# Makefile.in generated by automake 1.15 from Makefile.am.
# Makefile. Generated from Makefile.in by configure.
# Copyright (C) 1994-2014 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
# Copyright (C) 2012-2015, Gabriel Dos Reis.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
#
# - Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
#
# - Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
#
# - Neither the name of The Numerical Algorithms Group Ltd. nor the
# names of its contributors may be used to endorse or promote products
# derived from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
# IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
# PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
# OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
# PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# The build system is set up so that if `make all' completes successfully
# then `make install' will not modify any file in the build directory.
# Consequently it is possible to issue `make all' as an one user
# to build the whole system, and install it as another user. The typical
# case is: on Unix-like system, build as ordinary user, then install as
# superuser.
# The build flow of OpenAxiom seems, at first sight, a bit intricate to
# describe. This description is STILL IN WORK IN PROGRESS. Therefore
# it is incorrekt, incomplet, and iNconSiStenT.
VPATH = ../open-axiom
am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \
false; \
elif test -n '$(MAKE_HOST)'; then \
true; \
elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
true; \
else \
false; \
fi; \
}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/openaxiom
pkgincludedir = $(includedir)/openaxiom
pkglibdir = $(libdir)/openaxiom
pkglibexecdir = $(libexecdir)/openaxiom
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = x86_64-unknown-linux-gnu
host_triplet = x86_64-unknown-linux-gnu
target_triplet = x86_64-unknown-linux-gnu
subdir = .
SUBDIRS =
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/config/libtool.m4 \
$(top_srcdir)/config/ltoptions.m4 \
$(top_srcdir)/config/ltsugar.m4 \
$(top_srcdir)/config/ltversion.m4 \
$(top_srcdir)/config/lt~obsolete.m4 \
$(top_srcdir)/config/open-axiom.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
$(am__configure_deps) $(am__DIST_COMMON)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config/openaxiom-c-macros.h
CONFIG_CLEAN_FILES = src/lib/Makefile src/hyper/Makefile \
src/driver/Makefile src/lisp/Makefile src/interp/Makefile \
src/share/Makefile src/input/Makefile src/etc/Makefile \
src/doc/Makefile src/clef/Makefile src/sman/Makefile \
src/graph/Makefile src/graph/Gdraws/Makefile \
src/graph/view2D/Makefile src/graph/view3D/Makefile \
src/graph/viewAlone/Makefile src/graph/viewman/Makefile \
src/gui/gui.pro ${target}/include/open-axiom/config
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_$(V))
am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
am__v_at_1 =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
ctags-recursive dvi-recursive html-recursive info-recursive \
install-data-recursive install-dvi-recursive \
install-exec-recursive install-html-recursive \
install-info-recursive install-pdf-recursive \
install-ps-recursive install-recursive installcheck-recursive \
installdirs-recursive pdf-recursive ps-recursive \
tags-recursive uninstall-recursive
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
$(RECURSIVE_TARGETS) \
$(RECURSIVE_CLEAN_TARGETS) \
$(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
cscope distdir dist dist-all distcheck
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
CSCOPE = cscope
am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/config/compile \
$(top_srcdir)/config/config.guess \
$(top_srcdir)/config/config.sub \
$(top_srcdir)/config/install-sh $(top_srcdir)/config/ltmain.sh \
$(top_srcdir)/config/missing \
$(top_srcdir)/config/mkinstalldirs \
$(top_srcdir)/config/openaxiom-c-macros.h.in \
$(top_srcdir)/config/setup-dep.mk \
$(top_srcdir)/config/var-def.mk \
$(top_srcdir)/src/clef/Makefile.in \
$(top_srcdir)/src/doc/Makefile.in \
$(top_srcdir)/src/driver/Makefile.in \
$(top_srcdir)/src/etc/Makefile.in \
