LT_AGE)
# We need at least one .cc file in $(libgmpxx_la_SOURCES) so automake will
# use $(CXXLINK) rather than the plain C $(LINK). cxx/dummy.cc is that
# file.
@WANT_CXX_TRUE@GMPXX_LTLIBRARIES_OPTION = libgmpxx.la
libgmpxx_la_SOURCES = cxx/dummy.cc
libgmpxx_la_DEPENDENCIES = $(CXX_OBJECTS) libgmp.la
libgmpxx_la_LIBADD = $(libgmpxx_la_DEPENDENCIES)
libgmpxx_la_LDFLAGS = $(GMP_LDFLAGS) $(LIBGMPXX_LDFLAGS) \
-version-info $(LIBGMPXX_LT_CURRENT):$(LIBGMPXX_LT_REVISION):$(LIBGMPXX_LT_AGE)
all: $(BUILT_SOURCES) config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
.SUFFIXES: .c .cc .lo .o .obj
am--refresh: Makefile
@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --gnu --ignore-deps'; \
$(am__cd) $(srcdir) && $(AUTOMAKE) --gnu --ignore-deps \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu --ignore-deps Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --gnu --ignore-deps Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):
config.h: stamp-h1
@if test ! -f $@; then rm -f stamp-h1; else :; fi
@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
stamp-h1: $(srcdir)/config.in $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
($(am__cd) $(top_srcdir) && $(AUTOHEADER))
rm -f stamp-h1
touch $@
distclean-hdr:
-rm -f config.h stamp-h1
gmp.h: $(top_builddir)/config.status $(srcdir)/gmp-h.in
cd $(top_builddir) && $(SHELL) ./config.status $@
install-libLTLIBRARIES: $(lib_LTLIBRARIES)
@$(NORMAL_INSTALL)
@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
list2=; for p in $$list; do \
if test -f $$p; then \
list2="$$list2 $$p"; \
else :; fi; \
done; \
test -z "$$list2" || { \
echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \
echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
$(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
}
uninstall-libLTLIBRARIES:
@$(NORMAL_UNINSTALL)
@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
for p in $$list; do \
$(am__strip_dir) \
echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
$(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
done
clean-libLTLIBRARIES:
-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
test "$$dir" != "$$p" || dir=.; \
echo "rm -f \"$${dir}/so_locations\""; \
rm -f "$${dir}/so_locations"; \
done
libgmp.la: $(libgmp_la_OBJECTS) $(libgmp_la_DEPENDENCIES) $(EXTRA_libgmp_la_DEPENDENCIES)
$(libgmp_la_LINK) -rpath $(libdir) $(libgmp_la_OBJECTS) $(libgmp_la_LIBADD) $(LIBS)
libgmpxx.la: $(libgmpxx_la_OBJECTS) $(libgmpxx_la_DEPENDENCIES) $(EXTRA_libgmpxx_la_DEPENDENCIES)
$(libgmpxx_la_LINK) $(am_libgmpxx_la_rpath) $(libgmpxx_la_OBJECTS) $(libgmpxx_la_LIBADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
distclean-compile:
-rm -f *.tab.c
.c.o:
$(COMPILE) -c $<
.c.obj:
$(COMPILE) -c `$(CYGPATH_W) '$<'`
.c.lo:
$(LTCOMPILE) -c -o $@ $<
.cc.o:
$(CXXCOMPILE) -c -o $@ $<
.cc.obj:
$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
.cc.lo:
$(LTCXXCOMPILE) -c -o $@ $<
dummy.lo: cxx/dummy.cc
$(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o dummy.lo `test -f 'cxx/dummy.cc' || echo '$(srcdir)/'`cxx/dummy.cc
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool config.lt
install-includeHEADERS: $(include_HEADERS)
@$(NORMAL_INSTALL)
@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(includedir)'"; \
$(MKDIR_P) "$(DESTDIR)$(includedir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \
$(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \
done
uninstall-includeHEADERS:
@$(NORMAL_UNINSTALL)
@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir)
install-nodist_includeexecHEADERS: $(nodist_includeexec_HEADERS)