$(top_srcdir)/src/graph/Gdraws/Makefile.in \
$(top_srcdir)/src/graph/Makefile.in \
$(top_srcdir)/src/graph/view2D/Makefile.in \
$(top_srcdir)/src/graph/view3D/Makefile.in \
$(top_srcdir)/src/graph/viewAlone/Makefile.in \
$(top_srcdir)/src/graph/viewman/Makefile.in \
$(top_srcdir)/src/gui/gui.pro.in \
$(top_srcdir)/src/hyper/Makefile.in \
$(top_srcdir)/src/input/Makefile.in \
$(top_srcdir)/src/interp/Makefile.in \
$(top_srcdir)/src/lib/Makefile.in \
$(top_srcdir)/src/lisp/Makefile.in \
$(top_srcdir)/src/share/Makefile.in \
$(top_srcdir)/src/sman/Makefile.in AUTHORS COPYING ChangeLog \
INSTALL NEWS TODO config/compile config/config.guess \
config/config.sub config/depcomp config/install-sh \
config/ltmain.sh config/missing config/mkinstalldirs
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
if test -d "$(distdir)"; then \
find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
&& rm -rf "$(distdir)" \
|| { sleep 5 && rm -rf "$(distdir)"; }; \
else :; fi
am__post_remove_distdir = $(am__remove_distdir)
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]*/*,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
if test "$$first" != "."; then \
if test "$$first" = ".."; then \
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
else \
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
if test "$$first2" = "$$first"; then \
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
else \
dir2="../$$dir2"; \
fi; \
dir0="$$dir0"/"$$first"; \
fi; \
fi; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
DIST_TARGETS = dist-gzip
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
| sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = ${SHELL} /projects/77750c71-ec7b-4962-bf55-a49ff5065fb6/open-axiom/config/missing aclocal-1.15
AMTAR = $${TAR-tar}
AM_DEFAULT_VERBOSITY = 1
AR = ar
AS = as
AUTOCONF = ${SHELL} /projects/77750c71-ec7b-4962-bf55-a49ff5065fb6/open-axiom/config/missing autoconf
AUTOHEADER = ${SHELL} /projects/77750c71-ec7b-4962-bf55-a49ff5065fb6/open-axiom/config/missing autoheader
AUTOMAKE = ${SHELL} /projects/77750c71-ec7b-4962-bf55-a49ff5065fb6/open-axiom/config/missing automake-1.15
AWK = gawk
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -g -O2 -O2 -Wall
CPP = gcc -E
CPPFLAGS = -m64 -D_GNU_SOURCE
CXX = g++
CXXCPP = g++ -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -std=c++11 -g -O2 -O2 -Wall
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DLLTOOL = false
DSYMUTIL =
DUMPBIN =
ECHO_C =
ECHO_N = -n
ECHO_T =
EGREP = /bin/grep -E
EXEEXT =
FASLEXT = fasl
FGREP = /bin/grep -F
# Configure options to GCL.
GCLOPTS = --disable-tkconfig --disable-x --disable-xgcl --disable-tcltk
GREP = /bin/grep
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
LATEX =
LD = /usr/bin/ld -m elf_x86_64
LDFLAGS = -m64
LIBOBJS =
LIBS = -lutil
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIBTOOL_DEPS = ../open-axiom/config/ltmain.sh
LIPO =
LLVM_CONFIG = llvm-config
LNKEXT = $(FASLEXT)
LN_S = ln -s
LTLIBOBJS =
MAKE = make
MAKEINDEX = makeindex
MAKEINFO = ${SHELL} /projects/77750c71-ec7b-4962-bf55-a49ff5065fb6/open-axiom/config/missing makeinfo
MANIFEST_TOOL = :
MKDIR_P = /bin/mkdir -p
MKTEMP = mktemp
NM = /usr/bin/nm -B
NMEDIT =
OA_LISP = sbcl
OA_QT_MOC = moc
OA_QT_QMAKE = qmake
OA_WINDOWS_POWERSHELL =
OBJDUMP = objdump
OBJEXT = o
OTOOL =
OTOOL64 =
PACKAGE = openaxiom
PACKAGE_BUGREPORT = [email protected]
PACKAGE_NAME = OpenAxiom
PACKAGE_STRING = OpenAxiom 1.5.0-2016-01-24
PACKAGE_TARNAME = openaxiom
PACKAGE_URL =
PACKAGE_VERSION = 1.5.0-2016-01-24
PATH_SEPARATOR = :
PDFLATEX = /usr/bin/pdflatex
RANLIB = ranlib
SED = /bin/sed
SET_MAKE =
SHELL = /bin/bash
STRIP = strip
TOUCH = touch
VERSION = 1.5.0-2016-01-24
XMKMF =
X_CFLAGS =
X_EXTRA_LIBS =
X_LIBS =
X_PRE_LIBS = -lXpm -lSM -lICE
abs_builddir = /projects/77750c71-ec7b-4962-bf55-a49ff5065fb6/open-axiom-build
abs_srcdir = /projects/77750c71-ec7b-4962-bf55-a49ff5065fb6/open-axiom-build/../open-axiom
abs_top_builddir = /projects/77750c71-ec7b-4962-bf55-a49ff5065fb6/open-axiom-build
abs_top_srcdir = /projects/77750c71-ec7b-4962-bf55-a49ff5065fb6/open-axiom-build/../open-axiom
ac_ct_AR = ar
ac_ct_CC = gcc
ac_ct_CXX = g++
ac_ct_DUMPBIN =
am__include = include
am__leading_dot = .
am__quote =
am__tar = $${TAR-tar} chof - "$$tardir"
am__untar = $${TAR-tar} xf -
bindir = ${exec_prefix}/bin
build = x86_64-unknown-linux-gnu
build_alias =
build_cpu = x86_64
build_os = linux-gnu
build_vendor = unknown
builddir = .
char_type = char
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
double_type = double
dvidir = ${docdir}
exec_prefix = ${prefix}
float_type = float
host = x86_64-unknown-linux-gnu
host_alias =
host_cpu = x86_64
host_os = linux-gnu
host_vendor = unknown
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = ${SHELL} /projects/77750c71-ec7b-4962-bf55-a49ff5065fb6/open-axiom/config/install-sh
int_type = int
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
libext = a
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
mandir = ${datarootdir}/man
mkdir_p = $(MKDIR_P)
oa_c_macros = $(oa_configdir)/axiom-c-macros.h
oa_c_runtime = terminal_io graphics
oa_c_runtime_extra =
oa_cflags =
oa_configdir = $(top_builddir)/config
oa_delay_ffi = yes
oa_editor = /usr/bin/vi
oa_enable_checking = no
oa_enable_profiling = no
oa_enable_threads = no
oa_eval_flags = --no-sysinit --no-userinit --disable-debugger --eval
oa_extra_cxxflags = -Wno-mismatched-tags -Wno-string-plus-int
oa_host_has_regex = yes
oa_keep_files =
oa_lisp_flavor = sbcl
oa_optimize_options = speed
oa_quiet_flags = --noinform --noprint
oa_shrlib_flags = -shared
oa_shrobj_flags = -prefer-pic
oa_src_algdir = $(oa_src_srcdir)/algebra
oa_src_datadir = $(oa_src_srcdir)/share
oa_src_docdir = $(oa_src_srcdir)/doc
oa_src_srcdir = $(top_srcdir)/src
oa_src_texdir = $(oa_src_datadir)/tex
oa_standard_linking = no
oa_target_bindir = $(oa_targetdir)/bin
oa_target_datadir = $(oa_targetdir)/share
oa_target_docdir = $(oa_targetdir)/doc
oa_target_includedir = $(oa_targetdir)/include
oa_target_libdir = $(oa_targetdir)/lib
oa_target_srcdir = $(oa_targetdir)/src
oa_target_texdir = $(oa_target_datadir)/texmf/tex
oa_targetdir = $(top_builddir)/$(target)
oa_use_dynamic_lib = yes
oa_use_libtool_for_shared_lib = no
oa_use_llvm = yes
oa_use_x = yes
oldincludedir = /usr/include
open_axiom_installdir = ${exec_prefix}/lib/open-axiom/x86_64-unknown-linux-gnu/1.5.0-2016-01-24
pdfdir = ${docdir}
pointer_type = (* t)
prefix = /projects/77750c71-ec7b-4962-bf55-a49ff5065fb6
program_transform_name = s,x,x,
psdir = ${docdir}
sbindir = ${exec_prefix}/sbin
shared_ext = .so
sharedstatedir = ${prefix}/com
srcdir = ../open-axiom
string_type = c-string
sysconfdir = ${prefix}/etc
target = x86_64-unknown-linux-gnu
target_alias =
target_cpu = x86_64
target_os = linux-gnu
target_vendor = unknown
top_build_prefix =
top_builddir = .