@$(NORMAL_INSTALL)
@list='$(nodist_includeexec_HEADERS)'; test -n "$(includeexecdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(includeexecdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(includeexecdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includeexecdir)'"; \
$(INSTALL_HEADER) $$files "$(DESTDIR)$(includeexecdir)" || exit $$?; \
done
uninstall-nodist_includeexecHEADERS:
@$(NORMAL_UNINSTALL)
@list='$(nodist_includeexec_HEADERS)'; test -n "$(includeexecdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(includeexecdir)'; $(am__uninstall_files_from_dir)
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
@fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
$(RECURSIVE_CLEAN_TARGETS):
@fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
rev=''; for subdir in $$list; do \
if test "$$subdir" = "."; then :; else \
rev="$$subdir $$rev"; \
fi; \
done; \
rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: tags-recursive $(HEADERS) $(SOURCES) config.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) config.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
list='$(SOURCES) $(HEADERS) config.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
$(am__remove_distdir)
test -d "$(distdir)" || mkdir "$(distdir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
$(am__make_dryrun) \
|| test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
dir1=$$subdir; dir2="$(top_distdir)"; \
$(am__relativize); \
new_top_distdir=$$reldir; \
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$new_top_distdir" \
distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" distdir="$(distdir)" \
dist-hook
-test -n "$(am__skip_mode_fix)" \
|| find "$(distdir)" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
dist-bzip2: distdir
tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
$(am__remove_distdir)
dist-lzip: distdir
tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
$(am__remove_distdir)
dist-lzma: distdir
tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
$(am__remove_distdir)
dist-xz: distdir
tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
$(am__remove_distdir)
dist-tarZ: distdir
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__remove_distdir)
dist-shar: distdir
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
$(am__remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
$(am__remove_distdir)
dist dist-all: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lzma*) \
lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
*.tar.lz*) \
lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
*.tar.xz*) \
xz -dc $(distdir).tar.xz | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
esac
chmod -R a-w $(distdir); chmod u+w $(distdir)
mkdir $(distdir)/_build
mkdir $(distdir)/_inst
chmod a-w $(distdir)
test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& am__cwd=`pwd` \
&& $(am__cd) $(distdir)/_build \
&& ../configure --srcdir=.. --prefix="$$dc_install_base" \
$(AM_DISTCHECK_CONFIGURE_FLAGS) \
$(DISTCHECK_CONFIGURE_FLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$$dc_destdir") \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
} || { rm -rf "$$dc_destdir"; exit 1; }) \
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
&& cd "$$am__cwd" \
|| exit 1
$(am__remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
@test -n '$(distuninstallcheck_dir)' || { \
echo 'ERROR: trying to run $@ with an empty' \
'$$(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
$(am__cd) '$(distuninstallcheck_dir)' || { \
echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
fi ; \