top_srcdir = ../open-axiom
void_type = void
ACLOCAL_AMFLAGS = -I config #--install --output=config/aclocal.m4
DIST_SUBDIRS = src
oa_installdir = ${exec_prefix}/lib/open-axiom/x86_64-unknown-linux-gnu/1.5.0-2016-01-24
OA_SRC_TARGETS = \
all-local \
all-src \
all-algebra \
all-algstrap \
all-initdb \
all-asq \
all-axiomsys \
all-boot \
all-share \
all-clef \
all-doc \
all-graph \
all-gui \
all-hyper \
all-input \
all-interpsys \
all-lib \
all-lisp \
all-sman \
all-driver \
all-databases \
all-utils \
all-rt
all: all-recursive
.SUFFIXES:
am--refresh: Makefile
@:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
$(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: $(am__configure_deps)
$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):
config/openaxiom-c-macros.h: config/stamp-h1
@test -f $@ || rm -f config/stamp-h1
@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) config/stamp-h1
config/stamp-h1: $(top_srcdir)/config/openaxiom-c-macros.h.in $(top_builddir)/config.status
@rm -f config/stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status config/openaxiom-c-macros.h
$(top_srcdir)/config/openaxiom-c-macros.h.in: $(am__configure_deps)
($(am__cd) $(top_srcdir) && $(AUTOHEADER))
rm -f config/stamp-h1
touch $@
distclean-hdr:
-rm -f config/openaxiom-c-macros.h config/stamp-h1
src/lib/Makefile: $(top_builddir)/config.status $(top_srcdir)/config/var-def.mk $(top_srcdir)/src/lib/Makefile.in $(top_srcdir)/config/setup-dep.mk
cd $(top_builddir) && $(SHELL) ./config.status $@
src/hyper/Makefile: $(top_builddir)/config.status $(top_srcdir)/config/var-def.mk $(top_srcdir)/src/hyper/Makefile.in $(top_srcdir)/config/setup-dep.mk
cd $(top_builddir) && $(SHELL) ./config.status $@
src/driver/Makefile: $(top_builddir)/config.status $(top_srcdir)/config/var-def.mk $(top_srcdir)/src/driver/Makefile.in $(top_srcdir)/config/setup-dep.mk
cd $(top_builddir) && $(SHELL) ./config.status $@
src/lisp/Makefile: $(top_builddir)/config.status $(top_srcdir)/config/var-def.mk $(top_srcdir)/src/lisp/Makefile.in $(top_srcdir)/config/setup-dep.mk
cd $(top_builddir) && $(SHELL) ./config.status $@
src/interp/Makefile: $(top_builddir)/config.status $(top_srcdir)/config/var-def.mk $(top_srcdir)/src/interp/Makefile.in $(top_srcdir)/config/setup-dep.mk
cd $(top_builddir) && $(SHELL) ./config.status $@
src/share/Makefile: $(top_builddir)/config.status $(top_srcdir)/config/var-def.mk $(top_srcdir)/src/share/Makefile.in $(top_srcdir)/config/setup-dep.mk
cd $(top_builddir) && $(SHELL) ./config.status $@
src/input/Makefile: $(top_builddir)/config.status $(top_srcdir)/config/var-def.mk $(top_srcdir)/src/input/Makefile.in $(top_srcdir)/config/setup-dep.mk
cd $(top_builddir) && $(SHELL) ./config.status $@
src/etc/Makefile: $(top_builddir)/config.status $(top_srcdir)/config/var-def.mk $(top_srcdir)/src/etc/Makefile.in $(top_srcdir)/config/setup-dep.mk
cd $(top_builddir) && $(SHELL) ./config.status $@
src/doc/Makefile: $(top_builddir)/config.status $(top_srcdir)/config/var-def.mk $(top_srcdir)/src/doc/Makefile.in $(top_srcdir)/config/setup-dep.mk
cd $(top_builddir) && $(SHELL) ./config.status $@
src/clef/Makefile: $(top_builddir)/config.status $(top_srcdir)/config/var-def.mk $(top_srcdir)/src/clef/Makefile.in $(top_srcdir)/config/setup-dep.mk
cd $(top_builddir) && $(SHELL) ./config.status $@
src/sman/Makefile: $(top_builddir)/config.status $(top_srcdir)/config/var-def.mk $(top_srcdir)/src/sman/Makefile.in $(top_srcdir)/config/setup-dep.mk
cd $(top_builddir) && $(SHELL) ./config.status $@
src/graph/Makefile: $(top_builddir)/config.status $(top_srcdir)/config/var-def.mk $(top_srcdir)/src/graph/Makefile.in $(top_srcdir)/config/setup-dep.mk
cd $(top_builddir) && $(SHELL) ./config.status $@