$(distuninstallcheck_listfiles) ; \
exit 1; } >&2
distcleancheck: distclean
@if test '$(srcdir)' = . ; then \
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
exit 1 ; \
fi
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left in build directory after distclean:" ; \
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
check: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) check-recursive
all-am: Makefile $(LTLIBRARIES) $(HEADERS) config.h
installdirs: installdirs-recursive
installdirs-am:
for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)" "$(DESTDIR)$(includeexecdir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
clean: clean-recursive
clean-am: clean-generic clean-libLTLIBRARIES clean-libtool clean-local \
mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
distclean-hdr distclean-libtool distclean-local distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
html-am:
info: info-recursive
info-am:
install-data-am: install-includeHEADERS
@$(NORMAL_INSTALL)
$(MAKE) $(AM_MAKEFLAGS) install-data-hook
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am: install-libLTLIBRARIES \
install-nodist_includeexecHEADERS
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-compile mostlyclean-generic \
mostlyclean-libtool
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am: uninstall-includeHEADERS uninstall-libLTLIBRARIES \
uninstall-nodist_includeexecHEADERS
.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \
ctags-recursive install install-am install-data-am \
install-strip tags-recursive
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am am--refresh check check-am clean clean-generic \
clean-libLTLIBRARIES clean-libtool clean-local ctags \
ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-hook \
dist-lzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \
distcheck distclean distclean-compile distclean-generic \
distclean-hdr distclean-libtool distclean-local distclean-tags \
distcleancheck distdir distuninstallcheck dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-data-hook install-dvi install-dvi-am \
install-exec install-exec-am install-html install-html-am \
install-includeHEADERS install-info install-info-am \
install-libLTLIBRARIES install-man \
install-nodist_includeexecHEADERS install-pdf install-pdf-am \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs installdirs-am maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-compile \
mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
tags tags-recursive uninstall uninstall-am \
uninstall-includeHEADERS uninstall-libLTLIBRARIES \
uninstall-nodist_includeexecHEADERS
install-data-hook:
@echo ''
@echo '+-------------------------------------------------------------+'
@echo '| CAUTION: |'
@echo '| |'
@echo '| If you have not already run "make check", then we strongly |'
@echo '| recommend you do so. |'
@echo '| |'
@echo '| GMP has been carefully tested by its authors, but compilers |'
@echo '| are all too often released with serious bugs. GMP tends to |'
@echo '| explore interesting corners in compilers and has hit bugs |'
@echo '| on quite a few occasions. |'
@echo '| |'
@echo '+-------------------------------------------------------------+'
@echo ''
fac_table.h: gen-fac$(EXEEXT_FOR_BUILD)
./gen-fac $(GMP_LIMB_BITS) $(GMP_NAIL_BITS) >fac_table.h || (rm -f fac_table.h; exit 1)
gen-fac$(EXEEXT_FOR_BUILD): gen-fac$(U_FOR_BUILD).c bootstrap.c
$(CC_FOR_BUILD) `test -f 'gen-fac$(U_FOR_BUILD).c' || echo '$(srcdir)/'`gen-fac$(U_FOR_BUILD).c -o gen-fac$(EXEEXT_FOR_BUILD)
fib_table.h: gen-fib$(EXEEXT_FOR_BUILD)