src/graph/Gdraws/Makefile: $(top_builddir)/config.status $(top_srcdir)/config/var-def.mk $(top_srcdir)/src/graph/Gdraws/Makefile.in $(top_srcdir)/config/setup-dep.mk
cd $(top_builddir) && $(SHELL) ./config.status $@
src/graph/view2D/Makefile: $(top_builddir)/config.status $(top_srcdir)/config/var-def.mk $(top_srcdir)/src/graph/view2D/Makefile.in $(top_srcdir)/config/setup-dep.mk
cd $(top_builddir) && $(SHELL) ./config.status $@
src/graph/view3D/Makefile: $(top_builddir)/config.status $(top_srcdir)/config/var-def.mk $(top_srcdir)/src/graph/view3D/Makefile.in $(top_srcdir)/config/setup-dep.mk
cd $(top_builddir) && $(SHELL) ./config.status $@
src/graph/viewAlone/Makefile: $(top_builddir)/config.status $(top_srcdir)/config/var-def.mk $(top_srcdir)/src/graph/viewAlone/Makefile.in $(top_srcdir)/config/setup-dep.mk
cd $(top_builddir) && $(SHELL) ./config.status $@
src/graph/viewman/Makefile: $(top_builddir)/config.status $(top_srcdir)/config/var-def.mk $(top_srcdir)/src/graph/viewman/Makefile.in $(top_srcdir)/config/setup-dep.mk
cd $(top_builddir) && $(SHELL) ./config.status $@
src/gui/gui.pro: $(top_builddir)/config.status $(top_srcdir)/src/gui/gui.pro.in
cd $(top_builddir) && $(SHELL) ./config.status $@
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool config.lt
# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
# (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
@fail=; \
if $(am__make_keepgoing); then \
failcom='fail=yes'; \
else \
failcom='exit 1'; \
fi; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: ctags-recursive
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
test ! -s cscope.files \
|| $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-recursive
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
distdir: $(DISTFILES)
$(am__remove_distdir)
test -d "$(distdir)" || mkdir "$(distdir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
$(am__make_dryrun) \
|| test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
dir1=$$subdir; dir2="$(top_distdir)"; \
$(am__relativize); \
new_top_distdir=$$reldir; \
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$new_top_distdir" \
distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
-test -n "$(am__skip_mode_fix)" \
|| find "$(distdir)" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__post_remove_distdir)
dist-bzip2: distdir
tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
$(am__post_remove_distdir)
dist-lzip: distdir
tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
$(am__post_remove_distdir)
dist-xz: distdir
tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
$(am__post_remove_distdir)
dist-tarZ: distdir
@echo WARNING: "Support for distribution archives compressed with" \
"legacy program 'compress' is deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__post_remove_distdir)
dist-shar: distdir
@echo WARNING: "Support for shar distribution archives is" \
"deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
$(am__post_remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
$(am__post_remove_distdir)
dist dist-all:
$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
$(am__post_remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lz*) \
lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
*.tar.xz*) \
xz -dc $(distdir).tar.xz | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
esac
chmod -R a-w $(distdir)
chmod u+w $(distdir)
mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
chmod a-w $(distdir)
test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& am__cwd=`pwd` \
&& $(am__cd) $(distdir)/_build/sub \
&& ../../configure \
$(AM_DISTCHECK_CONFIGURE_FLAGS) \
$(DISTCHECK_CONFIGURE_FLAGS) \
--srcdir=../.. --prefix="$$dc_install_base" \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$$dc_destdir") \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
} || { rm -rf "$$dc_destdir"; exit 1; }) \
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
&& cd "$$am__cwd" \
|| exit 1
$(am__post_remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
@test -n '$(distuninstallcheck_dir)' || { \
echo 'ERROR: trying to run $@ with an empty' \
'$$(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
$(am__cd) '$(distuninstallcheck_dir)' || { \
echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
fi ; \
$(distuninstallcheck_listfiles) ; \
exit 1; } >&2
distcleancheck: distclean
@if test '$(srcdir)' = . ; then \
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
exit 1 ; \
fi
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left in build directory after distclean:" ; \
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile
installdirs: installdirs-recursive
installdirs-am:
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-generic clean-libtool clean-local mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-hdr \
distclean-libtool distclean-local distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
html-am:
info: info-recursive
info-am:
install-data-am:
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am:
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-libtool \
mostlyclean-local
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am:
.MAKE: $(am__recursive_targets) install-am install-strip
.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
am--refresh check check-am clean clean-cscope clean-generic \
clean-libtool clean-local cscope cscopelist-am ctags ctags-am \
dist dist-all dist-bzip2 dist-gzip dist-lzip dist-shar \
dist-tarZ dist-xz dist-zip distcheck distclean \
distclean-generic distclean-hdr distclean-libtool \
distclean-local distclean-tags distcleancheck distdir \
distuninstallcheck dvi dvi-am html html-am info info-am \
install install-am install-data install-data-am install-dvi \
install-dvi-am install-exec install-exec-am install-html \
install-html-am install-info install-info-am install-man \
install-pdf install-pdf-am install-ps install-ps-am \
install-strip installcheck installcheck-am installdirs \
installdirs-am maintainer-clean maintainer-clean-generic \
mostlyclean mostlyclean-generic mostlyclean-libtool \
mostlyclean-local pdf pdf-am ps ps-am tags tags-am uninstall \
uninstall-am
.PRECIOUS: Makefile
.PHONY: $(OA_SRC_TARGETS)
.PHONY: all-layer-%
all-layer-%:
cd src && $(MAKE) $(AM_MAKEFLAGS) $@
#all-recursive all-boot all-lisp all-interpsys all-axiomsys \
# all-algebra all-algstrap all-input all-src all-local: all-gcl
all: all-local
$(OA_SRC_TARGETS):
cd src && $(MAKE) $(AM_MAKEFLAGS) $@
.PHONY: all-gcl
all-gcl: $(oa_target_bindir)/gcl$(EXEEXT)
$(oa_target_bindir)/gcl$(EXEEXT):
if test "$(srcdir)" != "$(builddir)" -a ! -d gcl; then \
cp -r "$(srcdir)"/gcl "$(builddir)"; \
fi; cd gcl; \
./configure --prefix="$(abs_top_builddir)/$(target)" ${GCLOPTS} && \
$(MAKE) $(AM_MAKEFLAGS) && $(MAKE) $(AM_MAKEFLAGS) install
install:
@echo Installing OpenAxiom in $(DESTDIR)$(prefix)
@$(mkinstalldirs) "$(DESTDIR)$(oa_installdir)"
cp -pr "$(builddir)"/$(target)/* "$(DESTDIR)$(oa_installdir)"
rm -f "$(DESTDIR)$(bindir)"/open-axiom
@$(mkinstalldirs) "$(DESTDIR)$(bindir)"
$(INSTALL_PROGRAM) src/driver/open-axiom$(EXEEXT) "$(DESTDIR)$(bindir)"
@echo OpenAxiom installation finished.
.PHONY: check
check:
cd src && $(MAKE) $(AM_MAKEFLAGS) all-check
mostlyclean-local:
cd src && $(MAKE) $(AM_MAKEFLAGS) mostlyclean
clean-local:
cd src && $(MAKE) $(AM_MAKEFLAGS) clean
distclean-local:
cd src && $(MAKE) $(AM_MAKEFLAGS) distclean
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