./gen-fib header $(GMP_LIMB_BITS) $(GMP_NAIL_BITS) >fib_table.h || (rm -f fib_table.h; exit 1)
mpn/fib_table.c: gen-fib$(EXEEXT_FOR_BUILD)
./gen-fib table $(GMP_LIMB_BITS) $(GMP_NAIL_BITS) >mpn/fib_table.c || (rm -f mpn/fib_table.c; exit 1)
gen-fib$(EXEEXT_FOR_BUILD): gen-fib$(U_FOR_BUILD).c bootstrap.c
$(CC_FOR_BUILD) `test -f 'gen-fib$(U_FOR_BUILD).c' || echo '$(srcdir)/'`gen-fib$(U_FOR_BUILD).c -o gen-fib$(EXEEXT_FOR_BUILD)
mp_bases.h: gen-bases$(EXEEXT_FOR_BUILD)
./gen-bases header $(GMP_LIMB_BITS) $(GMP_NAIL_BITS) >mp_bases.h || (rm -f mp_bases.h; exit 1)
mpn/mp_bases.c: gen-bases$(EXEEXT_FOR_BUILD)
./gen-bases table $(GMP_LIMB_BITS) $(GMP_NAIL_BITS) >mpn/mp_bases.c || (rm -f mpn/mp_bases.c; exit 1)
gen-bases$(EXEEXT_FOR_BUILD): gen-bases$(U_FOR_BUILD).c bootstrap.c
$(CC_FOR_BUILD) `test -f 'gen-bases$(U_FOR_BUILD).c' || echo '$(srcdir)/'`gen-bases$(U_FOR_BUILD).c -o gen-bases$(EXEEXT_FOR_BUILD) $(LIBM_FOR_BUILD)
trialdivtab.h: gen-trialdivtab$(EXEEXT_FOR_BUILD)
./gen-trialdivtab $(GMP_LIMB_BITS) 8000 >trialdivtab.h || (rm -f trialdivtab.h; exit 1)
gen-trialdivtab$(EXEEXT_FOR_BUILD): gen-trialdivtab$(U_FOR_BUILD).c bootstrap.c
$(CC_FOR_BUILD) `test -f 'gen-trialdivtab$(U_FOR_BUILD).c' || echo '$(srcdir)/'`gen-trialdivtab$(U_FOR_BUILD).c -o gen-trialdivtab$(EXEEXT_FOR_BUILD) $(LIBM_FOR_BUILD)
mpn/jacobitab.h: gen-jacobitab$(EXEEXT_FOR_BUILD)
./gen-jacobitab >mpn/jacobitab.h || (rm -f mpn/jacobitab.h; exit 1)
gen-jacobitab$(EXEEXT_FOR_BUILD): gen-jacobitab$(U_FOR_BUILD).c
$(CC_FOR_BUILD) `test -f 'gen-jacobitab$(U_FOR_BUILD).c' || echo '$(srcdir)/'`gen-jacobitab$(U_FOR_BUILD).c -o gen-jacobitab$(EXEEXT_FOR_BUILD)
mpn/perfsqr.h: gen-psqr$(EXEEXT_FOR_BUILD)
./gen-psqr $(GMP_LIMB_BITS) $(GMP_NAIL_BITS) >mpn/perfsqr.h || (rm -f mpn/perfsqr.h; exit 1)
gen-psqr$(EXEEXT_FOR_BUILD): gen-psqr$(U_FOR_BUILD).c bootstrap.c
$(CC_FOR_BUILD) `test -f 'gen-psqr$(U_FOR_BUILD).c' || echo '$(srcdir)/'`gen-psqr$(U_FOR_BUILD).c -o gen-psqr$(EXEEXT_FOR_BUILD) $(LIBM_FOR_BUILD)
# Avoid: CVS - cvs directories
# *~ - emacs backups
# .#* - cvs merge originals
#
# *~ and .#* only occur when a whole directory without it's own Makefile.am
# is distributed, like "doc" or the mpn cpu subdirectories.
#
dist-hook:
-find $(distdir) \( -name CVS -type d \) -o -name "*~" -o -name ".#*" \
| xargs rm -rf
cp "$(srcdir)"/mini-gmp/tests/*.[ch] "$(distdir)/mini-gmp/tests"
# grep -F $(VERSION) $(srcdir)/Makefile.am \
# | grep -q "^# *$(VERSION) *$(LIBGMP_LT_CURRENT):$(LIBGMP_LT_REVISION):$(LIBGMP_LT_AGE) *$(LIBGMPXX_LT_CURRENT):$(LIBGMPXX_LT_REVISION):$(LIBGMPXX_LT_AGE)"
# test -z "`sed -n 's/^# *[0-9]*\.[0-9]*\.[0-9]* *\([0-9]*:[0-9]*:[0-9]*\) *\([0-9]*:[0-9]*:[0-9]*\) *\([0-9]*:[0-9]*:[0-9]*\).*/A\1\nB\2\nC\3/p' $(srcdir)/Makefile.am | grep -v 'A6:3:3\|B3:5:0\|C4:7:1' | sort | uniq -d`"
.PHONY: check-mini-gmp clean-mini-gmp
check-mini-gmp:
abs_srcdir="`cd $(srcdir) && pwd`" ; \
$(MKDIR_P) mini-gmp/tests \
&& cd mini-gmp/tests \
&& LD_LIBRARY_PATH="../../.libs:$$LD_LIBRARY_PATH" \
DYLD_LIBRARY_PATH="../../.libs:$$DYLD_LIBRARY_PATH" \
$(MAKE) -f "$$abs_srcdir/mini-gmp/tests/Makefile" \
VPATH="$$abs_srcdir/mini-gmp/tests" \
srcdir="$$abs_srcdir/mini-gmp/tests" \
MINI_GMP_DIR="$$abs_srcdir/mini-gmp" \
LDFLAGS="-L../../.libs" \
LIBS="-lgmp -lm" \
CC="$(CC_FOR_BUILD)" EXTRA_CFLAGS="-g -I../.." check
clean-mini-gmp:
if [ -d mini-gmp/tests ] ; then \
abs_srcdir="`cd $(srcdir) && pwd`" ; \
cd mini-gmp/tests \
&& $(MAKE) -f "$$abs_srcdir/mini-gmp/tests/Makefile" clean ; \
fi
clean-local: clean-mini-gmp
distclean-local: clean-mini-gmp
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: